Re: OT (slightly) What is the "best" processor for a new project?

From	Mikael Nordman <oh2aun@invalid.com>
Newsgroups	comp.lang.forth
Subject	Re: OT (slightly) What is the "best" processor for a new project?
Date	2013-05-29 19:31 +0200
Organization	A noiseless patient Spider
Message-ID	<ko5a9g$9ip$1@dont-email.me> (permalink)
References	(2 earlier) <4PydnUjo3esvrj7MnZ2dnUVZ_vOdnZ2d@supernews.com> <42a4acc3-5dc8-4ed6-a535-111eb56a93d3@googlegroups.com> <89edncV_Bv8oCD7MnZ2dnUVZ_r-dnZ2d@supernews.com> <f69675e2-f9e1-4c66-9691-dfa473196557@googlegroups.com> <ko5249$690$1@online.de>

Show all headers | View raw

On 29.5.2013 16:08, Bernd Paysan wrote:
> oh2aun@gmail.com wrote:
>>> This is still rather fugly.  It's a consequence of having multiple
>>> memory spaces, and IMHO there's nothing elegant and symmetric about
>>> that.
>>
>>> Andrew.
>>
>> Yes but...
>> The original question was about the elegance of the instruction set. Not
>> about the memory architecture.
>>
>> If you have flash, eeprom and ram in your system you are bound to have
>> different memory spaces, that need to be accessed in different ways.
>
> No, not at all.  All you need is a memory mapping in hardware, which maps
> different memories to different addresses.
>
Yes of course you can do the mapping in hardware. But still you cannot
write to flash _randomly_. You need to read the flash block to a buffer 
in ram. Erase the flash block. Write your data to the ram buffer. And 
flash the ram buffer.

If your code does an read-modify-write to the memory in the flash 
buffer, it means that you have to have a branch in the @ and ! 
instructions, in order to check if your data is in the ram buffer or in 
flash.

At least all flash controllers I have seen works like this.
Maybe there is one that does the block buffering in ram automatically ?

On a non-Harward architecture you can make a Forth that executes code 
from ram and then dumps it to flash afterwards. But then you have to 
handle the flash in a similar way as a block file system.

In FalshForth the above block mapping is handled inside @ and !.
This is the only way to make a transparent read/write random access to 
flash.

With this abstraction you can then
write a Forth system where the same user code can perform CREATE ALLOT 
TYPE CMOVE DUMP , C, etc. on data space that resides in any type of 
memory. Many find that very convinient.

But most Forthers seem to prefer to have @ I@ E@ ! I! E! CREATE ECREATE 
ICREATE ALLOT IALLOT EALLOT etc. etc. or to have read/write data space 
only in ram.

> I remember the discussion with the customer when we were to embed an 8051 in
> the touch screen controller, with 8k RAM and 64k Flash (of which 56k were to
> be used for the actual application).  I mapped that all into the same
> address space, which made it much easier for the customer to use than the
> typical 8051 harward architecture.  The customer also said "we need a small
> ROM for flashing the flash" - and no, they didn't.  Because flashing the
> flash from a program in flash is possible - the waiting time then needs to
> be in hardware, not in software.  Much more convenient.
>
See my above explanation. Flash is erased in blocks, not in words.
Perhaps the above system did not have random read/write flash access ?

There is actually the MSP430 FRAM variant that allows random writes to
persistent FRAM. It can read and write RAM and FRAM with exactly the 
same instruction sequence.

>> Perhaps you can enlighten me which processor has flash, eeprom and ram
>> that all can be acessed by the same code !!
>
> E.g. MSP430 or the R8C.  Or any small ARM Cortex-Mx.
>
>> In my eyes the PIC24 instruction set is rather elegant.
>
> Go look at some more beautiful instruction sets before you say that.
>
Yep, I have restarted my MSP430 FRAM FalshForth.
The MSP430 ISA is also elegant, but the PIC24 ISA has some additional 
features.
- Indexed adressing with pre and post increment and decrement.
- relative call
- Barrel shifter
- DO LOOP in hardware.
- Instruction repetition in hardware.
   repeat #100
   mov [R5++], [--R6]
- Dynamic bit index addressing.
- More MIPS

/Mikael

Back to comp.lang.forth | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-26 10:45 -0700
  Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-26 12:47 -0700
    Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-26 14:07 -0700
  Re: OT (slightly) What is the "best" processor for a new project? oh2aun@gmail.com - 2013-05-26 13:05 -0700
    Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-26 14:09 -0700
      Re: OT (slightly) What is the "best" processor for a new project? oh2aun@gmail.com - 2013-05-26 20:37 -0700
    Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-27 05:21 -0500
      Re: OT (slightly) What is the "best" processor for a new project? oh2aun@gmail.com - 2013-05-27 08:05 -0700
        Re: OT (slightly) What is the "best" processor for a new project? Coos Haak <chforth@hccnet.nl> - 2013-05-27 17:45 +0200
          Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-27 08:58 -0700
          Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-05-27 15:57 +0000
          Re: OT (slightly) What is the "best" processor for a new project? Coos Haak <chforth@hccnet.nl> - 2013-05-27 18:00 +0200
            Re: OT (slightly) What is the "best" processor for a new project? oh2aun@gmail.com - 2013-05-27 09:54 -0700
        Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-27 12:19 -0500
          Re: OT (slightly) What is the "best" processor for a new project? oh2aun@gmail.com - 2013-05-27 10:55 -0700
            Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-27 14:26 -0400
              Re: OT (slightly) What is the "best" processor for a new project? oh2aun@gmail.com - 2013-05-27 12:19 -0700
              Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-27 15:22 -0500
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-27 17:49 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-27 15:00 -0700
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-27 18:08 -0400
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-05-27 12:52 -1000
                Re: OT (slightly) What is the "best" processor for a new project? oh2aun@gmail.com - 2013-05-27 21:36 -0700
                Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-05-28 00:46 +0000
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-28 10:42 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-28 05:11 -0500
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-28 10:40 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-28 10:28 -0500
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-05-28 15:30 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-28 10:48 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Alex McDonald <blog@rivadpm.com> - 2013-05-28 09:30 -0700
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-28 19:02 -0400
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-05-28 16:33 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-28 11:51 -0500
                Re: OT (slightly) What is the 'best' processor for a new project? mhx@iae.nl (Marcel Hendrix) - 2013-05-28 19:45 +0200
                Re: OT (slightly) What is the 'best' processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-05-29 03:41 +0000
                Re: OT (slightly) What is the 'best' processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-28 23:57 -0700
                Re: OT (slightly) What is the 'best' processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 12:37 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-05-29 16:28 +0200
            Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-05-29 16:08 +0200
              Re: OT (slightly) What is the "best" processor for a new project? Mikael Nordman <oh2aun@invalid.com> - 2013-05-29 19:31 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-05-29 19:42 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-29 12:55 -0500
                Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-05-29 18:06 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Mikael Nordman <oh2aun@invalid.com> - 2013-05-29 22:13 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Brad Eckert <hwfwguy@gmail.com> - 2013-05-29 14:35 -0700
                Re: OT (slightly) What is the "best" processor for a new project? hughaguilar96@yahoo.com - 2013-05-29 21:34 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Mikael Nordman <oh2aun@invalid.com> - 2013-05-30 08:31 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-05-30 16:45 +0200
                Re: OT (slightly) What is the "best" processor for a new project? hughaguilar96@yahoo.com - 2013-05-30 17:07 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-05-31 22:01 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-01 23:26 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-03 01:42 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-02 18:26 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-03 21:35 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-04 21:51 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-06 03:45 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-05 22:25 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Brad Eckert <hwfwguy@gmail.com> - 2013-06-06 16:17 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-06 21:25 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-06 20:41 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-07 08:26 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Jecel <jecel@merlintec.com> - 2013-06-07 15:49 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-07 21:43 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Steve <nospam275@gmail.com> - 2013-06-09 01:15 +1000
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-08 22:20 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-09 08:33 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Alex McDonald <blog@rivadpm.com> - 2013-06-09 08:17 -0700
                Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-06-07 15:07 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Mark Wills <markrobertwills@yahoo.co.uk> - 2013-06-07 00:59 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-07 01:11 -0700
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-06-07 09:48 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-07 08:25 -0700
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-06-11 15:33 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-07 08:28 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-08 00:46 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-07 21:58 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-09 00:49 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-08 22:24 -0700
  Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-27 12:08 -0400
    Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-27 09:40 -0700
      Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-27 13:13 -0400
  Re: OT (slightly) What is the "best" processor for a new project? stephenXXX@mpeforth.com (Stephen Pelc) - 2013-05-27 17:18 +0000
  Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-27 22:24 -0700
    Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-27 22:59 -0700
      Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-29 00:01 -0700
        Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-29 00:12 -0700
          Re: OT (slightly) What is the "best" processor for a new project? m.a.m.hendrix@tue.nl - 2013-05-29 01:46 -0700
          Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 12:54 -0400
            Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-29 11:05 -0700
              Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 15:36 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-30 00:07 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-30 00:43 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-30 01:22 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-30 07:49 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-30 07:43 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-30 10:50 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-30 10:18 -0700
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-05-30 08:08 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 00:03 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Elizabeth D Rather <erather@forth.com> - 2013-05-30 21:21 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 11:09 -0700
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-05-31 08:28 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 16:03 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-02 00:05 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Elizabeth D Rather <erather@forth.com> - 2013-06-03 21:21 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Mark Wills <markrobertwills@yahoo.co.uk> - 2013-05-31 00:37 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 01:14 -0700
                Re: OT (slightly) What is the "best" processor for a new project? stephenXXX@mpeforth.com (Stephen Pelc) - 2013-05-31 09:50 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 09:35 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-31 11:47 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 10:09 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-31 12:12 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 10:22 -0700
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-05-31 10:25 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 12:11 -0700
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-06-01 16:12 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 21:43 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-31 06:41 -0500
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-05-31 12:03 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 10:01 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-31 12:06 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-05-31 00:23 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 01:05 -0700
                Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-05-31 11:23 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 11:15 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Gerry Jackson <gerry@jackson9000.fsnet.co.uk> - 2013-05-31 18:37 +0100
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 10:43 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-05-31 23:21 +0200
                Re: OT (slightly) What is the "best" processor for a new project? mhx@iae.nl - 2013-05-31 15:07 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Lars Brinkhoff <lars.spam@nocrew.org> - 2013-06-01 08:55 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 00:41 -0700
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-06-01 13:52 +0000
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-06-03 16:07 +0000
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-06-03 07:56 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-03 11:20 -0700
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-06-04 12:30 +0000
                Re: OT (slightly) What is the 'best' processor for a new project? mhx@iae.nl (Marcel Hendrix) - 2013-06-04 21:47 +0200
                Re: OT (slightly) What is the 'best' processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-05 00:58 +0200
                Re: OT (slightly) What is the 'best' processor for a new project? mhx@iae.nl (Marcel Hendrix) - 2013-06-05 21:09 +0200
                Re: OT (slightly) What is the 'best' processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-06-05 15:50 +0000
                Re: OT (slightly) What is the 'best' processor for a new project? mhx@iae.nl (Marcel Hendrix) - 2013-06-05 22:06 +0200
                Re: OT (slightly) What is the 'best' processor for a new project? Alex McDonald <blog@rivadpm.com> - 2013-06-05 15:26 -0700
                Re: OT (slightly) What is the 'best' processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-06-12 16:41 +0000
                Re: OT (slightly) What is the 'best' processor for a new project? Hugh Aguilar <hughaguilar96@yahoo.com> - 2013-06-12 16:46 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Lars Brinkhoff <lars.spam@nocrew.org> - 2013-06-04 16:06 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-01 02:20 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-01 17:32 +0200
                Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-06-01 19:26 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-02 01:13 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 00:39 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-01 18:05 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-02 00:45 -0700
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-06-02 08:34 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-03 01:57 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-03 19:37 -0700
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-06-03 17:37 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Lars Brinkhoff <lars.spam@nocrew.org> - 2013-06-04 08:03 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Elizabeth D Rather <erather@forth.com> - 2013-06-03 21:22 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-04 01:18 -0700
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-06-04 08:41 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Lars Brinkhoff <lars.spam@nocrew.org> - 2013-06-04 10:46 +0200
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-06-04 05:43 -0500
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-06-04 08:49 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-05 00:48 +0200
                Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-05-31 09:27 +0000
                Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-05-31 11:27 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-31 06:16 -0500
                Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-05-31 11:36 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-31 09:52 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-31 12:10 -0500
                Re: OT (slightly) What is the "best" processor for a new project? "Elizabeth D. Rather" <erather@forth.com> - 2013-05-31 10:30 -1000
                Re: OT (slightly) What is the "best" processor for a new project? Bernd Paysan <bernd.paysan@gmx.de> - 2013-06-01 00:06 +0200
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-06-04 10:07 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 16:01 -0700
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-30 13:20 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-30 09:32 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-30 09:30 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Brad Eckert <hwfwguy@gmail.com> - 2013-05-31 09:38 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-06-01 01:40 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 22:50 -0700
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-30 13:11 -0400
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-30 13:08 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 16:24 -0700
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-06-04 10:49 -0400
    Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-28 10:54 -0400
      Re: OT (slightly) What is the "best" processor for a new project? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2013-05-28 15:27 +0000
        Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-28 09:31 -0700
          Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-28 19:08 -0400
            Re: OT (slightly) What is the "best" processor for a new project? albert@spenarnc.xs4all.nl (Albert van der Horst) - 2013-05-29 03:51 +0000
              Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 13:04 -0400
          Re: OT (slightly) What is the "best" processor for a new project? Pavel Klinkovsky <pavel.klinkovsky@gmail.com> - 2013-05-29 00:12 -0700
            Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 13:05 -0400
        Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-28 09:32 -0700
        Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-28 19:05 -0400
          Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-29 00:16 -0700
            Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-29 00:22 -0700
              Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-29 01:23 -0700
                Re: OT (slightly) What is the "best" processor for a new project? stephenXXX@mpeforth.com (Stephen Pelc) - 2013-05-29 09:35 +0000
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-29 05:37 -0500
                Re: OT (slightly) What is the "best" processor for a new project? Howerd <howerdo@yahoo.co.uk> - 2013-05-29 04:53 -0700
                Re: OT (slightly) What is the "best" processor for a new project? Andrew Haley <andrew29@littlepinkcloud.invalid> - 2013-05-29 08:39 -0500
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 15:25 -0400
                Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-06-01 23:05 -0700
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-06-04 10:57 -0400
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 15:16 -0400
            Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 13:15 -0400
      Re: OT (slightly) What is the "best" processor for a new project? daveyrotten <danw8804@gmail.com> - 2013-05-28 09:21 -0700
        Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-28 19:10 -0400
          Re: OT (slightly) What is the "best" processor for a new project? daveyrotten <danw8804@gmail.com> - 2013-05-28 18:40 -0700
            Re: OT (slightly) What is the "best" processor for a new project? Paul Rubin <no.email@nospam.invalid> - 2013-05-28 19:33 -0700
              Re: OT (slightly) What is the "best" processor for a new project? daveyrotten <danw8804@gmail.com> - 2013-05-29 04:31 -0700
                Re: OT (slightly) What is the "best" processor for a new project? rickman <gnuarm@gmail.com> - 2013-05-29 16:12 -0400
  Re: OT (slightly) What is the "best" processor for a new project? the_gavino_himself <visphatesjava@gmail.com> - 2013-06-11 16:29 -0700

csiph-web