Re: Cutting panels [solved?]

Path	csiph.com!v102.xanadu-bbs.net!xanadu-bbs.net!feeder.erje.net!eu.feeder.erje.net!news-1.dfn.de!news.dfn.de!news.informatik.hu-berlin.de!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From	Joerg <invalid@invalid.invalid>
Newsgroups	sci.electronics.design, comp.arch.embedded
Subject	Re: Cutting panels [solved?]
Date	Tue, 23 Jul 2013 07:38:41 -0700
Organization	Consultant
Lines	29
Message-ID	<b57is1F4ml1U1@mid.individual.net> (permalink)
References	<ksganq$383$1@speranza.aioe.org> <ksgsc7$v8n$1@dont-email.me> <kshfek$1tk$1@speranza.aioe.org> <kshg5c$4a0$1@speranza.aioe.org> <b530r8F5oclU2@mid.individual.net> <ksm141$4k3$2@gonzo.reversiblemaps.ath.cx>
Reply-To	news@analogconsultants.com
Mime-Version	1.0
Content-Type	text/plain; charset=UTF-8
Content-Transfer-Encoding	7bit
X-Trace	individual.net MGrzjsRhJcqrFcnSrJV13gzImDQusAGdLxjJljsIsnC5bP1+cj
Cancel-Lock	sha1:d7xMos4QX8TkL5ghvT/28mKXsKI=
User-Agent	Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070728 Thunderbird/2.0.0.6 Mnenhy/0.7.6.666
In-Reply-To	<ksm141$4k3$2@gonzo.reversiblemaps.ath.cx>
Xref	csiph.com comp.arch.embedded:12667

Cross-posted to 2 groups.

Show key headers only | View raw

Jasen Betts wrote:
> On 2013-07-21, Joerg <invalid@invalid.invalid> wrote:
> 
>> Hey, can you elaborate on that Costco deal? I am always looking for a
>> fast way to make nice-looking front panels. Do they offer some sort of
>> thick-plastic printing?
> 
> photocopiers will print on polycarbonate film, and presumably full-on
> rigid lexan sheet stock if you've got one with a straight paper path.
> 

Mine wouldn't do that. Thin film, ok, but it has to be able to roll
around a tight radius.


> If you print a mirror image and then back it with an opaque layer you
> can face the clear side to the environment and protect the artwork,
> 
> Else print on ordinary paper and run it through an ordinary laminator,
> almost as good (as long as you keep it dry) and less technically
> demanding.
> 

I've done that before. It's ok, but not quite "dog and pony show" quality.

-- 
Regards, Joerg

http://www.analogconsultants.com/

Thread

Cutting panels Don Y <this@isnotme.com> - 2013-07-21 02:47 -0700
  Re: Cutting panels John Fields <jfields@austininstruments.com> - 2013-07-21 08:05 -0500
    Re: Cutting panels Roberto Waltman <usenet@rwaltman.com> - 2013-07-21 10:38 -0400
      Re: Cutting panels "Carl Ijames" <carl.ijames@nonono.verizon.net> - 2013-07-21 12:36 -0400
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:48 -0700
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:29 -0700
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:10 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:23 -0700
          Re: Cutting panels Grant Edwards <invalid@invalid.invalid> - 2013-07-21 21:04 +0000
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 15:07 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:11 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:27 -0700
                Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-23 21:50 -0500
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:24 -0700
                Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:09 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 16:02 -0700
          Re: Cutting panels hamilton <hamilton@nothere.com> - 2013-07-21 16:52 -0600
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:13 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 12:35 -0700
  Re: Cutting panels amdx <nojunk@knology.net> - 2013-07-21 09:54 -0500
    Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:32 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:36 -0700
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:04 -0700
    Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:14 -0700
      Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:26 -0700
        Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-21 14:06 -0700
          Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 16:08 -0700
            Re: Cutting panels [solved?] Rich Webb <webb.ra@example.net> - 2013-07-21 19:42 -0400
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 21:45 -0700
            Re: Cutting panels [solved?] Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-22 07:51 +0000
            Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 05:57 -0700
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 14:46 -0700
                Re: Cutting panels [solved?] Don Lancaster <don@tinaja.com> - 2013-07-23 16:41 -0700
                Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 17:21 -0700
                Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:26 +0000
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 12:11 -0700
                Re: Cutting panels [solved?] Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-25 16:04 -0400
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 13:03 -0700
          Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:40 +0000
            Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-23 07:38 -0700
      Re: Cutting panels [solved?]/summary Don Y <this@isnotme.com> - 2013-07-29 15:18 -0700
  Re: Cutting panels andrews@sdf.lonestar.org - 2013-07-21 12:45 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:17 -0700
  Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-21 19:45 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 17:07 -0700
  Re: Cutting panels Peter Bennett <peterbb@somewhere.invalid> - 2013-07-21 16:57 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 20:58 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 21:02 -0700
      Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 09:20 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 12:15 -0700
          Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 16:17 -0700
            Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 18:52 -0700
              Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:00 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:13 -0700
              Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-23 07:09 -0700
                Re: Cutting panels Charlie E. <edmondson@ieee.org> - 2013-07-23 10:03 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:59 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:54 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-24 13:09 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 15:51 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 09:13 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 11:35 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 12:06 -0700
                Re: Cutting panels Jan Panteltje <panteltje@yahoo.com> - 2013-07-26 19:44 +0000
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 22:21 -0700
                Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-27 08:12 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 13:42 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 18:50 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 22:49 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-27 00:53 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 10:16 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 23:52 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 17:36 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 09:22 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 12:31 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-28 13:48 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 14:20 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 17:39 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 19:38 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 11:15 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 16:30 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 17:38 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 21:45 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-30 12:20 -0700
  Re: Cutting panels Jeff Liebermann <jeffl@cruzio.com> - 2013-07-21 21:38 -0700
  Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 00:39 -0500
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 01:39 -0700
      Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 19:09 -0500
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 20:10 -0700
          Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:07 +0000
  Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-22 18:33 +0100
    Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-22 13:44 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:00 -0700
      Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-23 10:09 +0000
      Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 11:45 +0100
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 13:46 +0100
          Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-23 13:06 +0000
            Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:19 +0100
              Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-24 08:05 +0000
        Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 10:07 -0400
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:26 -0700
    Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:18 +0000
      Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 11:38 -0400
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:32 +0100
          Re: Cutting panels Frank Miles <fpm@u.washington.edu> - 2013-07-23 21:37 +0000
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:16 -0700
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-24 10:37 +0100
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:27 -0700
  Re: Cutting panels Gonadicus <gonadicus@no_spam.com> - 2013-07-23 12:46 +0800
  Re: Cutting panels sms <scharf.steven@geemail.com> - 2013-07-23 04:58 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:13 -0700
  Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:25 +0000
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:42 -0700

csiph-web