Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.arch.embedded > #12593

Re: Cutting panels

From "Carl Ijames" <carl.ijames@nonono.verizon.net>
Newsgroups sci.electronics.design, comp.arch.embedded
Subject Re: Cutting panels
Date 2013-07-21 12:36 -0400
Organization NewsGuy - Unlimited Usenet $23.95
Message-ID <ksh2nf02ed7@news4.newsguy.com> (permalink)
References <ksganq$383$1@speranza.aioe.org> <20nnu8doarr1466ggm9780lc522oi7nalq@4ax.com> <p9snu85ltigm144s0hfc48s3aagqcguftd@4ax.com>

Cross-posted to 2 groups.

Show all headers | View raw

For just one, find someone with a manual mill and have the slots milled. 
Maybe post on rec.crafts.metalworking and tell where you are and maybe 
someone will volunteer.  Or find a machine shop in your area.  Laser 
cutting, punching, or cnc milling will all cost twice as much because of the 
set up and programming involved.  If you want five or ten or more, then that 
gets spread out and doesn't matter much, but for one the overhead is a 
killer.

-----
Regards,
Carl Ijames

"Roberto Waltman"  wrote in message 
news:p9snu85ltigm144s0hfc48s3aagqcguftd@4ax.com...

John Fields wrote:
> Don Y  wrote:

>>I need to fabricate a "patch panel" for a network
>>distribution point.

>If you have a technical sheet metal shop in your area (not the roofing
>kind) that may be the way to go.

Search for "custom panel laser cut metal"
--
Roberto Waltman

[ Please reply to the group,
  return address is invalid ]

Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Cutting panels Don Y <this@isnotme.com> - 2013-07-21 02:47 -0700
  Re: Cutting panels John Fields <jfields@austininstruments.com> - 2013-07-21 08:05 -0500
    Re: Cutting panels Roberto Waltman <usenet@rwaltman.com> - 2013-07-21 10:38 -0400
      Re: Cutting panels "Carl Ijames" <carl.ijames@nonono.verizon.net> - 2013-07-21 12:36 -0400
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:48 -0700
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:29 -0700
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:10 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:23 -0700
          Re: Cutting panels Grant Edwards <invalid@invalid.invalid> - 2013-07-21 21:04 +0000
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 15:07 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:11 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:27 -0700
                Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-23 21:50 -0500
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:24 -0700
                Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:09 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 16:02 -0700
          Re: Cutting panels hamilton <hamilton@nothere.com> - 2013-07-21 16:52 -0600
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:13 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 12:35 -0700
  Re: Cutting panels amdx <nojunk@knology.net> - 2013-07-21 09:54 -0500
    Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:32 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:36 -0700
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:04 -0700
    Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:14 -0700
      Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:26 -0700
        Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-21 14:06 -0700
          Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 16:08 -0700
            Re: Cutting panels [solved?] Rich Webb <webb.ra@example.net> - 2013-07-21 19:42 -0400
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 21:45 -0700
            Re: Cutting panels [solved?] Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-22 07:51 +0000
            Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 05:57 -0700
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 14:46 -0700
                Re: Cutting panels [solved?] Don Lancaster <don@tinaja.com> - 2013-07-23 16:41 -0700
                Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 17:21 -0700
                Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:26 +0000
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 12:11 -0700
                Re: Cutting panels [solved?] Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-25 16:04 -0400
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 13:03 -0700
          Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:40 +0000
            Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-23 07:38 -0700
      Re: Cutting panels [solved?]/summary Don Y <this@isnotme.com> - 2013-07-29 15:18 -0700
  Re: Cutting panels andrews@sdf.lonestar.org - 2013-07-21 12:45 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:17 -0700
  Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-21 19:45 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 17:07 -0700
  Re: Cutting panels Peter Bennett <peterbb@somewhere.invalid> - 2013-07-21 16:57 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 20:58 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 21:02 -0700
      Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 09:20 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 12:15 -0700
          Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 16:17 -0700
            Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 18:52 -0700
              Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:00 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:13 -0700
              Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-23 07:09 -0700
                Re: Cutting panels Charlie E. <edmondson@ieee.org> - 2013-07-23 10:03 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:59 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:54 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-24 13:09 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 15:51 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 09:13 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 11:35 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 12:06 -0700
                Re: Cutting panels Jan Panteltje <panteltje@yahoo.com> - 2013-07-26 19:44 +0000
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 22:21 -0700
                Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-27 08:12 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 13:42 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 18:50 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 22:49 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-27 00:53 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 10:16 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 23:52 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 17:36 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 09:22 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 12:31 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-28 13:48 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 14:20 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 17:39 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 19:38 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 11:15 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 16:30 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 17:38 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 21:45 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-30 12:20 -0700
  Re: Cutting panels Jeff Liebermann <jeffl@cruzio.com> - 2013-07-21 21:38 -0700
  Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 00:39 -0500
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 01:39 -0700
      Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 19:09 -0500
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 20:10 -0700
          Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:07 +0000
  Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-22 18:33 +0100
    Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-22 13:44 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:00 -0700
      Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-23 10:09 +0000
      Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 11:45 +0100
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 13:46 +0100
          Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-23 13:06 +0000
            Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:19 +0100
              Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-24 08:05 +0000
        Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 10:07 -0400
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:26 -0700
    Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:18 +0000
      Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 11:38 -0400
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:32 +0100
          Re: Cutting panels Frank Miles <fpm@u.washington.edu> - 2013-07-23 21:37 +0000
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:16 -0700
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-24 10:37 +0100
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:27 -0700
  Re: Cutting panels Gonadicus <gonadicus@no_spam.com> - 2013-07-23 12:46 +0800
  Re: Cutting panels sms <scharf.steven@geemail.com> - 2013-07-23 04:58 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:13 -0700
  Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:25 +0000
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:42 -0700

csiph-web