Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.arch.embedded > #12681

Re: Cutting panels [solved?]

From Don Lancaster <don@tinaja.com>
Newsgroups sci.electronics.design, comp.arch.embedded
Subject Re: Cutting panels [solved?]
Date 2013-07-23 16:41 -0700
Message-ID <b58iksFbgh5U1@mid.individual.net> (permalink)
References (3 earlier) <kshg5c$4a0$1@speranza.aioe.org> <b530r8F5oclU2@mid.individual.net> <kshpl2$rhk$1@speranza.aioe.org> <nlgru8tfl7r5rfkqtnh3h2lmfi2u2bqmtb@4ax.com> <ksmtkf$6t9$1@speranza.aioe.org>

Cross-posted to 2 groups.

Show all headers | View raw

On 7/23/2013 2:46 PM, Don Y wrote:
> Hi Charlie,
>
> On 7/23/2013 5:57 AM, Charlie E. wrote:
>> On Sun, 21 Jul 2013 16:08:14 -0700, Don Y <this@isnotme.com> wrote:
>>
>>> Dunno.  I was just advocating a *regular* 8x10 glossy photo print
>>> rubber cemented onto a plastic/aluminum panel.  That way, you can
>>> get the "graphics" as a commodity product.
>>>
>>> [Realistically, a glossy photo would probably not fare well.
>>> But, that doesn't mean you can't take advantage of some other
>>> "print from PC" technology to come up with a nice legended overlay.
>>> I.e., separate the cosmetic from the structural requirements...]
>>>
>>> Decades ago, we used to make those stick on "serial number/product
>>> ID" plates on a 1-off basis in the blueprint room.  Some sort of
>>> aluminum(?) with a black coating that could be etched away
>>> (or, maybe it was *deposited*?).  With the sort of technology available
>>> today (photo processes), it should be possible to do at least that
>>> same sort of thing (IIRC, we made a template from clear film and
>>> stick on lettering -- then "exposed" this onto the aluminum product)
>>>
>>> In any case, something like the above solution(s) should be available
>>> for hobbyists trying to make 1-offs without dropping a lot of money
>>> into something with little *functional* value.
>>
>> I have used clear label material to do something like this.  You can
>> get 10 8.5" x 11" sheets for $11 and just print it up in a color laser
>> printer.
>
> Yeah, I was tempted to take a D size (smallest I have) sheet of
> mylar, cut off the title block, etc. and try printing on that!
> (thinking it might be better than this "card stock" I used)
>
> But, I don't know how hot the phaser runs (since it melts wax)
> and the only color laser that I have has a high temperature
> fuser.  In neither case did I want to risk trashing a printer
> just to see if mylar would make a good "medium".
>
> [And, of course, laminating that afterwards subjects it to yet
> another thermal process...]
>
>> They also made a silver set of labels that I used to make serial
>> number panels for.
>

Polyester or mylar can be used in a laser printer.
Vinyl or tyvek can not. Acetate is also a no no.

By as astounding coincidence, we have several dozen miles of clear 
polyester film in stock.

Still trying to build a rewinder to make sanely shippable eBay offers.
We are open to a bid on the entire lot. FOB Thatcher.

-- 
Many thanks,

Don Lancaster                          voice phone: (928)428-4073
Synergetics   3860 West First Street   Box 809 Thatcher, AZ 85552
rss: http://www.tinaja.com/whtnu.xml   email: don@tinaja.com

Please visit my GURU's LAIR web site at http://www.tinaja.com

Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Cutting panels Don Y <this@isnotme.com> - 2013-07-21 02:47 -0700
  Re: Cutting panels John Fields <jfields@austininstruments.com> - 2013-07-21 08:05 -0500
    Re: Cutting panels Roberto Waltman <usenet@rwaltman.com> - 2013-07-21 10:38 -0400
      Re: Cutting panels "Carl Ijames" <carl.ijames@nonono.verizon.net> - 2013-07-21 12:36 -0400
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:48 -0700
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:29 -0700
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:10 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:23 -0700
          Re: Cutting panels Grant Edwards <invalid@invalid.invalid> - 2013-07-21 21:04 +0000
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 15:07 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:11 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:27 -0700
                Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-23 21:50 -0500
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:24 -0700
                Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:09 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 16:02 -0700
          Re: Cutting panels hamilton <hamilton@nothere.com> - 2013-07-21 16:52 -0600
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:13 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 12:35 -0700
  Re: Cutting panels amdx <nojunk@knology.net> - 2013-07-21 09:54 -0500
    Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:32 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:36 -0700
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:04 -0700
    Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:14 -0700
      Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:26 -0700
        Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-21 14:06 -0700
          Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 16:08 -0700
            Re: Cutting panels [solved?] Rich Webb <webb.ra@example.net> - 2013-07-21 19:42 -0400
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 21:45 -0700
            Re: Cutting panels [solved?] Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-22 07:51 +0000
            Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 05:57 -0700
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 14:46 -0700
                Re: Cutting panels [solved?] Don Lancaster <don@tinaja.com> - 2013-07-23 16:41 -0700
                Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 17:21 -0700
                Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:26 +0000
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 12:11 -0700
                Re: Cutting panels [solved?] Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-25 16:04 -0400
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 13:03 -0700
          Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:40 +0000
            Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-23 07:38 -0700
      Re: Cutting panels [solved?]/summary Don Y <this@isnotme.com> - 2013-07-29 15:18 -0700
  Re: Cutting panels andrews@sdf.lonestar.org - 2013-07-21 12:45 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:17 -0700
  Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-21 19:45 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 17:07 -0700
  Re: Cutting panels Peter Bennett <peterbb@somewhere.invalid> - 2013-07-21 16:57 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 20:58 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 21:02 -0700
      Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 09:20 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 12:15 -0700
          Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 16:17 -0700
            Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 18:52 -0700
              Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:00 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:13 -0700
              Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-23 07:09 -0700
                Re: Cutting panels Charlie E. <edmondson@ieee.org> - 2013-07-23 10:03 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:59 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:54 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-24 13:09 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 15:51 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 09:13 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 11:35 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 12:06 -0700
                Re: Cutting panels Jan Panteltje <panteltje@yahoo.com> - 2013-07-26 19:44 +0000
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 22:21 -0700
                Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-27 08:12 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 13:42 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 18:50 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 22:49 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-27 00:53 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 10:16 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 23:52 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 17:36 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 09:22 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 12:31 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-28 13:48 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 14:20 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 17:39 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 19:38 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 11:15 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 16:30 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 17:38 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 21:45 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-30 12:20 -0700
  Re: Cutting panels Jeff Liebermann <jeffl@cruzio.com> - 2013-07-21 21:38 -0700
  Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 00:39 -0500
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 01:39 -0700
      Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 19:09 -0500
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 20:10 -0700
          Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:07 +0000
  Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-22 18:33 +0100
    Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-22 13:44 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:00 -0700
      Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-23 10:09 +0000
      Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 11:45 +0100
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 13:46 +0100
          Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-23 13:06 +0000
            Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:19 +0100
              Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-24 08:05 +0000
        Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 10:07 -0400
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:26 -0700
    Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:18 +0000
      Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 11:38 -0400
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:32 +0100
          Re: Cutting panels Frank Miles <fpm@u.washington.edu> - 2013-07-23 21:37 +0000
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:16 -0700
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-24 10:37 +0100
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:27 -0700
  Re: Cutting panels Gonadicus <gonadicus@no_spam.com> - 2013-07-23 12:46 +0800
  Re: Cutting panels sms <scharf.steven@geemail.com> - 2013-07-23 04:58 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:13 -0700
  Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:25 +0000
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:42 -0700

csiph-web