Re: Cutting panels

From	Joerg <invalid@invalid.invalid>
Newsgroups	sci.electronics.design, comp.arch.embedded
Subject	Re: Cutting panels
Date	2013-07-21 17:11 -0700
Organization	Consultant
Message-ID	<b53blkF7sijU1@mid.individual.net> (permalink)
References	(3 earlier) <ksh2nf02ed7@news4.newsguy.com> <b52hmtF2bciU2@mid.individual.net> <kshic8$lvc$2@reader2.panix.com> <b534ctF6fgtU1@mid.individual.net> <kshr8f$uq4$1@speranza.aioe.org>

Cross-posted to 2 groups.

Show all headers | View raw

Don Y wrote:
> Hi Joerg,
> 
> On 7/21/2013 3:07 PM, Joerg wrote:
>> Grant Edwards wrote:
> 
>>>> It's still less than what most wives spend on shoes, handbags and such
>>>> in a year :-)
>>>
>>> And it's from Harbor Freight, so you know it's a well-designed,
>>> high-quality piece of gear.  :)
>>
>> This was under the assumption of occasional use, not industrial 24/7
>> use. So far Harborfreight stuff has been good to me.
> 
> I think HF is "OK" -- if your expectations are "suitably adjusted".
> <grin>
> 
> A friend has a hammer drill and set of bits from HF that I have used
> several times with great success:
> - holes in the slab to support new walls
> - holes in the wall/fence surrounding the property to support pipes
> - holes through the concrete block to get wires in/out of the house
> 
> [Actually, as of an hour ago, I appear to have inherited this toy!
> Yay!  If it was 100 degrees cooler, I might think it was Christmas!!]
> 
> Damn thing makes these task almost enjoyable!  Really cool to be
> able to drill a 1" hole through concrete without breaking a sweat!
> 
> OTOH, I certainly wouldn't want to depend on it if that was the
> essence of my *livelihood*!
> 

Well, at those prices you could have one or two spares on the truck. But
for serious hammer drilling I've got a Bosch Bulldog. That thing is next
to indestructable.


> Likewise, I need a tile/wet saw and a drywall lift.  I am leary of
> HF as the quality issue *can* have repercussions in each of these
> scenarios.
> 
> E.g., if you have to "fight" the saw to get it to do the job, you
> are more likely to end up with unacceptable results.  (tile tends
> to be located in highly visible locations!)  And, if the drywall
> lift opts to *slip* under load, you end up with a broken back!
> 

I bought an $88 wet tile saw from Home Depot, then a professional-grade
"Mad Dog" blade to replace the cheapo blade that came with it (that's
key), and it served me well for almost 1000 sqft of quite complicated
tile laying. We have a Frank Lloyd Wright style house where hardly any
wall is right-angle.

It was hot, and sometimes I'd just let it run, stand in front of it and
let it rain on me. Poor man's evaporative cooling.

-- 
Regards, Joerg

http://www.analogconsultants.com/

Thread

Cutting panels Don Y <this@isnotme.com> - 2013-07-21 02:47 -0700
  Re: Cutting panels John Fields <jfields@austininstruments.com> - 2013-07-21 08:05 -0500
    Re: Cutting panels Roberto Waltman <usenet@rwaltman.com> - 2013-07-21 10:38 -0400
      Re: Cutting panels "Carl Ijames" <carl.ijames@nonono.verizon.net> - 2013-07-21 12:36 -0400
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:48 -0700
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:29 -0700
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:10 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:23 -0700
          Re: Cutting panels Grant Edwards <invalid@invalid.invalid> - 2013-07-21 21:04 +0000
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 15:07 -0700
              Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:11 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:27 -0700
                Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-23 21:50 -0500
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:24 -0700
                Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:09 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 16:02 -0700
          Re: Cutting panels hamilton <hamilton@nothere.com> - 2013-07-21 16:52 -0600
            Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 17:13 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 12:35 -0700
  Re: Cutting panels amdx <nojunk@knology.net> - 2013-07-21 09:54 -0500
    Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 09:32 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 13:36 -0700
        Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-21 14:04 -0700
    Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:14 -0700
      Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 13:26 -0700
        Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-21 14:06 -0700
          Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-21 16:08 -0700
            Re: Cutting panels [solved?] Rich Webb <webb.ra@example.net> - 2013-07-21 19:42 -0400
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 21:45 -0700
            Re: Cutting panels [solved?] Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-22 07:51 +0000
            Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 05:57 -0700
              Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-23 14:46 -0700
                Re: Cutting panels [solved?] Don Lancaster <don@tinaja.com> - 2013-07-23 16:41 -0700
                Re: Cutting panels [solved?] Charlie E. <edmondson@ieee.org> - 2013-07-23 17:21 -0700
                Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-24 09:26 +0000
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 12:11 -0700
                Re: Cutting panels [solved?] Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-25 16:04 -0400
                Re: Cutting panels [solved?] Don Y <this@isnotme.com> - 2013-07-25 13:03 -0700
          Re: Cutting panels [solved?] Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:40 +0000
            Re: Cutting panels [solved?] Joerg <invalid@invalid.invalid> - 2013-07-23 07:38 -0700
      Re: Cutting panels [solved?]/summary Don Y <this@isnotme.com> - 2013-07-29 15:18 -0700
  Re: Cutting panels andrews@sdf.lonestar.org - 2013-07-21 12:45 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:17 -0700
  Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-21 19:45 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 17:07 -0700
  Re: Cutting panels Peter Bennett <peterbb@somewhere.invalid> - 2013-07-21 16:57 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 20:58 -0700
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-21 21:02 -0700
      Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 09:20 -0700
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 12:15 -0700
          Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-22 16:17 -0700
            Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 18:52 -0700
              Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:00 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:13 -0700
              Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-23 07:09 -0700
                Re: Cutting panels Charlie E. <edmondson@ieee.org> - 2013-07-23 10:03 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:59 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 15:54 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-24 13:09 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-24 15:51 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 09:13 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 11:35 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 12:06 -0700
                Re: Cutting panels Jan Panteltje <panteltje@yahoo.com> - 2013-07-26 19:44 +0000
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 22:21 -0700
                Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-27 08:12 +0000
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 13:42 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-26 18:50 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-26 22:49 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-27 00:53 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 10:16 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-26 23:52 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-27 17:36 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 09:22 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 12:31 -0700
                Re: Cutting panels Paul Rubin <no.email@nospam.invalid> - 2013-07-28 13:48 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 14:20 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 16:35 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-28 17:39 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-28 19:38 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 11:15 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 16:30 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-29 17:38 -0700
                Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-29 21:45 -0700
                Re: Cutting panels Joerg <invalid@invalid.invalid> - 2013-07-30 12:20 -0700
  Re: Cutting panels Jeff Liebermann <jeffl@cruzio.com> - 2013-07-21 21:38 -0700
  Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 00:39 -0500
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 01:39 -0700
      Re: Cutting panels Robert Wessel <robertwessel2@yahoo.com> - 2013-07-22 19:09 -0500
        Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 20:10 -0700
          Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:07 +0000
  Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-22 18:33 +0100
    Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-22 13:44 -0400
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-22 19:00 -0700
      Re: Cutting panels Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-07-23 10:09 +0000
      Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 11:45 +0100
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 13:46 +0100
          Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-23 13:06 +0000
            Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:19 +0100
              Re: Cutting panels 0bama <0B@nocontrast.org> - 2013-07-24 08:05 +0000
        Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 10:07 -0400
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:26 -0700
    Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 14:18 +0000
      Re: Cutting panels Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> - 2013-07-23 11:38 -0400
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-23 22:32 +0100
          Re: Cutting panels Frank Miles <fpm@u.washington.edu> - 2013-07-23 21:37 +0000
      Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:16 -0700
        Re: Cutting panels Theo Markettos <theom+news@chiark.greenend.org.uk> - 2013-07-24 10:37 +0100
          Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-25 01:27 -0700
  Re: Cutting panels Gonadicus <gonadicus@no_spam.com> - 2013-07-23 12:46 +0800
  Re: Cutting panels sms <scharf.steven@geemail.com> - 2013-07-23 04:58 -0700
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 16:13 -0700
  Re: Cutting panels Jasen Betts <jasen@xnet.co.nz> - 2013-07-23 13:25 +0000
    Re: Cutting panels Don Y <this@isnotme.com> - 2013-07-23 21:42 -0700

csiph-web