Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1227975

[PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data

From Roger Quadros <rogerq@ti.com>
Newsgroups linux.kernel
Subject [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data
Date 2015-09-18 17:00 +0200
Message-ID <qa5iP-5JO-41@gated-at.bofh.it> (permalink)
References <qa5iO-5JO-13@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

Copy all the platform data parameters to the driver's local data
structure 'omap_nand_info' and use it in the entire driver. This will
make it easer for device tree migration.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/mtd/nand/omap2.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 267bcdd..c35405c 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -152,14 +152,18 @@ static struct nand_hw_control omap_gpmc_controller = {
 };
 
 struct omap_nand_info {
-	struct omap_nand_platform_data	*pdata;
 	struct mtd_info			mtd;
 	struct nand_chip		nand;
 	struct platform_device		*pdev;
 
 	int				gpmc_cs;
-	unsigned long			phys_base;
+	bool				dev_ready;
+	enum nand_io			xfer_type;
+	int				devsize;
 	enum omap_ecc			ecc_opt;
+	struct device_node		*elm_of_node;
+
+	unsigned long			phys_base;
 	struct completion		comp;
 	struct dma_chan			*dma;
 	int				gpmc_irq;
@@ -1656,7 +1660,7 @@ static bool omap2_nand_ecc_check(struct omap_nand_info *info,
 			"CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
 		return false;
 	}
-	if (ecc_needs_elm && !is_elm_present(info, pdata->elm_of_node)) {
+	if (ecc_needs_elm && !is_elm_present(info, info->elm_of_node)) {
 		dev_err(&info->pdev->dev, "ELM not available\n");
 		return false;
 	}
@@ -1701,6 +1705,11 @@ static int omap_nand_probe(struct platform_device *pdev)
 	info->gpmc_cs		= pdata->cs;
 	info->of_node		= pdata->of_node;
 	info->ecc_opt		= pdata->ecc_opt;
+	info->dev_ready	= pdata->dev_ready;
+	info->xfer_type = pdata->xfer_type;
+	info->devsize = pdata->devsize;
+	info->elm_of_node = pdata->elm_of_node;
+
 	mtd			= &info->mtd;
 	mtd->priv		= &info->nand;
 	mtd->name		= dev_name(&pdev->dev);
@@ -1727,7 +1736,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 	 * chip delay which is slightly more than tR (AC Timing) of the NAND
 	 * device and read status register until you get a failure or success
 	 */
-	if (pdata->dev_ready) {
+	if (info->dev_ready) {
 		nand_chip->dev_ready = omap_dev_ready;
 		nand_chip->chip_delay = 0;
 	} else {
@@ -1741,15 +1750,16 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->options |= NAND_SKIP_BBTSCAN;
 
 	/* scan NAND device connected to chip controller */
-	nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
+	nand_chip->options |= info->devsize & NAND_BUSWIDTH_16;
 	if (nand_scan_ident(mtd, 1, NULL)) {
-		dev_err(&info->pdev->dev, "scan failed, may be bus-width mismatch\n");
+		dev_err(&info->pdev->dev,
+			"scan failed, may be bus-width mismatch\n");
 		err = -ENXIO;
 		goto return_error;
 	}
 
 	/* re-populate low-level callbacks based on xfer modes */
-	switch (pdata->xfer_type) {
+	switch (info->xfer_type) {
 	case NAND_OMAP_PREFETCH_POLLED:
 		nand_chip->read_buf   = omap_read_buf_pref;
 		nand_chip->write_buf  = omap_write_buf_pref;
@@ -1812,7 +1822,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 
 	default:
 		dev_err(&pdev->dev,
-			"xfer_type(%d) not supported!\n", pdata->xfer_type);
+			"xfer_type(%d) not supported!\n", info->xfer_type);
 		err = -EINVAL;
 		goto return_error;
 	}
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes. Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200
  [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200
  [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200

csiph-web