Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1227968
| From | Roger Quadros <rogerq@ti.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin |
| Date | 2015-09-18 17:00 +0200 |
| Message-ID | <qa5iP-5JO-29@gated-at.bofh.it> (permalink) |
| References | <qa5iO-5JO-13@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On these boards NAND ready pin status is avilable over GPMC_WAIT0 pin. For NAND we don't use GPMC wait pin monitoring but get the NAND Ready/Busy# status using GPIOlib. GPMC driver provides the WAIT0 pin status over GPIOlib. Read speed increases from 7869 KiB/ to 8875 KiB/s and write speed was unchanged at 5100 KiB/s. Measured using mtd_speedtest.ko. Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/boot/dts/am335x-chilisom.dtsi | 4 +--- arch/arm/boot/dts/am335x-evm.dts | 4 +--- arch/arm/boot/dts/am335x-igep0033.dtsi | 4 +--- 3 files changed, 3 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index e2b5e22..3c71c5d 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -212,6 +212,7 @@ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&intc>; interrupts = <100>; + ready-gpio = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -230,12 +231,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index bea36e1..c7dfc21 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -523,6 +523,7 @@ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&intc>; interrupts = <100>; + ready-gpio = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <8>; @@ -541,12 +542,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 9252ff1..84d4d50 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -133,6 +133,7 @@ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ interrupt-parent = <&intc>; interrupts = <100>; + ready-gpio = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; gpmc,device-width = <1>; @@ -150,12 +151,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes. Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200 [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200 [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200 [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200 [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200 [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200 [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200 [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200 [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200 [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200 [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200 [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200 [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
csiph-web