Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1227970

[PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node

From Roger Quadros <rogerq@ti.com>
Newsgroups linux.kernel
Subject [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node
Date 2015-09-18 17:00 +0200
Message-ID <qa5iP-5JO-33@gated-at.bofh.it> (permalink)
References <qa5iO-5JO-13@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Make gpmc node gpio+interrupt capable.

Add compatible id, interrupt and wait pin to NAND node.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/dm8168-evm.dts | 7 ++++---
 arch/arm/boot/dts/dm816x.dtsi    | 4 ++++
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 169a855..faa7abe 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -85,8 +85,12 @@
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		linux,mtd-name= "micron,mt29f2g16aadwp";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&intc>;
+		interrupts = <100>;
+		ready-gpio = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
@@ -106,12 +110,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		partition@0 {
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3c99cfa..68fb444 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -182,6 +182,10 @@
 			interrupts = <100>;
 			gpmc,num-cs = <6>;
 			gpmc,num-waitpins = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@48028000 {
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v3 00/27] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 25/27] ARM: dts: am335x: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 15/27] memory: omap-gpmc: Support general purpose input for WAITPINs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 26/27] ARM: dts: dm816x: Fix gpmc and NAND node Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 22/27] ARM: dts: am437x: Fix NAND device nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 10/27] mtd: nand: omap: Copy platform data parameters to omap_nand_info data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 20/27] ARM: dts: dra7: Fix NAND device nodes. Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 19/27] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 13/27] memory: omap-gpmc: Prevent mapping into 1st 16MB Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 18/27] mtd: nand: omap2: Implement NAND ready using gpiolib Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 21/27] ARM: dts: dra7x-evm: Provide NAND ready pin Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 11/27] mtd: nand: omap: Clean up device tree support Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 05/27] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 27/27] ARM: dts: omap3: Fix gpmc and NAND nodes Roger Quadros <rogerq@ti.com> - 2015-09-18 17:00 +0200
  [PATCH v3 14/27] memory: omap-gpmc: Move device tree binding to correct location Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200
  [PATCH v3 17/27] memory: omap-gpmc: Add irqchip support to the gpiochip Roger Quadros <rogerq@ti.com> - 2015-09-18 17:10 +0200
  [PATCH v3 09/27] mtd: nand: omap2: manage NAND interrupts Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 12/27] mtd: nand: omap: Update DT binding documentation Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 07/27] memory: omap-gpmc: Remove NAND IRQ code Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring Roger Quadros <rogerq@ti.com> - 2015-09-18 17:20 +0200
  [PATCH v3 04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 01/27] ARM: OMAP2+: gpmc: Add platform data Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 03/27] memory: omap-gpmc: Introduce GPMC to NAND interface Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200
  [PATCH v3 06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check Roger Quadros <rogerq@ti.com> - 2015-09-18 17:30 +0200

csiph-web