Re: Which scripting for embedded automation?

From	Bernd Paysan <bernd.paysan@gmx.de>
Newsgroups	comp.lang.forth
Subject	Re: Which scripting for embedded automation?
Date	2015-08-16 00:12 +0200
Organization	A noiseless patient Spider
Message-ID	<mqodcu$69f$1@dont-email.me> (permalink)
References	(5 earlier) <86045ab9-f1ca-4ff4-8734-d3eeff02b153@googlegroups.com> <4d83aa2d-3a5e-4db9-bda8-143877d942be@googlegroups.com> <2015Aug14.141330@mips.complang.tuwien.ac.at> <mqlfi9$ukt$1@dont-email.me> <2015Aug15.185758@mips.complang.tuwien.ac.at>

Show all headers | View raw

Anton Ertl wrote:
> Again, initialization becomes a bit of a challenge, as you specify the
> region as const-data: before initializing it.

No, this is just a region where everything that's in there is treated as 
constant.

>> and if you want to enforce the read-only attribute
>>of that section, you can use mprotect - mprotect R/W it when it is active,
>>and R/O when another region is active.
> 
> Active?

You really should try to understand a bit of cross.fs, especially the 
embedded part.  If you compile for an embedded controller, you set up 
regions.  Regions for RAM, and for nonvolatile memory, which is essentially 
constant (write-once, but the image is already loaded, so you can't write 
again).  These memory regions all have a name, and by executing the name 
during compilation, you select the region into which your data goes.

> mprotect() has page granularity, and is not conservative when taking
> away rights, so when you change protection for c-addr u from RW to RO,
> also everything around until the page boundary becomes RO.  If you
> implement a conservative variant of mprotect, a part of the RO region
> will be RO and a part will be RW.  Does not look to me that the
> benefits outweigh the costs.

You would make the entire region r/w when active, and r/o when other regions 
are active.  That way you can detect when your code actually writes to an 
r/o region.  Call it "section", if you like, in cross.fs, it's called 
"memory region" (short: region).

> What might be more like it would be a read-only section, where
> everything up to a point is read-only and stays read-only.  Once you
> have initialized your latest array, you make everything but the part
> in the last page read-only; and if you want to force it, you make the
> last page read-only, too, and set the DP for that section to the start
> of the next page.

I don't really care about what the programmer does to a region when it is 
active, and he's defining stuff in there - this is Forth, you can shoot into 
your foot.  The protection should be for normal application runtime, when 
the read-only section is not active.  Then, it can be protected to detect 
bugs like writing to it.

Several controllers have similar protection schemes with Flash: You need to 
open it for writing, but when you have done so, you can write anywhere (but 
you can just flip 1 bits to 0, not the other way round).  After loading your 
program, you can close the flash down, and then you can't write anything.

-- 
Bernd Paysan
"If you want it done right, you have to do it yourself"
net2o ID: kQusJzA;7*?t=uy@X}1GWr!+0qqp_Cn176t4(dQ*
http://bernd-paysan.de/

Thread

Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-07-24 12:19 -0400
  Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-24 10:15 -0700
    Re: Which scripting for embedded automation? foxaudioresearch@gmail.com - 2015-07-24 10:32 -0700
    Re: Which scripting for embedded automation? "WJ" <w_a_x_man@yahoo.com> - 2015-07-24 23:06 +0000
      Re: Which scripting for embedded automation? Don Y <this@is.not.me.com> - 2015-07-24 17:00 -0700
        Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-07-24 20:52 -0400
          Re: Which scripting for embedded automation? Mark Wills <markwills1970@gmail.com> - 2015-07-25 01:28 -0700
            Re: Which scripting for embedded automation? josv@planet.nl - 2015-07-25 07:15 -0700
            Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-07-25 10:19 -0400
              Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-25 10:26 -0700
              Re: Which scripting for embedded automation? Mark Wills <markwills1970@gmail.com> - 2015-07-27 00:42 -0700
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-26 22:07 -1000
                Re: Which scripting for embedded automation? Mark Wills <markwills1970@gmail.com> - 2015-07-27 01:44 -0700
                Re: Which scripting for embedded automation? foxaudioresearch@gmail.com - 2015-07-27 05:57 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-27 14:02 +0100
                Re: Which scripting for embedded automation? foxaudioresearch@gmail.com - 2015-07-27 08:41 -0700
                Re: Which scripting for embedded automation? Julian Fondren <julian.fondren@gmail.com> - 2015-07-27 08:36 -0700
            Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-07-25 10:20 -0400
              Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-26 04:01 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-26 18:53 +0100
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-26 11:18 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-26 20:25 +0100
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-27 07:36 +0000
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-27 01:12 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-27 10:02 +0000
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-27 13:44 +0100
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-27 15:15 +0000
                Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-27 04:52 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-27 14:01 +0100
                Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-27 06:16 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-27 14:33 +0100
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-27 14:34 +0100
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-27 10:47 -0700
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-27 08:12 -1000
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-27 11:24 -0700
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-27 08:41 -1000
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-27 12:49 -0700
                Re: Which scripting for embedded automation? Julian Fondren <julian.fondren@gmail.com> - 2015-07-27 14:38 -0700
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-27 12:02 -1000
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-07-27 11:16 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-27 20:11 +0100
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-27 13:50 +0000
                Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-27 08:56 -0700
                Re: Which scripting for embedded automation? Doug Hoffman <glidedog@gmail.com> - 2015-08-09 09:32 -0400
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-08-09 16:30 -1000
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-09 22:56 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-10 08:53 +0000
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-08-10 08:28 -1000
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-11 15:17 +0000
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-10 14:14 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-10 16:29 -0700
                Re: Which scripting for embedded automation? Mark Wills <markwills1970@gmail.com> - 2015-08-11 01:44 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-08-11 11:09 +0100
                Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-08-11 11:03 -0400
                Re: Which scripting for embedded automation? Mark Wills <markwills1970@gmail.com> - 2015-08-11 08:08 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-08-11 17:21 +0100
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-11 22:05 -0700
                Re: Which scripting for embedded automation? Mark Wills <markwills1970@gmail.com> - 2015-08-12 05:50 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-08-12 18:02 +0100
                Re: Which scripting for embedded automation? Mark Wills <markwills1970@gmail.com> - 2015-08-12 05:51 -0700
                Re: Which scripting for embedded automation? mhx@iae.nl - 2015-08-12 10:18 -0700
                Re: Which scripting for embedded automation? mhx@iae.nl - 2015-08-13 10:37 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-14 12:13 +0000
                Re: Which scripting for embedded automation? Bernd Paysan <bernd.paysan@gmx.de> - 2015-08-14 21:30 +0200
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-14 13:05 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-15 16:57 +0000
                Re: Which scripting for embedded automation? Bernd Paysan <bernd.paysan@gmx.de> - 2015-08-16 00:12 +0200
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-16 09:44 +0000
                Re: Which scripting for embedded automation? Bernd Paysan <bernd.paysan@gmx.de> - 2015-08-17 00:06 +0200
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-18 09:13 +0000
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-18 09:02 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-08-19 00:02 +0100
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-08-18 14:20 -1000
                Re: Which scripting for embedded automation? Bernd Paysan <bernd.paysan@gmx.de> - 2015-08-19 03:12 +0200
                Re: Which scripting for embedded automation? mhx@iae.nl - 2015-08-14 13:09 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-14 13:43 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-15 17:10 +0000
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-12 21:16 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-12 21:31 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-12 21:39 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-13 13:43 -0700
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-08-13 10:55 +0100
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-14 12:06 -0700
                Re: Which scripting for embedded automation? Alex McDonald <blog@rivadpm.com> - 2015-08-14 18:33 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-15 19:33 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-23 16:59 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-13 15:52 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-10 08:43 +0000
                Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-27 06:04 -0700
                Re: Which scripting for embedded automation? Julian Fondren <ayrnieu@gmail.com> - 2015-07-26 13:49 -0700
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-26 14:56 -1000
                Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-07-26 14:20 -0400
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-26 17:29 -0700
                Re: Which scripting for embedded automation? "WJ" <w_a_x_man@yahoo.com> - 2015-08-10 22:52 +0000
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-26 17:11 -0400
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-26 22:38 +0100
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-26 15:07 -1000
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-26 21:26 -0400
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-26 16:49 -1000
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-27 01:30 -0400
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-26 22:19 -1000
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-27 19:31 -0400
                Re: Which scripting for embedded automation? Julian Fondren <julian.fondren@gmail.com> - 2015-07-27 16:44 -0700
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-27 20:32 -0400
                Re: Which scripting for embedded automation? Bernd Linsel <bl1@gmx.com> - 2015-07-28 18:57 +0200
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-27 22:03 -1000
                Re: Which scripting for embedded automation? stephen@mpeforth.com (Stephen Pelc) - 2015-07-27 09:12 +0000
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-07-27 11:02 -0700
                Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-07-27 14:14 -0400
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-27 20:17 +0100
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-27 19:33 -0400
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-27 22:05 -1000
                Re: Which scripting for embedded automation? "Alex McDonald" <blog@rivadpm.com> - 2015-07-28 12:47 +0100
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-28 23:52 -0400
                Re: Which scripting for embedded automation? awegel@arcor.de (Alexander Wegel) - 2015-07-29 12:24 +0200
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-27 19:32 -0400
                Re: Which scripting for embedded automation? Bernd Linsel <bl1@gmx.com> - 2015-07-28 19:22 +0200
                Re: Which scripting for embedded automation? Walter Banks <walter@bytecraft.com> - 2015-07-28 15:46 -0400
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-28 23:47 -0400
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-29 07:22 +0000
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-29 00:48 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-29 10:15 +0000
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-31 11:34 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-04 09:21 +0000
                Re: Which scripting for embedded automation? Walter Banks <walter@bytecraft.com> - 2015-07-29 13:27 -0400
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-29 18:53 -0400
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-30 12:40 +0000
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-30 22:15 -0400
                Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-07-30 21:51 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-31 10:32 +0000
                Re: Which scripting for embedded automation? David Thompson <dave.thompson2@verizon.net> - 2015-08-16 02:31 -0400
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-16 09:53 +0000
                Re: Which scripting for embedded automation? Bernd Linsel <bl1@gmx.com> - 2015-07-29 17:50 +0200
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-30 13:14 +0000
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-29 10:28 +0000
                Re: Which scripting for embedded automation? Bernd Linsel <bl1@gmx.com> - 2015-07-29 18:24 +0200
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-29 17:09 +0000
                Re: Which scripting for embedded automation? Bernd Linsel <bl1@gmx.com> - 2015-07-30 02:01 +0200
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-07-29 17:58 -0700
                Re: Which scripting for embedded automation? "Rod Pemberton" <boo@fasdfrewar.cdm> - 2015-07-30 21:26 -0400
                Re: Which scripting for embedded automation? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-07-31 00:06 -0700
                Re: Which scripting for embedded automation? Hannu Vuolasaho <vuokkosetae@gmail.com> - 2015-07-31 13:35 +0300
                Re: Which scripting for embedded automation? Mikael Nordman <oh2aun@gmail.com> - 2015-08-01 01:12 -0700
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-07-31 15:05 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-30 12:03 +0000
                Re: Which scripting for embedded automation? Matthias Koch <matthias.koch@hot.uni-hannover.de> - 2015-11-02 16:29 +0100
                Re: Which scripting for embedded automation? Matthias Koch <matthias.koch@hot.uni-hannover.de> - 2015-11-02 16:58 +0100
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-11-02 15:43 +0000
                Re: Which scripting for embedded automation? Matthias Koch <matthias.koch@hot.uni-hannover.de> - 2015-11-02 18:24 +0100
                Re: Which scripting for embedded automation? Bernd Paysan <bernd.paysan@gmx.de> - 2015-11-02 20:09 +0100
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-11-03 12:07 +0000
                Re: Which scripting for embedded automation? Bernd Paysan <bernd.paysan@gmx.de> - 2015-11-03 22:22 +0100
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-11-04 09:47 +0000
                Re: Which scripting for embedded automation? Bernd Paysan <bernd.paysan@gmx.de> - 2015-11-04 14:59 +0100
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-11-04 14:13 +0000
                Re: Which scripting for embedded automation? Albert van der Horst <albert@spenarnc.xs4all.nl> - 2015-11-02 20:29 +0000
                Re: Which scripting for embedded automation? Matthias Koch <matthias.koch@hot.uni-hannover.de> - 2015-11-05 12:02 +0100
                Re: Which scripting for embedded automation? Matthias Koch <matthias.koch@hot.uni-hannover.de> - 2015-11-05 15:57 +0100
                Re: Which scripting for embedded automation? Walter Banks <walter@bytecraft.com> - 2015-07-28 15:32 -0400
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-07-29 16:35 -0700
                Re: Which scripting for embedded automation? Walter Banks <walter@bytecraft.com> - 2015-08-01 22:50 -0400
                Re: Which scripting for embedded automation? hughaguilar96@gmail.com - 2015-08-01 20:06 -0700
                Re: Which scripting for embedded automation? humptydumpty <ouatubi@gmail.com> - 2015-07-26 22:56 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-27 07:32 +0000
                Re: Which scripting for embedded automation? humptydumpty <ouatubi@gmail.com> - 2015-07-27 01:46 -0700
                Re: Which scripting for embedded automation? anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-07-27 07:54 +0000
                Re: Which scripting for embedded automation? humptydumpty <ouatubi@gmail.com> - 2015-07-27 22:42 -0700
                Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-28 02:38 -0700
                Re: Which scripting for embedded automation? humptydumpty <ouatubi@gmail.com> - 2015-07-28 05:28 -0700
                Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-28 05:41 -0700
                Re: Which scripting for embedded automation? humptydumpty <ouatubi@gmail.com> - 2015-07-28 05:49 -0700
                Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-07-28 14:14 -0400
                Re: Which scripting for embedded automation? "Elizabeth D. Rather" <erather@forth.com> - 2015-07-28 07:38 -1000
                Re: Which scripting for embedded automation? glidedog@gmail.com - 2015-07-28 13:37 -0700
      Re: Which scripting for embedded automation? "WJ" <w_a_x_man@yahoo.com> - 2015-11-28 18:06 +0000
    Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-11-29 02:45 -0500
      Re: Which scripting for embedded automation? Paul Rubin <no.email@nospam.invalid> - 2015-11-29 23:02 -0800
        Re: Which scripting for embedded automation? rickman <gnuarm@gmail.com> - 2015-11-30 02:55 -0500

csiph-web