Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1551959
| From | Gregory CLEMENT <gregory.clement@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding |
| Date | 2017-01-05 14:00 +0100 |
| Message-ID | <sWfO9-359-9@gated-at.bofh.it> (permalink) |
| References | <sV0xP-6m-3@gated-at.bofh.it> <sV0xP-6m-15@gated-at.bofh.it> <sVXxT-7HR-23@gated-at.bofh.it> <sVXxT-7HR-21@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Florian,
On mer., janv. 04 2017, Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 01/04/2017 09:23 AM, Gregory CLEMENT wrote:
>> Hi Florian,
>>
>> On lun., janv. 02 2017, Florian Fainelli <f.fainelli@gmail.com> wrote:
>>
>>> Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net:
>>> dsa: Document new binding"). The legacy binding node is kept included, but is
>>> marked disabled.
>>>
>>
>> I tested this patch on mvebu/dt (I needed to reduce the context to apply
>> the patch due to the changes made by Russell King on this file). I also
>> set the status of the old binding to "disable" (instead of "okay").
>
> Yes, that needs fixing, thanks for mentioning that.
>
>>
>> It seems to work with the limited test did:
>> ifconfig eth1 up
>> udhcpc -i lan1
>> iperf -c mylaptop
>>
>> (same for lan4)
>>
>> However is there a way to be sure that the new binding is used?
>
> The best way is probably to make sure that your switch device appears
> parented to the MDIO bus driver under /sys/class/mdio_bus/*mvmdio*.
> Alternatively, if you see a message like:
>
> DSA: switch 0 0 parsed
>
> in your dmesg, that would also be indicative of using the new binding
> and corresponding code.
So it's OK I had this message.
Gregory
>
> Thanks a lot for trying that out!
> --
> Florian
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Florian Fainelli <f.fainelli@gmail.com> - 2017-01-04 18:30 +0100
Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2017-01-04 18:40 +0100
Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Andrew Lunn <andrew@lunn.ch> - 2017-01-04 18:50 +0100
Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2017-01-04 19:00 +0100
Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Gregory CLEMENT <gregory.clement@free-electrons.com> - 2017-01-05 14:00 +0100
csiph-web