Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding

From	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding
Date	2017-01-04 18:40 +0100
Message-ID	<sVXHB-7LF-61@gated-at.bofh.it> (permalink)
References	<sV0xP-6m-3@gated-at.bofh.it> <sV0xP-6m-15@gated-at.bofh.it> <sVXxT-7HR-23@gated-at.bofh.it> <sVXxT-7HR-21@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hi Florian, All,

Florian Fainelli <f.fainelli@gmail.com> writes:

>> However is there a way to be sure that the new binding is used?
>
> The best way is probably to make sure that your switch device appears
> parented to the MDIO bus driver under /sys/class/mdio_bus/*mvmdio*.
> Alternatively, if you see a message like:
>
> DSA: switch 0 0 parsed
>
> in your dmesg, that would also be indicative of using the new binding
> and corresponding code.

That makes me think that we should either remove, or use different
values for the version described in net/dsa/dsa.c:

    char dsa_driver_version[] = "0.1";

Today this is absolutely useless and erroneous.

Thanks,

        Vivien

Thread

Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA  binding Florian Fainelli <f.fainelli@gmail.com> - 2017-01-04 18:30 +0100
  Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2017-01-04 18:40 +0100
    Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA  binding Andrew Lunn <andrew@lunn.ch> - 2017-01-04 18:50 +0100
      Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2017-01-04 19:00 +0100
  Re: [PATCH 3/8] ARM: dts: armada-388-clearfog: Utilize new DSA binding Gregory CLEMENT <gregory.clement@free-electrons.com> - 2017-01-05 14:00 +0100

csiph-web