Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.lang.forth > #39907

Re: Industrial Single Board Forth Computer - recommendations?

Show all headers | View raw

Howerd <howerdo@yahoo.co.uk> writes:
> I think this thread is a classic example of how hard it is to
> communicate on a newsgroup :-)
> What I wanted to achieve was wiring together some really simple
> hardware, write some really simple software to do a really simple job.

I guess I don't understand your expectations then.  There are a ton of 5
volt and 12 volt computer boards out there.  You want a computer that
runs on 28 volts.  So connecting a stepdown converter (little black
module) to an existing board sounds like "wiring together some really
simple hardware" to me.  The software doesn't need to know about it.

I think some aviation stuff also uses 28 volts, so maybe there are
boards intended for use on aircraft that fit your desires.  Anything
having to do with aviation sounds expensive though.

> That is, nobody is catering for the simple problems any more.

The simple problem meaning running a digital board on 28 noisy volts in
a vehicle?  Was that ever considered simple rather than specialized?

>> As Rickman says, maybe the answer is a dc/dc converter in your device.
> Life is too short. The other PCB of the two in a CBC-02 Conveyor Belt
> Computer takes up to 35V DC and drops it down to 12V, so I could use that

I guess I'm not sure if you're talking about the same application.  If
you've already got 12V available in your box, then using it sounds like
the obvious thing.  

> I'm just nostalgic for the days when not all hardware was a mobile
> phone in disquise.

I guess I can understand that.  There are certainly tons of cheap,
simple 5 volt boards that are reasonably Forth-friendly though.

Going a bit fancier, where I worked we used some industrial Linux boards
from these guys:

  http://www.glomationinc.com/products/index.php

Several of them handle automotive temperature ranges and support CAN.
They tend to want 7.5-24 volt power so maybe you could use a zener diode
to drop your 28 volts appropriately.  

MPE also has a board that supports Forth directly and goes up to 24 volts:

   http://mpeforth.com/pb2468.htm

Actually maybe this is of interest:

  https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-328/open-source-hardware

Atmega-328 cpu, industrial temp range, input power up to 30 volts,
anti-noise stuff, seems to have some RS485 code downloadable from the
page.  They have some comparable PIC32-based boards as well, if you need
a bigger cpu.

Back to comp.lang.forth | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Industrial Single Board Forth Computer - recommendations? Howerd <howerdo@yahoo.co.uk> - 2015-06-17 04:35 -0700
  Re: Industrial Single Board Forth Computer - recommendations? Mark Wills <markwills1970@gmail.com> - 2015-06-17 05:21 -0700
  Re: Industrial Single Board Forth Computer - recommendations? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-06-17 08:57 -0700
  Re: Industrial Single Board Forth Computer - recommendations? Jason Damisch <jasondamisch@yahoo.com> - 2015-06-17 10:58 -0700
  Re: Industrial Single Board Forth Computer - recommendations? Jan Coombs <Jan-54 <jenfhaomndgfwutc@murmic.plus.com>> - 2015-06-17 22:39 +0100
    Re: Industrial Single Board Forth Computer - recommendations? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-06-17 23:10 -0700
      Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-18 16:24 -0400
  Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-18 16:17 -0400
    Re: Industrial Single Board Forth Computer - recommendations? Howerd <howerdo@yahoo.co.uk> - 2015-06-20 07:49 -0700
      Re: Industrial Single Board Forth Computer - recommendations? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-06-20 09:36 -0700
        Re: Industrial Single Board Forth Computer - recommendations? Howerd <howerdo@yahoo.co.uk> - 2015-06-20 13:40 -0700
      Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-20 13:00 -0400
        Re: Industrial Single Board Forth Computer - recommendations? Howerd <howerdo@yahoo.co.uk> - 2015-06-20 11:13 -0700
          Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-20 15:04 -0400
        Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-20 20:25 -0700
          Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-20 20:34 -0700
          Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-23 09:40 -0400
            Re: Industrial Single Board Forth Computer - recommendations? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-06-23 08:29 -0700
              Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-23 13:40 -0400
                Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-23 13:42 -0700
                Re: Industrial Single Board Forth Computer - recommendations? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-06-24 07:11 -0700
                Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-24 11:15 -0400
                Re: Industrial Single Board Forth Computer - recommendations? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-06-24 10:16 -0700
                Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-24 17:54 -0400
                Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-24 15:01 -0700
                Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-24 18:38 -0400
                Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-24 16:37 -0700
                Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-24 21:01 -0400
                Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-26 12:58 -0700
      Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-20 12:24 -0700
        Re: Industrial Single Board Forth Computer - recommendations? Howerd <howerdo@yahoo.co.uk> - 2015-06-20 14:03 -0700
          Re: Industrial Single Board Forth Computer - recommendations? Paul Rubin <no.email@nospam.invalid> - 2015-06-20 15:03 -0700
          Re: Industrial Single Board Forth Computer - recommendations? Raimond Dragomir <raimond.dragomir@gmail.com> - 2015-06-21 01:33 -0700
            Re: Industrial Single Board Forth Computer - recommendations? rickman <gnuarm@gmail.com> - 2015-06-23 09:47 -0400
  Re: Industrial Single Board Forth Computer - recommendations? darek.maksimiuk@gmail.com - 2015-06-30 13:52 -0700
    Re: Industrial Single Board Forth Computer - recommendations? visualforth@rocketmail.com - 2015-07-01 10:45 -0700
      Re: Industrial Single Board Forth Computer - recommendations? Howerd <howerdo@yahoo.co.uk> - 2015-07-01 15:01 -0700
        Re: Industrial Single Board Forth Computer - recommendations? visualforth@rocketmail.com - 2015-07-01 18:14 -0700
          Re: Industrial Single Board Forth Computer - recommendations? Mark Wills <markwills1970@gmail.com> - 2015-07-02 00:49 -0700
            Re: Industrial Single Board Forth Computer - recommendations? Howerd <howerdo@yahoo.co.uk> - 2015-07-02 03:02 -0700

csiph-web