Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1477930
| From | John Youn <John.Youn@synopsys.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform |
| Date | 2016-09-07 04:10 +0200 |
| Message-ID | <seAtk-1Sb-5@gated-at.bofh.it> (permalink) |
| References | <sdr8J-2bm-3@gated-at.bofh.it> <sdr8J-2bm-11@gated-at.bofh.it> <segXD-5Xv-9@gated-at.bofh.it> <setLb-5Jg-5@gated-at.bofh.it> <sezQB-1pJ-15@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 9/6/2016 6:19 PM, Ayaka wrote:
>
>
> 從我的 iPad 傳送
>
>> John Youn <John.Youn@synopsys.com> 於 2016年9月7日 上午2:54 寫道:
>>
>>> On 9/5/2016 10:15 PM, Kishon Vijay Abraham I wrote:
>>> Hi,
>>>
>>>> On Sunday 04 September 2016 03:25 AM, Randy Li wrote:
>>>> On the rk3288 USB host-only port (the one that's not the OTG-enabled
>>>> port) the PHY can get into a bad state when a wakeup is asserted (not
>>>> just a wakeup from full system suspend but also a wakeup from
>>>> autosuspend).
>>>>
>>>> We can get the PHY out of its bad state by asserting its "port reset",
>>>> but unfortunately that seems to assert a reset onto the USB bus so it
>>>> could confuse things if we don't actually deenumerate / reenumerate the
>>>> device.
>>>>
>>>> We can also get the PHY out of its bad state by fully resetting it using
>>>> the reset from the CRU (clock reset unit) in chip, which does a more full
>>>> reset. The CRU-based reset appears to actually cause devices on the bus
>>>> to be removed and reinserted, which fixes the problem (albeit in a hacky
>>>> way).
>>>>
>>>> It's unfortunate that we need to do a full re-enumeration of devices at
>>>> wakeup time, but this is better than alternative of letting the bus get
>>>> wedged.
>>>>
>>>> Signed-off-by: Randy Li <ayaka@soulik.info>
>>>> ---
>>>> drivers/usb/dwc2/core_intr.c | 12 ++++++++++++
>>>> 1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
>>>> index d85c5c9..08485b7 100644
>>>> --- a/drivers/usb/dwc2/core_intr.c
>>>> +++ b/drivers/usb/dwc2/core_intr.c
>>>> @@ -345,6 +345,7 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
>>>> static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
>>>> {
>>>> int ret;
>>>> + struct device_node *np = hsotg->dev->of_node;
>>>>
>>>> /* Clear interrupt */
>>>> dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
>>>> @@ -379,6 +380,17 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
>>>> /* Restart the Phy Clock */
>>>> pcgcctl &= ~PCGCTL_STOPPCLK;
>>>> dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
>>>> +
>>>> + /*
>>>> + * It is a quirk in Rockchip RK3288, causing by
>>>> + * a hardware bug. This will propagate out and
>>>> + * eventually we'll re-enumerate the device.
>>>> + * Not great but the best we can do
>>>> + */
>>>> + if (of_device_is_compatible(np, "rockchip,rk3288-usb")
>>>> + && (NULL != hsotg->phy->ops->reset))
>>>> + hsotg->phy->ops->reset(hsotg->phy);
>>>
>>> never call the phy ops directly from the controller driver. It has to be
>>> protected as well.
>>
>> It looks like we should be calling an API function instead, correct?
>>
> Could you give me a example for the wrapper of phy ops?
Check these files:
* include/linux/phy/phy.h
* drivers/phy/phy-core.c
Search for "phy_set_mode".
I'm thinking there should be a "phy_reset" API function which calls
the phy->ops->reset in a similar manner. With the same runtime checks
and stub function if CONFIG_GENERIC_PHY is not enabled.
Regards,
John
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH v7 0/4] the fix for the USB HOST1 at rk3288 platform Randy Li <ayaka@soulik.info> - 2016-09-04 00:00 +0200
[PATCH v7 2/4] phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup Randy Li <ayaka@soulik.info> - 2016-09-04 00:00 +0200
[PATCH v7 1/4] phy: Add reset callback Randy Li <ayaka@soulik.info> - 2016-09-04 00:00 +0200
[PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform Randy Li <ayaka@soulik.info> - 2016-09-04 00:00 +0200
Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2016-09-04 00:40 +0200
RE: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform David Laight <David.Laight@ACULAB.COM> - 2016-09-05 15:50 +0200
Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform Ayaka <ayaka@soulik.info> - 2016-09-06 01:40 +0200
Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform Kishon Vijay Abraham I <kishon@ti.com> - 2016-09-06 07:20 +0200
Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform John Youn <John.Youn@synopsys.com> - 2016-09-06 21:00 +0200
Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform Ayaka <ayaka@soulik.info> - 2016-09-07 03:30 +0200
Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform John Youn <John.Youn@synopsys.com> - 2016-09-07 04:10 +0200
csiph-web