Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1477929
| From | <Ronnie.Kunin@microchip.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | RE: [PATCH 0/2] lan78xx: Remove trailing underscores from macros |
| Date | 2016-09-07 04:10 +0200 |
| Message-ID | <seAtk-1Sb-1@gated-at.bofh.it> (permalink) |
| References | <sexF7-95-3@gated-at.bofh.it> <seAtk-1Sb-3@gated-at.bofh.it> <sezQB-1pJ-13@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Microchip's internal convention is for register (offset) definitions to be capitalized (i.e.: MY_REGISTER). Our convention for bits (position) definitions within a register is to carry as a prefix the name of the register and suffix it with the bit name and adding a trailing underscore (i.e. MY_REGISTER_MY_BIT_). The trailing underscore is what easily lets us distinguish a bit from a register definition when reading code. We have been using this convention for many years and has worked very well for us across all projects (by now hundreds). >Is there anything other than a one-time cost >to apply these? Is the same code used for >other platforms? Yes, a single header file with the definition of registers and bits is shared (either as a standalone file or with its contents pasted into a native environment "carrier" header file) across all drivers (and other non driver software projects as well) for the same device. So a change like this indeed has a high cost for Microchip and we'd rather not do this unless it is an absolutely mandated requirement. Thanks, Ronnie ________________________________________ From: Joe Perches [joe@perches.com] Sent: Tuesday, September 06, 2016 9:18 PM To: Woojung Huh - C21699; netdev@vger.kernel.org; linux-usb@vger.kernel.org Cc: f.fainelli@gmail.com; UNGLinuxDriver; linux-kernel@vger.kernel.org Subject: Re: [PATCH 0/2] lan78xx: Remove trailing underscores from macros On Tue, 2016-09-06 at 23:19 +0000, Woojung.Huh@microchip.com wrote: > > Joe Perches (2): > > lan78xx: Remove locally defined trailing underscores from defines and uses > > microchipphy.h and uses: Remove trailing underscores from defines and > > uses > > > > drivers/net/phy/microchip.c | 4 +- > > drivers/net/usb/lan78xx.c | 368 +++++++-------- > > drivers/net/usb/lan78xx.h | 1068 +++++++++++++++++++++----------------- > > ---- > > include/linux/microchipphy.h | 72 +-- > > 4 files changed, 756 insertions(+), 756 deletions(-) > > > Because there is no specific rule how to name defines, I'm not sure it is worth to change 1000+ lines. > It may be better to set guideline for new submissions. > > Welcome any comments. Generally, more conforming to norms is better. These FOO_ uses are non-conforming. Is there anything other than a one-time cost to apply these? Is the same code used for other platforms?
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 0/2] lan78xx: Remove trailing underscores from macros Joe Perches <joe@perches.com> - 2016-09-07 01:10 +0200
RE: [PATCH 0/2] lan78xx: Remove trailing underscores from macros <Woojung.Huh@microchip.com> - 2016-09-07 01:20 +0200
Re: [PATCH 0/2] lan78xx: Remove trailing underscores from macros Joe Perches <joe@perches.com> - 2016-09-07 03:30 +0200
RE: [PATCH 0/2] lan78xx: Remove trailing underscores from macros <Ronnie.Kunin@microchip.com> - 2016-09-07 04:10 +0200
Re: [PATCH 0/2] lan78xx: Remove trailing underscores from macros Joe Perches <joe@perches.com> - 2016-09-07 04:20 +0200
csiph-web