Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1491163

Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB 60Mhz clock

From Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Newsgroups linux.kernel
Subject Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB 60Mhz clock
Date 2016-09-26 11:00 +0200
Message-ID <slzVv-1EX-29@gated-at.bofh.it> (permalink)
References <sjLHs-74R-19@gated-at.bofh.it> <sjLHs-74R-31@gated-at.bofh.it> <slziN-1rJ-7@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Hi,

On 26/09/16 10:18, Sascha Hauer wrote:
> On Wed, Sep 21, 2016 at 11:07:07AM +0200, Fabien Lahoudere wrote:
>> This binding allow to disable the internal 60Mhz clock for USB host2 or
>> host3.
>>
>> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
>> ---
>>  Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt |  1 +
>>  drivers/usb/chipidea/ci_hdrc_imx.c                     |  2 ++
>>  drivers/usb/chipidea/ci_hdrc_imx.h                     |  1 +
>>  drivers/usb/chipidea/usbmisc_imx.c                     | 13 +++++++++++++
>>  4 files changed, 17 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
>> index 0e03344..f83da66 100644
>> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
>> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
>> @@ -84,6 +84,7 @@ i.mx specific properties
>>  - over-current-active-high: over current signal polarity is high active,
>>    typically over current signal polarity is low active.
>>  - external-vbus-divider: enables off-chip resistor divider for Vbus
>> +- disable-int60ck: disable internal 60MHz clock for usb host2 or host3 on imx53
>
> Why do we need a binding for this? I would assume the driver should know
> whether this clock is in use or not. If it doesn't that's a problem we
> should solve.
>

Yes you are right because we can disable this clock for OTG and with 
ULPI PHY. I think that it will be better to have a dt binding but if it 
is useless I can remove it and disable clock when ULPI mode is enabled.

> Sascha
>

Fabien

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB  60Mhz clock Sascha Hauer <s.hauer@pengutronix.de> - 2016-09-26 10:20 +0200
  Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB  60Mhz clock Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> - 2016-09-26 11:00 +0200

csiph-web