Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1491164

Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB 60Mhz clock

From Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Newsgroups linux.kernel
Subject Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB 60Mhz clock
Date 2016-09-26 11:10 +0200
Message-ID <slA5b-1Xk-3@gated-at.bofh.it> (permalink)
References <sjLHs-74R-19@gated-at.bofh.it> <sjLHs-74R-31@gated-at.bofh.it> <skEDU-80F-21@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Hi,

On 23/09/16 21:47, Rob Herring wrote:
> On Wed, Sep 21, 2016 at 11:07:07AM +0200, Fabien Lahoudere wrote:
>> This binding allow to disable the internal 60Mhz clock for USB host2 or
>> host3.
>>
>> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
>> ---
>>  Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt |  1 +
>>  drivers/usb/chipidea/ci_hdrc_imx.c                     |  2 ++
>>  drivers/usb/chipidea/ci_hdrc_imx.h                     |  1 +
>>  drivers/usb/chipidea/usbmisc_imx.c                     | 13 +++++++++++++
>>  4 files changed, 17 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
>> index 0e03344..f83da66 100644
>> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
>> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
>> @@ -84,6 +84,7 @@ i.mx specific properties
>>  - over-current-active-high: over current signal polarity is high active,
>>    typically over current signal polarity is low active.
>>  - external-vbus-divider: enables off-chip resistor divider for Vbus
>> +- disable-int60ck: disable internal 60MHz clock for usb host2 or host3 on imx53
>
> Doesn't this depend on something else like the type of phy connected? If
> not, when can you do this or not?
>

We can disable it in OTG mode and with ULPI phy and Sascha Hauer think 
we can do it without dt binding for example based on PHY mode. So I will 
remove the binding and just disable clock if ULPI is selected.

> Rob
>

Fabien

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB  60Mhz clock Rob Herring <robh@kernel.org> - 2016-09-23 21:50 +0200
  Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB  60Mhz clock Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> - 2016-09-26 11:10 +0200

csiph-web