Re: Embedded platforms for beginners?

From	Les Cargill <lcargill99@comcast.com>
Newsgroups	comp.arch.embedded
Subject	Re: Embedded platforms for beginners?
Date	2017-09-10 09:03 -0500
Organization	A noiseless patient Spider
Message-ID	<op3gf6$fba$1@dont-email.me> (permalink)
References	<59a8f969$0$2474$b1db1813$814165ff@news.astraweb.com> <01757284-0f4b-4c45-a3f9-be3c34c52c6c@googlegroups.com>

Show all headers | View raw

tarjei99@gmail.com wrote:
> A Raspberry PI 3 should work fine. It is VERY cheap. There is a
> thriving Maker community associated with it. Some use it with
> Arduino.
>
> It is the size of a pack of playing cards.
>
> It is powered by Micro USB and has the following :
>
> + Broadcom BCM2837 Arm7 Quad Core Processor powered SBC running at
> 900MHz In 64 bit mode it becomes a Arm8 Can be overclocked pretty
> easily + 1GB RAM + 40pin extended GPIO + 4 normal USB 2 + 1 Ethernet
>  + built-in wifi

... and you can bridge the WiFi and Ethernet...

 > + CSI camera port for connecting the RPI camera +
> DSI display port for connecting the RPI touch screen display + HDMI
> + Micro SD card as disk.
>
> Operating systems :  Primarily Raspbian, other Linuxes, FreeBSD,
> HardenedBSD, RiscOS and Windows 10 IOT core.
>
> It is both a normal computer and have an I/O expansion port for
> whatever you try to make.
>

The 4 USB ports mean you can add Ardiunos for hard realtime
capability, or for protocol conversion. There is a small
eternity of other USB peripherals.

The Arduino is generally seen as a serial port, so you might be
constrained to 115,200 bits/sec per.

> It is difficult to see a more ideal start system for somebody who
> want to start with embedded systems.
>
> Adafruit seems to like it a lot. www.adafruit.com/raspberrypi‎
>
> https://www.raspberrypi.org/
>

-- 
Les Cargill

Back to comp.arch.embedded | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-01 14:07 +0800
  Re: Embedded platforms for beginners? Jack <jack4747@gmail.com> - 2017-08-31 23:22 -0700
  Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-01 04:10 -0400
  Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-01 21:49 +1000
    Re: Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-02 11:57 +0800
      Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-02 18:25 +1000
        Re: Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-03 15:37 +0800
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 17:54 +1000
          Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 13:49 -0400
    Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-02 11:41 -0400
      Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 09:44 +1000
        Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-02 20:39 -0400
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 11:16 +1000
        Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-02 18:21 -0700
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 14:26 +1000
            Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 02:14 -0400
              Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 17:52 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 13:50 -0400
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:20 -0700
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-05 22:06 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:21 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-05 22:42 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 14:26 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-06 01:20 -0400
                Re: Embedded platforms for beginners? George Neuner <gneuner2@comcast.net> - 2017-09-03 15:58 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 08:00 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-03 19:13 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 09:58 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-03 20:16 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:13 +1000
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:24 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:55 +1000
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-05 14:15 +0200
                Re: Embedded platforms for beginners? George Neuner <gneuner2@comcast.net> - 2017-09-05 12:35 -0400
                Re: Embedded platforms for beginners? Rob Gaddi <rgaddi@highlandtechnology.invalid> - 2017-09-05 10:02 -0700
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-05 18:13 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-06 10:24 +0200
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 17:10 -0700
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-06 09:57 +0200
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 16:57 -0700
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 16:54 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:31 +1000
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 19:42 -0700
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-05 10:16 +0200
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-05 16:56 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-04 10:46 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-05 17:09 -0400
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 19:35 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:40 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-06 00:42 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-06 08:55 +0100
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-06 08:45 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-07 20:23 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 08:42 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-08 12:07 +0200
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 11:40 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-08 13:24 +0200
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 13:36 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-09 13:16 -0400
                Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-10 08:53 -0500
                Re: Embedded platforms for beginners? Dimiter_Popoff <dp@tgi-sci.com> - 2017-09-10 20:18 +0300
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-11 21:24 -0400
                Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-15 22:22 -0500
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-18 11:26 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-18 18:26 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-19 14:27 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-18 18:24 +0100
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:30 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:51 +1000
            Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:04 -0700
      Re: Embedded platforms for beginners? kristoff <kristoff@skypro.be> - 2017-09-05 17:56 +0200
        Re: Embedded platforms for beginners? Luke A. Guest <laguest@archeia.com> - 2017-09-10 17:10 +0100
  Re: Embedded platforms for beginners? tarjei99@gmail.com - 2017-09-10 05:49 -0700
    Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-10 09:03 -0500

csiph-web