Re: Embedded platforms for beginners?

From	Paul Rubin <no.email@nospam.invalid>
Newsgroups	comp.arch.embedded
Subject	Re: Embedded platforms for beginners?
Date	2017-09-03 22:30 -0700
Organization	A noiseless patient Spider
Message-ID	<87k21fm3og.fsf@nightsong.com> (permalink)
References	(4 earlier) <87a82co9uz.fsf@nightsong.com> <XvLqB.28929$WI2.23299@fx38.iad> <oog6bc$39j$2@dont-email.me> <gxOqB.99287$lI2.58205@fx39.iad> <drkoqcd6fljmafbgsv2s5q9i7teo116qei@4ax.com>

Show all headers | View raw

George Neuner <gneuner2@comcast.net> writes:
> My position is that GC has no place in a small system.  OTOH, if
> you're talking about a complex system with 32-bit controller and 100s
> of KB (or more) of RAM ...

MicroPython works with some contortions on the BBC Micro:bit which has
16k of ram, and much more nicely on the recent Adafruit SAMD21 boards
which have 32k of ram.  I don't know how much Luanode uses.

Camelforth/4e4th (non-gc) runs ok on the MSP430G2553 which has 16k of
flash and 512 bytes of ram.  That might be a good way to start, or maybe
Amforth on the AVR-based Arduinos.  Who really cares about these any
more though, except for legacy products?  Everything is 32 bit now.

I bought an Adafruit Gemma M0 board last week and had hoped to try it
out this weekend, but have been distracted by other things.  Real soon
now though.  If it's what it's cracked up to be, it basically puts
the nail into the Arduino.

Thread

Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-01 14:07 +0800
  Re: Embedded platforms for beginners? Jack <jack4747@gmail.com> - 2017-08-31 23:22 -0700
  Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-01 04:10 -0400
  Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-01 21:49 +1000
    Re: Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-02 11:57 +0800
      Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-02 18:25 +1000
        Re: Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-03 15:37 +0800
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 17:54 +1000
          Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 13:49 -0400
    Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-02 11:41 -0400
      Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 09:44 +1000
        Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-02 20:39 -0400
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 11:16 +1000
        Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-02 18:21 -0700
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 14:26 +1000
            Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 02:14 -0400
              Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 17:52 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 13:50 -0400
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:20 -0700
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-05 22:06 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:21 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-05 22:42 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 14:26 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-06 01:20 -0400
                Re: Embedded platforms for beginners? George Neuner <gneuner2@comcast.net> - 2017-09-03 15:58 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 08:00 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-03 19:13 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 09:58 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-03 20:16 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:13 +1000
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:24 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:55 +1000
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-05 14:15 +0200
                Re: Embedded platforms for beginners? George Neuner <gneuner2@comcast.net> - 2017-09-05 12:35 -0400
                Re: Embedded platforms for beginners? Rob Gaddi <rgaddi@highlandtechnology.invalid> - 2017-09-05 10:02 -0700
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-05 18:13 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-06 10:24 +0200
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 17:10 -0700
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-06 09:57 +0200
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 16:57 -0700
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 16:54 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:31 +1000
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 19:42 -0700
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-05 10:16 +0200
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-05 16:56 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-04 10:46 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-05 17:09 -0400
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 19:35 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:40 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-06 00:42 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-06 08:55 +0100
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-06 08:45 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-07 20:23 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 08:42 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-08 12:07 +0200
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 11:40 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-08 13:24 +0200
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 13:36 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-09 13:16 -0400
                Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-10 08:53 -0500
                Re: Embedded platforms for beginners? Dimiter_Popoff <dp@tgi-sci.com> - 2017-09-10 20:18 +0300
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-11 21:24 -0400
                Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-15 22:22 -0500
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-18 11:26 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-18 18:26 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-19 14:27 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-18 18:24 +0100
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:30 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:51 +1000
            Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:04 -0700
      Re: Embedded platforms for beginners? kristoff <kristoff@skypro.be> - 2017-09-05 17:56 +0200
        Re: Embedded platforms for beginners? Luke A. Guest <laguest@archeia.com> - 2017-09-10 17:10 +0100
  Re: Embedded platforms for beginners? tarjei99@gmail.com - 2017-09-10 05:49 -0700
    Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-10 09:03 -0500

csiph-web