Re: Embedded platforms for beginners?

From	Paul Rubin <no.email@nospam.invalid>
Newsgroups	comp.arch.embedded
Subject	Re: Embedded platforms for beginners?
Date	2017-09-05 16:54 -0700
Organization	A noiseless patient Spider
Message-ID	<874lsgn1l7.fsf@nightsong.com> (permalink)
References	(11 earlier) <lG0rB.65702$EZ2.14489@fx22.iad> <v4OdnVKvv-PMBjHEnZ2dnUU7-LOdnZ2d@supernews.com> <2i5rB.35182$OC1.2645@fx06.iad> <87o9qrm3xw.fsf@nightsong.com> <CV5rB.34451$WI2.28011@fx38.iad>

Show all headers | View raw

Clifford Heath <no.spam@please.net> writes:
> No, [GC is] *still* not the way to get the best from most embedded
> hardware. It's an acceptable compromise, some of the time, is all that
> can really be said.

Sure, that's absolutely true, for big hardware as well as embedded, but
we live in an era where "getting the best from the hardware" isn't an
issue for most projects these days.  It's been like that on desktops for
decades, and it's now getting like that even for small embedded stuff.

Right now I'm building what amounts to a modified LED blinky.  In the
old days that would have been a transistor circuit or a 555 timer.  Or
it could straightforwardly be done with the smallest of PIC 10Fxxxx's or
whatever.  But instead I'm using the Gemma M0 board that I mentioned, a
32-bit ARM cpu programmed in Python, just because it's cheap enough and
it seems like the easiest approach.

Sure if I was making millions of them I'd have to go down the cost
reduction road, but I'm making just a handful.  I'm sure the same is
true of most things built by contributors here.  Being able to get down
to the machine level used to be the starting point of embedded
programming, but now I'd consider it further down the path.

Thread

Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-01 14:07 +0800
  Re: Embedded platforms for beginners? Jack <jack4747@gmail.com> - 2017-08-31 23:22 -0700
  Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-01 04:10 -0400
  Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-01 21:49 +1000
    Re: Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-02 11:57 +0800
      Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-02 18:25 +1000
        Re: Embedded platforms for beginners? Elof Huang <elof.huang@runbox.com> - 2017-09-03 15:37 +0800
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 17:54 +1000
          Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 13:49 -0400
    Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-02 11:41 -0400
      Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 09:44 +1000
        Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-02 20:39 -0400
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 11:16 +1000
        Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-02 18:21 -0700
          Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 14:26 +1000
            Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 02:14 -0400
              Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-03 17:52 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-03 13:50 -0400
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:20 -0700
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-05 22:06 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:21 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-05 22:42 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 14:26 +1000
                Re: Embedded platforms for beginners? rickman <gnuarm@gmail.com> - 2017-09-06 01:20 -0400
                Re: Embedded platforms for beginners? George Neuner <gneuner2@comcast.net> - 2017-09-03 15:58 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 08:00 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-03 19:13 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 09:58 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-03 20:16 -0400
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:13 +1000
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:24 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:55 +1000
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-05 14:15 +0200
                Re: Embedded platforms for beginners? George Neuner <gneuner2@comcast.net> - 2017-09-05 12:35 -0400
                Re: Embedded platforms for beginners? Rob Gaddi <rgaddi@highlandtechnology.invalid> - 2017-09-05 10:02 -0700
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-05 18:13 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-06 10:24 +0200
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 17:10 -0700
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-06 09:57 +0200
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 16:57 -0700
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 16:54 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:31 +1000
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 19:42 -0700
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-05 10:16 +0200
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-05 16:56 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-04 10:46 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-05 17:09 -0400
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-05 19:35 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-06 12:40 +1000
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-06 00:42 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-06 08:55 +0100
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-06 08:45 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-07 20:23 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 08:42 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-08 12:07 +0200
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 11:40 +0100
                Re: Embedded platforms for beginners? David Brown <david.brown@hesbynett.no> - 2017-09-08 13:24 +0200
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-08 13:36 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-09 13:16 -0400
                Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-10 08:53 -0500
                Re: Embedded platforms for beginners? Dimiter_Popoff <dp@tgi-sci.com> - 2017-09-10 20:18 +0300
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-11 21:24 -0400
                Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-15 22:22 -0500
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-18 11:26 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-18 18:26 +0100
                Re: Embedded platforms for beginners? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-09-19 14:27 -0400
                Re: Embedded platforms for beginners? Tom Gardner <spamjunk@blueyonder.co.uk> - 2017-09-18 18:24 +0100
                Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:30 -0700
                Re: Embedded platforms for beginners? Clifford Heath <no.spam@please.net> - 2017-09-04 15:51 +1000
            Re: Embedded platforms for beginners? Paul Rubin <no.email@nospam.invalid> - 2017-09-03 22:04 -0700
      Re: Embedded platforms for beginners? kristoff <kristoff@skypro.be> - 2017-09-05 17:56 +0200
        Re: Embedded platforms for beginners? Luke A. Guest <laguest@archeia.com> - 2017-09-10 17:10 +0100
  Re: Embedded platforms for beginners? tarjei99@gmail.com - 2017-09-10 05:49 -0700
    Re: Embedded platforms for beginners? Les Cargill <lcargill99@comcast.com> - 2017-09-10 09:03 -0500

csiph-web