Re: Forth CPUs with NO Interrupts

From	rickman <gnuarm@gmail.com>
Newsgroups	comp.lang.forth
Subject	Re: Forth CPUs with NO Interrupts
Date	2015-09-03 12:59 -0400
Organization	A noiseless patient Spider
Message-ID	<ms9u6c$v8d$1@dont-email.me> (permalink)
References	(12 earlier) <557e316e-d1eb-4dc9-bc34-243ddd7c1730@googlegroups.com> <ms7s40$5fk$2@dont-email.me> <710fa208-7afe-4810-8121-9da26a0f3232@googlegroups.com> <ms84v8$vod$3@dont-email.me> <45f7f642-c80b-408d-8441-d90654639595@googlegroups.com>

Show all headers | View raw

On 9/3/2015 1:34 AM, Mux wrote:
> On Wednesday, September 2, 2015 at 5:43:03 PM UTC-7, rickman wrote:
>> On 9/2/2015 7:20 PM, Mux wrote:
>>>> And you only get them on Xilinx parts.  Xilinx <> FPGA
>>>>
>>>> I don't optimize until I know I have an issue that requires
>>>> optimization.  Maybe the optimization is minimizing LUT usage?
>>>
>>> Could be. I'm using altera and instantiating them individually.
>>> Either way, performance analysis comes out a few 10's of mhz
>>> higher. On Altera devices, it synthesizes to 1 LE/bit.
>>
>> Something is wrong.  Altera parts don't have shift registers built
>> into their LEs.  At least they didn't and I am pretty sure Xilinx
>> has a patent on it, good for a few more years I expect... maybe
>> not.  Which part are you using?  One of the latest and greatest?
>> Or are you saying 1 LE/bit/sr depth?
>>
>> --
>>
>> Rick
>
> It's not built-in. I basically have an array of registers that does
> this for a pop:
>
> T <= reg[0]; reg[0] <= reg[1]; reg[1] <= reg[2]; .... reg[n] <=
> 16'd0;
>
> and the code below for a push. I'm actually using a loop construct so
> I don't have to write it out each time, but still..
>
> T <= alu_result; reg[0] <= T; reg[1] <= reg[0]; ....
>
> All that this does is place a single 2-to-1 mux between each register
> based on the direction of shift, so it should (all) pretty much go
> down to routing. A 16x16 stack translates to 256 LE's on as low as an
> ancient EPC10k10 FPGA.

Yes and very inefficient in terms of logic utilization.  A high price to 
pay for performance which may or may not pan out.  I find the block RAMs 
are not in any of the critical timing paths of any CPU I've designed.

-- 

Rick

Thread

Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 00:53 -0400
  Re: Forth CPUs with NO Interrupts anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-26 08:51 +0000
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 08:50 -0400
    Re: Forth CPUs with NO Interrupts "Elizabeth D. Rather" <erather@forth.com> - 2015-08-26 07:23 -1000
  Re: Forth CPUs with NO Interrupts Mark Wills <markwills1970@gmail.com> - 2015-08-26 04:33 -0700
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 08:46 -0400
    Re: Forth CPUs with NO Interrupts mhx@iae.nl - 2015-08-26 11:17 -0700
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-08-26 12:50 -0700
      Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 18:28 -0400
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-08-27 23:44 -0700
      Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-08-28 18:28 -0700
  Re: Forth CPUs with NO Interrupts Walter Banks <walter@bytecraft.com> - 2015-08-26 11:41 -0400
  Re: Forth CPUs with NO Interrupts Syd Rumpo <usenet@nononono.co.uk> - 2015-08-26 17:12 +0100
    Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-08-26 09:48 -0700
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 18:39 -0400
  Re: Forth CPUs with NO Interrupts "Ala'a Alawi" <amalawi@gmail.com> - 2015-08-27 08:37 -0700
  Re: Forth CPUs with NO Interrupts pbjtech@gmail.com - 2015-08-30 19:01 -0700
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-30 22:45 -0400
      Re: Forth CPUs with NO Interrupts Reinhardt Behm <rbehm@hushmail.com> - 2015-08-31 11:09 +0800
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-08-30 20:06 -0700
      Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-30 23:20 -0400
        Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-02 14:14 -0700
          Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 18:02 -0400
      Re: Forth CPUs with NO Interrupts Bob <bob@none.com> - 2015-08-31 20:49 -0400
        Re: Forth CPUs with NO Interrupts Mark Wills <markwills1970@gmail.com> - 2015-09-01 01:39 -0700
          Re: Forth CPUs with NO Interrupts dunno <dunno@dunno.dunno> - 2015-09-01 17:58 +0000
          Re: Forth CPUs with NO Interrupts Bob <bob@none.com> - 2015-09-01 18:48 -0400
            Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-01 16:32 -0700
            Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-02 01:38 +0200
              Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-01 22:09 -0400
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-02 14:12 +0200
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 12:40 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 10:40 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 16:57 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 14:55 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 18:11 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 16:20 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 20:42 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 22:34 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-03 12:59 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-03 15:54 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-03 19:54 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-03 21:13 -0700
                Re: Forth CPUs with NO Interrupts Jan Coombs <Jan-54 <jenfhaomndgfwutc@murmic.plus.com>> - 2015-09-04 09:48 +0100
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 08:49 -0700
                Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-04 11:15 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 14:32 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 11:36 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 17:46 -0400
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 11:47 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 09:20 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 12:52 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 10:20 -0700
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-02 23:35 +0200
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 18:09 -0400
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-03 02:07 +0200
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 20:49 -0400
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-03 14:30 +0200
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-02 14:23 -0700

csiph-web