Re: Forth CPUs with NO Interrupts

From	rickman <gnuarm@gmail.com>
Newsgroups	comp.lang.forth
Subject	Re: Forth CPUs with NO Interrupts
Date	2015-09-02 16:57 -0400
Organization	A noiseless patient Spider
Message-ID	<ms7nos$hpi$1@dont-email.me> (permalink)
References	(6 earlier) <ms5cph$dda$1@dont-email.me> <ms5lks$v7g$1@dont-email.me> <ms6p0k$f5v$1@dont-email.me> <ms78mf$hp1$1@dont-email.me> <2b10f494-9649-4a0a-8520-5d4a1187ac16@googlegroups.com>

Show all headers | View raw

On 9/2/2015 1:40 PM, Mux wrote:
> With the exception that blockram's are 'free' and don't take up
> resources, I use 16x16bit deep bi-directional shift-registers.
> They're generally cheaper and faster than using blockram but take, of
> course, more resources. All depends on what you need. With that, I
> only need two control bits: enable and direction. Additionally, all
> of these work in parallel so an Add basically does all of the logic
> in a single clock. No fiddling with stack pointers, adders and what
> not..

I am speculating, but if you are using the Xilinx SRL (if that is the 
right name), thy are implemented as the LUT latches with counters to 
work as a shift register.  They don't have full data paths to shift data 
between the latches and using counters saves power too.  If you are 
implementing a proper shift register using FPGA registers, you are using 
a 2 to 1 mux on every bit of every register to get bi-directionality.

BTW, blockrams are far from "free".  They are just a different color of 
money.

-- 

Rick

Thread

Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 00:53 -0400
  Re: Forth CPUs with NO Interrupts anton@mips.complang.tuwien.ac.at (Anton Ertl) - 2015-08-26 08:51 +0000
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 08:50 -0400
    Re: Forth CPUs with NO Interrupts "Elizabeth D. Rather" <erather@forth.com> - 2015-08-26 07:23 -1000
  Re: Forth CPUs with NO Interrupts Mark Wills <markwills1970@gmail.com> - 2015-08-26 04:33 -0700
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 08:46 -0400
    Re: Forth CPUs with NO Interrupts mhx@iae.nl - 2015-08-26 11:17 -0700
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-08-26 12:50 -0700
      Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 18:28 -0400
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-08-27 23:44 -0700
      Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-08-28 18:28 -0700
  Re: Forth CPUs with NO Interrupts Walter Banks <walter@bytecraft.com> - 2015-08-26 11:41 -0400
  Re: Forth CPUs with NO Interrupts Syd Rumpo <usenet@nononono.co.uk> - 2015-08-26 17:12 +0100
    Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-08-26 09:48 -0700
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-26 18:39 -0400
  Re: Forth CPUs with NO Interrupts "Ala'a Alawi" <amalawi@gmail.com> - 2015-08-27 08:37 -0700
  Re: Forth CPUs with NO Interrupts pbjtech@gmail.com - 2015-08-30 19:01 -0700
    Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-30 22:45 -0400
      Re: Forth CPUs with NO Interrupts Reinhardt Behm <rbehm@hushmail.com> - 2015-08-31 11:09 +0800
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-08-30 20:06 -0700
      Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-08-30 23:20 -0400
        Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-02 14:14 -0700
          Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 18:02 -0400
      Re: Forth CPUs with NO Interrupts Bob <bob@none.com> - 2015-08-31 20:49 -0400
        Re: Forth CPUs with NO Interrupts Mark Wills <markwills1970@gmail.com> - 2015-09-01 01:39 -0700
          Re: Forth CPUs with NO Interrupts dunno <dunno@dunno.dunno> - 2015-09-01 17:58 +0000
          Re: Forth CPUs with NO Interrupts Bob <bob@none.com> - 2015-09-01 18:48 -0400
            Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-01 16:32 -0700
            Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-02 01:38 +0200
              Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-01 22:09 -0400
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-02 14:12 +0200
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 12:40 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 10:40 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 16:57 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 14:55 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 18:11 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 16:20 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 20:42 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-02 22:34 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-03 12:59 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-03 15:54 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-03 19:54 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-03 21:13 -0700
                Re: Forth CPUs with NO Interrupts Jan Coombs <Jan-54 <jenfhaomndgfwutc@murmic.plus.com>> - 2015-09-04 09:48 +0100
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 08:49 -0700
                Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-04 11:15 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 14:32 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 11:36 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 17:46 -0400
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 11:47 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 09:20 -0700
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-04 12:52 -0400
                Re: Forth CPUs with NO Interrupts Mux <Yvo.Zoer@gmail.com> - 2015-09-04 10:20 -0700
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-02 23:35 +0200
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 18:09 -0400
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-03 02:07 +0200
                Re: Forth CPUs with NO Interrupts rickman <gnuarm@gmail.com> - 2015-09-02 20:49 -0400
                Re: Forth CPUs with NO Interrupts Bernd Paysan <bernd.paysan@gmx.de> - 2015-09-03 14:30 +0200
    Re: Forth CPUs with NO Interrupts hughaguilar96@gmail.com - 2015-09-02 14:23 -0700

csiph-web