Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.arch.embedded > #13404

Re: AREF bypass capacitance on ATMega2560?

From rickman <gnuarm@gmail.com>
Newsgroups sci.electronics.design, comp.arch.embedded
Subject Re: AREF bypass capacitance on ATMega2560?
Date 2013-09-08 07:29 -0400
Organization A noiseless patient Spider
Message-ID <l0j18v$ph7$1@dont-email.me> (permalink)
References (8 earlier) <87y579yr74.fsf@devereux.me.uk> <l0fbin$v4p$1@dont-email.me> <87ppsjzql6.fsf@devereux.me.uk> <l0icti$1vc$1@dont-email.me> <87li37yytr.fsf@devereux.me.uk>

Cross-posted to 2 groups.

Show all headers | View raw

On 9/8/2013 2:04 PM, John Devereux wrote:
> rickman<gnuarm@gmail.com>  writes:
>
>> On 9/8/2013 4:04 AM, John Devereux wrote:
>>> rickman<gnuarm@gmail.com>   writes:
>>>
>>>> On 9/7/2013 4:24 AM, John Devereux wrote:
>>>>> rickman<gnuarm@gmail.com>    writes:
>>>>>
>>>>>> If your FPGA designs are expensive or power hungry, then you are doing
>>>>>> things you can't do in an MCU or you are not using FPGAs properly.
>>>>>> They don't need to use any more power than an MCU and in many cases
>>>>>> less. They certainly don't need to be significantly more expensive
>>>>>> unless you consider every dollar in your designs.  At the very low end
>>>>>> MCUs can be under $1 and still have reasonable performance.  For $1
>>>>>> you can't get much in the way of programmable logic.  For $3 however,
>>>>>> you can get a chip large enough for a CPU (with math) and room for
>>>>>> your special logic.
>>>>>
>>>>> I've never used an FPGA, microcontrollers have increased in speed faster
>>>>> than my needs so far. So I can usually bitbang everything or use a
>>>>> peripheral. I used PLDs for glue logic back in the day but that's it. Oh
>>>>> and I bought a small xilinx dev kit which I got to make a led flash then
>>>>> put in a drawer for 15 years.
>>>>
>>>> So your use of MCUs is based on inertia?
>>>
>>> Partly I suppose.
>>>
>>> Or I could say that my projects so far all require a microcontroller
>>> anyway, and it seemed likely that a separate FPGA was always going to be
>>> more expensive than, say, choosing a faster CPU.
>>>
>>> A STM32F4 can bitbang a PIO at 84MHz. (It can't do anything else then,
>>> but still...)
>>
>> I think what you are saying is that the MCU is a key part of your
>> design and you use a lot of code in it.
>
> Yes, basically. "a lot" being only e.g. about 64k probably, not much for
> a MCU but would push the price up for an FPGA I think.
>
>> Ok, if your emphasis in on using a commercial MCU that will do the
>> job.  But unless your MCU needs are just too large for something that
>> fits in an FPGA, you have it backwards in my opinion.  Why have both
>> when you can just use an FPGA?
>
> I'm pretty sure that a FPGA with enough RAM would be far too expensive
> (compared to the $3 200 MIPS CPU).

I won't pretend that an FPGA is the right solution for every task.  But 
I think MCUs are often used because that is what the designer is used to 
and FPGAs aren't understood well enough to consider.  Is "enough" RAM 
more than what a given FPGA has?  I don't know, how much RAM do you 
really need?  Most MCU projects I have worked on never had a realistic 
RAM estimate, it was all by the seat of the pants.  The fact that code 
uses RAM makes it harder to estimate.  FPGAs are a lot easier to design 
with in that regard.  RAM quantities have to be known exactly.  LUT 
counts have to be estimated though, so its not totally different.


> A M3 or M4 with attached FPGA + memories would be interesting, if it was
> at a reasonable price.

Or even an AVR... are you reading Ulf?  I think the requirements for 
MCUs are often overstated.  Most of the sort of work I do could be done 
with an 8051 (ugh!) if one of the higher performance devices especially, 
but I often don't have the real estate for a separate MCU unless I can 
treat it as an I/O expander.


> NXP have a M4 with attached M0 which sort of goes in that direction; the
> M0 does the more deterministic simple stuff, the M4 does the number
> crunching and runs the more complicated software.

Hell, I'd be estatic if they provided FPGAs in small enough packages so 
I can use a 32 pin QFN for an MCU and the same footprint for an FPGA. 
Well, Lattice *does* put an XO2 in a 32 QFN, but only 256 LUTs which is 
not big enough for much.  Why not 1 or 2 or 4 kLUT?  For some reason 
FPGA vendors all think you need more I/O and less LUTs.


>>>>> But could you give an example of your $3 one? Or a favorite?
>>>>
>
> [...]
>
>>>> You can get the 1 kLUT parts for under $3 and possibly the 4 kLUT
>>>> parts. It has been a while since I got a quote.  The 1 kLUT part is
>>>> big enough for a soft core MCU plus some custom logic.
>>>
>>> OK, thanks, will check them out.
>>
>> I haven't gotten a quote on these parts since they were bought by
>> Lattice.  I'd appreciate a pricing update if you get one.  They should
>> be able to do a lot better than the Digikey price, I know Xilinx and
>> Altera always do.  Heck, the Digikey pricing for most FPGAs doesn't go
>> above qty 1... if nothing else there should be some quantity price
>> breaks.
>
> Unfortunately I don't really have a live application, so would only be
> able to buy them as "education" at this stage.

I got a freebie eval board for the iCE40 but haven't fired it up.  I 
want to measure some power consumption numbers.  The data sheets changed 
the static current a while back, well after they had been out, just 
after Lattice bought SiliconBlue so I'm not sure what that was about. 
The 1 kLUT part went from around 40 uA to 100 uA quiescent current.  The 
dynamic current is still very low though, single digit mA with the 
device full of 16 bit counters running at 32 MHz.  But they seem to have 
removed that data when they changed data sheet formats.

-- 

Rick

Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-08-19 13:14 -0700
  Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-08-20 20:16 +0100
  Re: AREF bypass capacitance on ATMega2560? Vladimir Vassilevsky <nospam@nowhere.com> - 2013-08-21 14:47 -0500
    Re: AREF bypass capacitance on ATMega2560? Jim Stewart <jstewart@jkmicro.com> - 2013-08-21 13:18 -0700
    Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-08-21 16:38 -0700
      Re: AREF bypass capacitance on ATMega2560? "Tim Williams" <tmoranwms@charter.net> - 2013-08-21 21:30 -0500
        Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-08-22 10:51 -0700
          Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-06 16:26 -0400
            Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-06 13:33 -0700
              Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-06 17:12 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-06 16:10 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-06 23:59 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 08:10 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:03 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 10:59 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 14:54 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 12:39 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 16:44 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 14:48 -0700
                Re: AREF bypass capacitance on ATMega2560? "Tim Williams" <tmoranwms@charter.net> - 2013-09-07 17:10 -0500
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 15:34 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-08 00:57 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 16:56 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-09 17:07 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 10:19 -0700
                Re: AREF bypass capacitance on ATMega2560? Paul <paul@pcserviceselectronics.co.uk> - 2013-09-09 20:27 +0100
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 12:55 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-11 09:44 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 07:27 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-13 12:42 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-14 11:56 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 19:38 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 17:39 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 23:20 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 07:41 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-07 11:17 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:23 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:19 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 14:03 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 19:42 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-08 17:18 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-09 13:13 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 20:21 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-10 23:42 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-07 09:24 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 10:00 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-07 11:32 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:35 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:30 -0400
                Re: AREF bypass capacitance on ATMega2560? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2013-09-09 09:56 -0400
                Re: AREF bypass capacitance on ATMega2560? Robert Wessel <robertwessel2@yahoo.com> - 2013-09-12 11:50 -0500
                Re: AREF bypass capacitance on ATMega2560? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2013-09-12 15:06 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-12 14:57 +0200
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 00:21 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 14:08 +0200
                Re: AREF bypass capacitance on ATMega2560? Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-09-13 15:15 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 11:46 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 18:43 +0200
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 19:14 +0200
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 15:26 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 15:24 -0400
                Re: AREF bypass capacitance on ATMega2560? David Brown <david.brown@removethis.hesbynett.no> - 2013-09-13 20:22 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 09:32 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:44 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 12:46 -0700
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 13:33 -0700
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 13:46 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 17:05 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 15:23 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 19:02 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 16:45 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 23:16 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 08:05 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 14:27 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 12:56 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:07 -0400
                Re: AREF bypass capacitance on ATMega2560? Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-09-11 10:05 +0100
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 07:49 -0700
                Re: AREF bypass capacitance on ATMega2560? Paul <paul@pcserviceselectronics.co.uk> - 2013-09-11 16:54 +0100
                Re: AREF bypass capacitance on ATMega2560? "Tim Williams" <tmoranwms@charter.net> - 2013-09-11 11:25 -0500
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 09:49 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:40 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:38 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 09:34 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 14:29 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 13:01 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 16:22 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:09 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 16:15 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 14:20 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 18:15 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 15:57 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 19:46 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 17:15 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 20:20 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 07:17 -0700
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 12:17 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-09 19:30 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 16:38 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-10 14:02 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:41 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-11 00:04 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 07:53 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-11 21:50 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 09:58 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-12 18:54 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-12 16:17 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 10:03 -0700
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-12 19:24 +0200
                Re: AREF bypass capacitance on ATMega2560? Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2013-09-12 20:38 +0300
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 11:23 -0700
                Re: AREF bypass capacitance on ATMega2560? Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2013-09-12 22:36 +0300
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 12:41 -0700
                Re: AREF bypass capacitance on ATMega2560? Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2013-09-12 23:08 +0300
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 11:19 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-12 18:59 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 13:00 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-14 12:05 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-12 16:03 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 14:42 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 00:24 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 14:27 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-14 12:07 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-15 02:26 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-15 09:51 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-13 20:06 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 16:50 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 14:33 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 19:07 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 16:31 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 23:38 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-08 20:19 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:36 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:46 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:36 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-08 09:04 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 13:42 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-08 19:04 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 07:29 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-09 08:56 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:54 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 16:24 -0400
                Re: AREF bypass capacitance on ATMega2560? Ulf Samuelsson <ulf_samuelsson@invalid.telia.com> - 2013-09-07 20:11 +0200
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 15:06 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 12:54 -0700
    Re: AREF bypass capacitance on ATMega2560? Ulf Samuelsson <ulf_samuelsson@invalid.telia.com> - 2013-09-02 22:27 +0200

csiph-web