Re: AREF bypass capacitance on ATMega2560?

From	rickman <gnuarm@gmail.com>
Newsgroups	sci.electronics.design, comp.arch.embedded
Subject	Re: AREF bypass capacitance on ATMega2560?
Date	2013-09-07 15:06 -0400
Organization	A noiseless patient Spider
Message-ID	<l0ftg3$7tj$1@dont-email.me> (permalink)
References	(4 earlier) <b7n1d9F4bj0U1@mid.individual.net> <l0ddpd$14k$1@dont-email.me> <b8ushnFif3nU1@mid.individual.net> <l0dggl$i7r$1@dont-email.me> <l0fq7q$qvu$1@speranza.aioe.org>

Cross-posted to 2 groups.

Show all headers | View raw

On 9/7/2013 2:11 PM, Ulf Samuelsson wrote:
> rickman skrev 2013-09-06 23:12:
>> On 9/6/2013 4:33 PM, Joerg wrote:
>>> rickman wrote:
>>>> On 8/22/2013 1:51 PM, Joerg wrote:
>>>>> Tim Williams wrote:
>>>>>> "Joerg"<invalid@invalid.invalid> wrote in message
>>>>>> news:b7l1blFlu93U2@mid.individual.net...
>>>>>>>>> I saw people
>>>>>>>>> using 0.1uF and 0.47uF. The datasheet is silent about stuff like
>>>>>>>>> that,
>>>>>>>>> as usual.
>>>>>>>> It doesn't really matter.
>>>>>>>>
>>>>>>> However, not everyone knows that because they don't say much about
>>>>>>> the
>>>>>>> innards of the chip. It's my first ATMega case, or maybe the 2nd.
>>>>>>
>>>>>> Finally gave up and bit the uC bullet? ;-)
>>>>>>
>>>>>
>>>>> Sometimes you need it. A while ago I even had a switcher design that
>>>>> would have been totally impossible to do without a uC. But it does
>>>>> raise
>>>>> eyebrows if I request timers and port pins and MIPS, probably
>>>>> because of
>>>>> my analog background. "YOU want some of the uC resources? What for?"
>>>>
>>>> Sounds to me like you need FPGA resources moreso than an MCU. Are you
>>>> using the ADC or DAC, guess so or are you using the reference for the
>>>> brownout or something else? DACs are easy in FPGAs, ADCs not as easy.
>>>> Otherwise FPGAs do everything an MCU does plus...
>>>>
>>>
>>> I nearly always need ADC capability. Not for the brownout, I never trust
>>> anything on those chips for that, the POR/BOR/WDT goes external. FPGA
>>> have some downsides, they tend to become large, expensive and sometimes
>>> power-hungry when you need math capability or an MCU core.
>>
>> If your FPGA designs are expensive or power hungry, then you are doing
>> things you can't do in an MCU or you are not using FPGAs properly. They
>> don't need to use any more power than an MCU and in many cases less.
>> They certainly don't need to be significantly more expensive unless you
>> consider every dollar in your designs. At the very low end MCUs can be
>> under $1 and still have reasonable performance. For $1 you can't get
>> much in the way of programmable logic. For $3 however, you can get a
>> chip large enough for a CPU (with math) and room for your special logic.
>>
>>
>>> But the main
>>> issue for many projects is people. If the client has the experts in
>>> house like in this case, fine. But if not then one is better off using a
>>> uC where one can find a programmer in nearly every town. This is one
>>> reason I am often partial to the 8051.
>>
>> Do you work in *every* town? I find if I need a skill, it doesn't
>> matter where the worker is. I also find FPGA design is pretty common
>> these days. If you are ever short on FPGA design skills, give me a shout.
>>
>>
>>> Of course the beauty of FPGA is that the availability of very fast glue
>>> logic. Most uC are sorely lacking in that domain.
>>
>> Yes, the ideal chip would add a section of FPGA fabric to a conventional
>> MCU and vary the size just as they do the RAM and Flash. I think at
>> this point the problem is cultural. Most FPGA companies are all about
>> the big iron selling for $100 a chip min and the MCU makers don't
>> understand programmable logic. Xilinx and Cypress is good examples.
>> Zync is a very high end solution, great if it matches your problem. PSOC
>> is not a bad idea, but their idea of programmable logic isn't worth much.
>>
>> Give me a good $10 MCU/FPGA combo and I'll design the world! In the
>> meantime I'll be using soft cores. They are a lot easier to program
>> than an MCU anyway.
>>
>
> That was available with the FPSLIC. AVR core with 5/10/40k gates.
> Unfortunately the combination of features didn't make sense.
>
> 40 MHz AVR with only 36 kB SRAM.
>
> It would have been much better with an ARM7 core
> with an external memory bus.

I don't know about the external memory bus, but the problem I had with 
the FPSLIC is that I was never convinced it would last.  It did however 
even with a very limited market penetration.  I don't know how large the 
FPGA fabric was, nobody usefully measures FPGAs in gates anymore.  So 
I'm guessing it was actually very limited.  I know for a fact it was 
rather pricey.


> Since it was implemented in a technology, and not shrinked,
> it eventually become cheaper to use a softcore with
> a standard FPGA in a fine geometry technology.
>
> I came to the conclusion that an MCU company cannot compete with an FPGA
> company unless the programmable logic part is only a small percentage of
> the die.

Compete how?  The FPGA companies are leaving huge segments of the market 
open to anyone who has the guts to exploit it.

> It would make sense to have a 5 kgate FPGAs in a modern micro.

I think 5 kgate is a tiny FPGA - what a couple of 22V10s?  It would be 
about the size of a UART in an MCU design.  Try 2-5 kLUTs then you have 
a useful device.  Otherwise you are just pissing in the wind.  The FPGA 
fabric should be roughly the same die size as the Flash or RAM and 
should scale as the memory does.


> The Xilinx Zync and Altera SoC are nice tries, except that most
> of the standard peripherals suck and it is still beyond the price
> most customers I've seen are prepared to pay.

You need to understand their markets.  Their designs are very good for 
their markets which are high profit margin.  Thinking like a $1 MCU 
maker wont let you compete in their space.  But you can compete in a $2 
to $10 MCU+FPGA space.  So get out there and explain it to your 
management!  Otherwise you lose design wins to softcores which get 
cheaper every day.

-- 

Rick

Thread

AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-08-19 13:14 -0700
  Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-08-20 20:16 +0100
  Re: AREF bypass capacitance on ATMega2560? Vladimir Vassilevsky <nospam@nowhere.com> - 2013-08-21 14:47 -0500
    Re: AREF bypass capacitance on ATMega2560? Jim Stewart <jstewart@jkmicro.com> - 2013-08-21 13:18 -0700
    Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-08-21 16:38 -0700
      Re: AREF bypass capacitance on ATMega2560? "Tim Williams" <tmoranwms@charter.net> - 2013-08-21 21:30 -0500
        Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-08-22 10:51 -0700
          Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-06 16:26 -0400
            Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-06 13:33 -0700
              Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-06 17:12 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-06 16:10 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-06 23:59 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 08:10 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:03 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 10:59 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 14:54 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 12:39 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 16:44 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 14:48 -0700
                Re: AREF bypass capacitance on ATMega2560? "Tim Williams" <tmoranwms@charter.net> - 2013-09-07 17:10 -0500
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 15:34 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-08 00:57 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 16:56 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-09 17:07 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 10:19 -0700
                Re: AREF bypass capacitance on ATMega2560? Paul <paul@pcserviceselectronics.co.uk> - 2013-09-09 20:27 +0100
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 12:55 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-11 09:44 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 07:27 -0700
                Re: AREF bypass capacitance on ATMega2560? Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2013-09-13 12:42 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-14 11:56 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 19:38 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 17:39 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 23:20 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 07:41 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-07 11:17 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:23 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:19 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 14:03 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 19:42 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-08 17:18 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-09 13:13 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 20:21 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-10 23:42 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-07 09:24 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 10:00 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-07 11:32 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:35 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:30 -0400
                Re: AREF bypass capacitance on ATMega2560? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2013-09-09 09:56 -0400
                Re: AREF bypass capacitance on ATMega2560? Robert Wessel <robertwessel2@yahoo.com> - 2013-09-12 11:50 -0500
                Re: AREF bypass capacitance on ATMega2560? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2013-09-12 15:06 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-12 14:57 +0200
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 00:21 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 14:08 +0200
                Re: AREF bypass capacitance on ATMega2560? Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-09-13 15:15 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 11:46 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 18:43 +0200
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 19:14 +0200
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 15:26 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 15:24 -0400
                Re: AREF bypass capacitance on ATMega2560? David Brown <david.brown@removethis.hesbynett.no> - 2013-09-13 20:22 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 09:32 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 13:44 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 12:46 -0700
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 13:33 -0700
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 13:46 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 17:05 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 15:23 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 19:02 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 16:45 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 23:16 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 08:05 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 14:27 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 12:56 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:07 -0400
                Re: AREF bypass capacitance on ATMega2560? Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-09-11 10:05 +0100
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 07:49 -0700
                Re: AREF bypass capacitance on ATMega2560? Paul <paul@pcserviceselectronics.co.uk> - 2013-09-11 16:54 +0100
                Re: AREF bypass capacitance on ATMega2560? "Tim Williams" <tmoranwms@charter.net> - 2013-09-11 11:25 -0500
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 09:49 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:40 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:38 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 09:34 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 14:29 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 13:01 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 16:22 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:09 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 16:15 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 14:20 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 18:15 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 15:57 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 19:46 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-08 17:15 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 20:20 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 07:17 -0700
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 12:17 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-09 19:30 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-09 16:38 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-10 14:02 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:41 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-11 00:04 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-11 07:53 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-11 21:50 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 09:58 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-12 18:54 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-12 16:17 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 10:03 -0700
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-12 19:24 +0200
                Re: AREF bypass capacitance on ATMega2560? Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2013-09-12 20:38 +0300
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 11:23 -0700
                Re: AREF bypass capacitance on ATMega2560? Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2013-09-12 22:36 +0300
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 12:41 -0700
                Re: AREF bypass capacitance on ATMega2560? Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2013-09-12 23:08 +0300
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 11:19 -0700
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-12 18:59 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 13:00 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-14 12:05 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-12 16:03 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-12 14:42 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-13 00:24 -0400
                Re: AREF bypass capacitance on ATMega2560? Piotr Wyderski <peter.pan@neverland.mil> - 2013-09-13 14:27 +0200
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-14 12:07 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-15 02:26 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-15 09:51 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-13 20:06 -0400
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 16:50 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 14:33 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 19:07 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-07 16:31 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 23:38 -0400
                Re: AREF bypass capacitance on ATMega2560? Paul Rubin <no.email@nospam.invalid> - 2013-09-08 20:19 -0700
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:36 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:46 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 11:36 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-08 09:04 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 13:42 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-08 19:04 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-08 07:29 -0400
                Re: AREF bypass capacitance on ATMega2560? John Devereux <john@devereux.me.uk> - 2013-09-09 08:56 +0100
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-10 23:54 -0400
                Re: AREF bypass capacitance on ATMega2560? krw@attt.bizz - 2013-09-08 16:24 -0400
                Re: AREF bypass capacitance on ATMega2560? Ulf Samuelsson <ulf_samuelsson@invalid.telia.com> - 2013-09-07 20:11 +0200
                Re: AREF bypass capacitance on ATMega2560? rickman <gnuarm@gmail.com> - 2013-09-07 15:06 -0400
                Re: AREF bypass capacitance on ATMega2560? Joerg <invalid@invalid.invalid> - 2013-09-07 12:54 -0700
    Re: AREF bypass capacitance on ATMega2560? Ulf Samuelsson <ulf_samuelsson@invalid.telia.com> - 2013-09-02 22:27 +0200

csiph-web