Re: Comparing phase of physically distant signals

From	Don Y <this@isnotme.com>
Newsgroups	comp.arch.embedded, sci.electronics.design, comp.realtime
Subject	Re: Comparing phase of physically distant signals
Date	2013-08-03 12:08 -0700
Organization	Aioe.org NNTP Server
Message-ID	<ktjkf9$qe2$1@speranza.aioe.org> (permalink)
References	<kticf7$hg3$1@speranza.aioe.org> <b64l99Fbo0nU1@mid.individual.net>

Cross-posted to 3 groups.

Show all headers | View raw

Hi Joerg,

On 8/3/2013 8:17 AM, Joerg wrote:
> Don Y wrote:
>> I synchronize the "clocks" on physically distributed processors
>> such that two or more different machines can have a very finely
>> defined sense of "synchronized time" between themselves.
>>
>> During development, I would measure this time skew (among other
>> factors) by locating these devices side-by-side on a workbench
>> interconnected by "unquantified" cable.  Then, measuring the
>> time difference between to "pulse outputs" that I artificially
>> generate on each board.
>>
>> So, I could introduce a disturbance to the system and watch to
>> see how quickly -- and accurately -- the "clocks" (think FLL and
>> PLL) come back into sync.
>>
>> How do I practically do this when the devices are *deployed*
>> and physically distant (vs. "electrically distant" as in my
>> test case)?
>>
>> Two ideas come to mind:
>> 1) two equal length cables to connect the "pulse outputs"
>> from their respective originating devices to the test gear.
>
> Installers will hate this.

Exactly.  Imagine point A and point B are on different floors
in different buildings, etc.  "Hey, Tony, head out to the truck
and fetch the REALLY REALLY REALLY LONG cable set..."

(Then, *deploying* those cables -- even if only for an hour or so)

>> 2) two *radios* to do the same thing -- after accounting
>> for different flight times
>
> Installers will love this. But why different flight times? Where is this
> stuff going to be located? Down a borehole?

If you are measuring at a third point (without knowing its
distance/ToF from each of the other two points -- cuz you
have no reference you can rely upon!), then you need to
know the difference "in time" from the "reference output"
on each device, *through* the respective radio, through the
"air" and into the "receiver" -- before it can be applied
to some bit of test kit.

>> [Though I wonder how hard it is to qualify two different
>> radios to have the same delay, etc.  Far easier to trim
>> two long lengths of wire to the same length!]
>
> Aside from using GPS, WWV or some other reliable transmitter you could
> have a very stable oscillator on each module. Such as a TCXO. Then you
> have a transceiver on each. You perform a loopback echo locally, via an
> RF switch. That gives you the latency of each radio (should be pretty
> much the same for each module). Now only the path adds in which should
> normally be reciprocal.

[I don't want this to be a recurring cost.  So, the radio is
a "bag" attached solely for testing/calibration/troubleshooting]

You still don't know what the difference in the propagation
(through air) from each transceiver.

I.e., if the distance to device 1 is A and the distance to device 2
is B, then there will be a difference between the signals arriving
that corresponds to the difference between A and B.  Even after you
compensate for any differences in the radios themselves.

[The same is true with a single radio at device 1 "received" at
device 2 -- how much time did the RF signal take to get to device
2 cuz it's arrival will occur after device 2's notion of the
device 1 event with which it is intended to correlate.]

That's the appeal between "two equal lengths of wire" -- the
delay through each can be made "identical".

>> Of course, I would like to minimize the recurring cost of
>> any solution as it is just present for system qualification
>> (and troubleshooting) and offers no run-time advantage to
>> the design.
>
> If the distance is small you can use a cheap transceiver chip or module.
> If using a chip and rolling your own hardware you must usually go
> through the radio cert for "intentional radiator" at the EMC lab which
> adds NRE.

Thread

Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 00:45 -0700
  Re: Comparing phase of physically distant signals Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-08-03 07:51 +0000
  Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 09:58 +0100
    Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 13:21 +0300
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 12:16 +0100
      Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 11:56 -0700
        Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:17 +0100
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 13:41 -0700
            Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 22:46 +0100
              Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 14:57 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 23:09 +0100
    Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 13:58 +0300
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 12:30 +0100
    Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 16:08 +0300
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 14:22 +0100
        Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 16:38 +0300
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 10:46 -0700
      Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 10:40 -0700
        Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:04 +0100
        Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-04 15:55 +0200
          Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-04 19:42 +0300
            Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-04 21:08 +0200
              Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-05 15:28 +0300
                Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-05 22:17 +0200
                Re: Comparing phase of physically distant signals Richard Damon <Richard@Damon-Family.org> - 2013-08-05 23:20 -0400
    Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 14:26 +0100
    Re: Comparing phase of physically distant signals George Neuner <gneuner2@comcast.net> - 2013-08-03 14:47 -0400
  Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 08:17 -0700
    Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:08 -0700
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:37 +0100
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:57 -0700
          Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-04 15:58 +0200
      Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 12:44 -0700
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 18:36 -0700
          Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-04 09:56 -0700
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-05 14:53 -0700
              Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-05 15:38 -0700
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 01:25 -0700
                Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-07 08:06 -0700
                Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-07 09:21 -0700
  Re: Comparing phase of physically distant signals josephkk <joseph_barrett@sbcglobal.net> - 2013-08-03 15:40 +0000
    Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 10:05 -0700
      Re: Comparing phase of physically distant signals John S <Sophi.2@invalid.org> - 2013-08-03 12:13 -0500
        Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 10:26 -0700
          Re: Comparing phase of physically distant signals John S <Sophi.2@invalid.org> - 2013-08-03 12:51 -0500
            Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 11:54 -0700
              Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:27 +0100
                Re: Comparing phase of physically distant signals George Neuner <gneuner2@comcast.net> - 2013-08-05 03:26 -0400
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-05 10:34 +0100
                Re: Comparing phase of physically distant signals Richard Damon <Richard@Damon-Family.org> - 2013-08-05 23:29 -0400
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 08:53 +0100
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:49 -0700
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:34 -0700
      Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:18 -0700
        Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 12:52 -0700
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 13:21 -0700
            Re: Comparing phase of physically distant signals Jeff Liebermann <jeffl@cruzio.com> - 2013-08-03 13:31 -0700
              Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 14:46 -0700
                Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 15:03 -0700
                Re: Comparing phase of physically distant signals Jeff Liebermann <jeffl@cruzio.com> - 2013-08-03 17:25 -0700
            Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 14:50 -0700
    Re: Comparing phase of physically distant signals "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2013-08-04 11:06 +0100
      Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-04 12:19 -0700
  Re: Comparing phase of physically distant signals John Larkin <jjlarkin@highNOTlandTHIStechnologyPART.com> - 2013-08-03 11:47 -0700
  Re: Comparing phase of physically distant signals Richard Damon <Richard@Damon-Family.org> - 2013-08-03 18:23 -0400
  Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-05 16:53 +0100
    Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-05 13:19 -0700
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 00:27 +0100
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-05 20:09 -0700
          Re: Comparing phase of physically distant signals Paul Rubin <no.email@nospam.invalid> - 2013-08-05 22:12 -0700
            Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 09:12 +0100
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 01:47 -0700
              Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 10:08 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 02:25 -0700
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 02:48 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 10:49 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 03:06 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 11:57 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 10:28 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 21:52 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 01:34 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-07 09:46 +0100
              Re: Comparing phase of physically distant signals Les Cargill <lcargill99@comcast.com> - 2013-08-06 07:22 -0500
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 10:42 -0700
                Re: Comparing phase of physically distant signals Les Cargill <lcargill99@comcast.com> - 2013-08-06 23:04 -0500
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 23:50 -0700
                Re: Comparing phase of physically distant signals Les Cargill <lcargill99@comcast.com> - 2013-08-07 13:05 -0500
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 18:22 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-08 09:35 +0100
              Re: Comparing phase of physically distant signals Paul Rubin <no.email@nospam.invalid> - 2013-08-06 22:18 -0700
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 03:09 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-07 12:39 +0100
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-07 13:18 +0100
          Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 09:23 +0100
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 02:02 -0700
          Re: Comparing phase of physically distant signals "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2013-08-06 09:49 +0100
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 02:17 -0700
  Re: Comparing phase of physically distant signals Paul E Bennett <Paul_E.Bennett@topmail.co.uk> - 2013-08-16 21:07 +0100
    Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-16 14:50 -0700
      Re: Comparing phase of physically distant signals Paul E Bennett <Paul_E.Bennett@topmail.co.uk> - 2013-08-18 19:55 +0100
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-19 11:43 -0700
          Re: Comparing phase of physically distant signals Paul E Bennett <Paul_E.Bennett@topmail.co.uk> - 2013-08-20 21:43 +0100
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-20 14:49 -0700

csiph-web