Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.arch.embedded > #10727
| Date | 2012-12-08 09:44 +0000 |
|---|---|
| From | MK <mk@nospam.co.uk> |
| Newsgroups | comp.arch.embedded |
| Subject | Re: baud rate autodetection on AVR 8-bit? |
| References | <86sj7iuetv.fsf@gray.siamics.net> <8s04c8lfe98k422gq3gp8eofpgd0nqecj0@4ax.com> <86obi5vn6u.fsf@gray.siamics.net> <fc10fde9-58f3-4a0d-9da5-d1f9568e4379@googlegroups.com> <86k3stvbc1.fsf@gray.siamics.net> |
| Message-ID | <OqWdnRW3iruTkV7NnZ2dnUVZ7o6dnZ2d@bt.com> (permalink) |
On 07/12/2012 20:47, Ivan Shmakov wrote: >>>>>> Dave Nadler <drn@nadler.com> writes: >>>>>> On Friday, December 7, 2012 11:31:21 AM UTC-5, Ivan Shmakov wrote: > > >> Well, I guess I can use a pin change interrupt instead, and just > >> save the timer's counter in the handler. (Thus introducing a > >> constant delay, which will disappear anyway in the delta.) > > > No "capture" function available on the timer, so that you get an > > exact measurement? Sorry I don't remember on this part... > > AIUI, ATmega8 only allows for input capture to happen on an > "event" occuring either on analog comparator output, or a > specific ICP1 pin. Unfortunately, I'd need the latter for GPIO. > (Naturally, ICP1 is distinct from UART's RxD.) > Since you are starting out on a new project why use an obsolete processor ? You can buy an LPC1113 (or some one else's ARM Cortex M0) for less money than an ATmega8 and it has much better timers with input capture. It also has a good 10x the performance ! Michael Kellett
Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-07 21:17 +0700
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-07 10:28 -0500
Re: baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-07 23:31 +0700
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-07 12:42 -0500
Re: baud rate autodetection on AVR 8-bit? mike <ham789@netzero.net> - 2012-12-07 13:35 -0800
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-07 20:07 -0500
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-07 23:43 -0800
Re: baud rate autodetection on AVR 8-bit? Tim Wescott <tim@seemywebsite.com> - 2012-12-07 13:07 -0600
Re: baud rate autodetection on AVR 8-bit? Dave Nadler <drn@nadler.com> - 2012-12-07 12:09 -0800
Re: baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-08 03:47 +0700
Re: baud rate autodetection on AVR 8-bit? MK <mk@nospam.co.uk> - 2012-12-08 09:44 +0000
8-bit vs. 32-bit MCU's Ivan Shmakov <oneingray@gmail.com> - 2012-12-08 18:31 +0700
Re: 8-bit vs. 32-bit MCU's MK <mk@nospam.co.uk> - 2012-12-09 14:13 +0000
Re: 8-bit vs. 32-bit MCU's Ivan Shmakov <oneingray@gmail.com> - 2012-12-09 22:52 +0700
Re: baud rate autodetection on AVR 8-bit? upsidedown@downunder.com - 2012-12-08 15:01 +0200
Re: baud rate autodetection on AVR 8-bit? Dombo <dombo@disposable.invalid> - 2012-12-08 15:18 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Glenn <glenn2233@gmail.com> - 2012-12-09 10:47 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2012-12-09 10:22 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] "Bruce Varley" <bv@NoSpam.com> - 2012-12-09 19:07 +0800
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Paul <paul@pcserviceselectronics.co.uk> - 2012-12-09 13:27 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2012-12-09 16:19 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] "TTman" <pcw1.cad@ntlworld.com> - 2012-12-09 15:38 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] amdyer@gmail.com - 2012-12-09 07:45 -0800
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] upsidedown@downunder.com - 2012-12-09 17:45 +0200
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Paul <paul@pcserviceselectronics.co.uk> - 2012-12-09 21:30 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] John Larkin <jjlarkin@highNOTlandTHIStechnologyPART.com> - 2012-12-09 09:02 -0800
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Lanarcam <lanarcam1@yahoo.fr> - 2012-12-09 18:13 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] upsidedown@downunder.com - 2012-12-09 19:44 +0200
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Paul <paul@pcserviceselectronics.co.uk> - 2012-12-09 21:32 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Robert Wessel <robertwessel2@yahoo.com> - 2012-12-10 00:35 -0600
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] josephkk <joseph_barrett@sbcglobal.net> - 2012-12-12 20:30 -0800
Re: baud rate autodetection on AVR 8-bit? "Meindert Sprang" <ms@NOJUNKcustomORSPAMware.nl> - 2012-12-10 13:38 +0100
Re: baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-10 20:19 +0700
Re: baud rate autodetection on AVR 8-bit? "Meindert Sprang" <ms@NOJUNKcustomORSPAMware.nl> - 2012-12-10 16:24 +0100
Re: baud rate autodetection on AVR 8-bit? Arlet Ottens <usenet+5@c-scape.nl> - 2012-12-10 16:49 +0100
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-12 08:50 -0500
Re: baud rate autodetection on AVR 8-bit? j.m.granville@gmail.com - 2012-12-11 21:22 -0800
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 00:29 -0600
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-11 23:43 -0800
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 02:38 -0600
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-12 07:46 -0800
Re: baud rate autodetection on AVR 8-bit? linnix <me@linnix.info-for.us> - 2012-12-12 10:50 -0800
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 12:42 -0800
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 12:56 -0800
Re: baud rate autodetection on AVR 8-bit? upsidedown@downunder.com - 2012-12-12 23:22 +0200
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 15:39 -0600
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 15:13 -0800
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 15:28 -0800
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 18:41 -0600
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 17:12 -0800
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-12 12:43 -0800
Communications under pressure (was Re: baud rate...) Frnak McKenney <frnak@far.from.the.madding.crowd.com> - 2012-12-13 10:25 -0600
Re: Communications under pressure (was Re: baud rate...) Robert Wessel <robertwessel2@yahoo.com> - 2012-12-13 12:34 -0600
Re: Communications under pressure (was Re: baud rate...) upsidedown@downunder.com - 2012-12-14 10:33 +0200
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-14 07:43 -0800
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-13 16:47 -0800
Re: Communications under pressure (was Re: baud rate...) Jon Kirwan <jonk@infinitefactors.org> - 2012-12-13 18:22 -0800
Re: Communications under pressure (was Re: baud rate...) Jon Kirwan <jonk@infinitefactors.org> - 2012-12-13 18:27 -0800
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-13 23:20 -0800
Re: Communications under pressure (was Re: baud rate...) Frank Miles <fpm@u.washington.edu> - 2012-12-14 17:50 +0000
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-14 14:28 -0800
serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-14 23:21 +0700
Re: serial host-to-device communication in amateur designs Rob Gaddi <rgaddi@technologyhighland.invalid> - 2012-12-14 09:18 -0800
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-14 11:19 -0800
Re: serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-16 21:00 +0700
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-16 13:46 -0800
USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-17 00:53 +0000
Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-16 17:46 -0800
Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-17 13:27 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Mel Wilson <mwilson@the-wire.com> - 2012-12-17 10:32 -0500
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs me@linnix.info-for.us - 2012-12-17 11:13 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-17 12:03 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-17 12:17 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Christopher Head <chead@is.invalid> - 2012-12-17 23:36 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-17 23:54 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-18 13:06 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs j.m.granville@gmail.com - 2012-12-18 14:04 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-18 14:13 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Christopher Head <chead@is.invalid> - 2012-12-19 02:37 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-19 12:59 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Rocky <RobertGush@gmail.com> - 2012-12-19 10:19 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 10:43 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 10:39 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 10:44 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Christopher Head <chead@is.invalid> - 2012-12-19 18:42 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 21:05 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-20 14:13 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-20 11:58 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Waldek Hebisch <hebisch@math.uni.wroc.pl> - 2012-12-24 00:41 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Waldek Hebisch <hebisch@math.uni.wroc.pl> - 2012-12-24 15:45 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-24 11:40 -0800
Re: serial host-to-device communication in amateur designs Frnak McKenney <frnak@far.from.the.madding.crowd.com> - 2012-12-20 10:00 -0600
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-20 11:54 -0800
Re: serial host-to-device communication in amateur designs Rob Gaddi <rgaddi@technologyhighland.invalid> - 2012-12-20 12:01 -0800
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-20 12:27 -0800
Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-14 17:53 +0000
Re: serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-15 01:26 +0700
Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-14 19:30 +0000
Re: serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-15 11:25 +0700
Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-17 00:29 +0000
Re: serial host-to-device communication in amateur designs me@linnix.info-for.us - 2012-12-17 11:05 -0800
Re: serial host-to-device communication in amateur designs Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-14 14:34 -0500
Re: serial host-to-device communication in amateur designs Paul <paul@pcserviceselectronics.co.uk> - 2012-12-14 23:25 +0000
finer pitches Ivan Shmakov <oneingray@gmail.com> - 2012-12-16 20:48 +0700
Re: serial host-to-device communication in amateur designs Mark Borgerson <mborgerson@comcast.net> - 2012-12-14 21:26 -0800
csiph-web