Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.arch.embedded > #10829
| From | Ivan Shmakov <oneingray@gmail.com> |
|---|---|
| Newsgroups | comp.arch.embedded |
| Subject | finer pitches |
| Date | 2012-12-16 20:48 +0700 |
| Organization | Aioe.org NNTP Server |
| Message-ID | <86ip82nm5o.fsf_-_@gray.siamics.net> (permalink) |
| References | (4 earlier) <rufgc89c170lh0o16ddk022rrsrhgq5qtd@4ax.com> <864njoppu0.fsf_-_@gray.siamics.net> <kafp1t$79j$1@dont-email.me> <86vcc4o5gb.fsf@gray.siamics.net> <MPG.2b35c5bdd5ca0e91989745@172.16.0.1> |
>>>>> Paul <paul@pcserviceselectronics.co.uk> writes: >>>>> In article <86vcc4o5gb.fsf@gray.siamics.net>, oneingray@gmail.com says... >>>>> Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> writes: [...] >>> Your previous postings imply that you are doing hobbyist type work >>> and you don't say what packaging you need the device in so as much >>> as it pains me :-), I am going to point you to the PIC18F range if >>> you want it in PDIP. >> My guess is that anything with 0.8 mm or larger spacing will be just >> fine. 0.5 mm pitch feels a bit too fine to tackle for an amateur, >> but I'm yet to try it myself. > Try getting a Schmart Board then to mount it very easily. > Look here http://www.schmartboard.com/ Indeed, I've ordered some LQFP 48 to DIP break-out boards from http://dipmicro.com/ (I guess I'd need to wait for quite some time for delivery, since they're on the other side of the Earth, literally), not to mention that I have a couple of home-made SO prototyping boards, each with a TQFP 32 landing space (the design that could certainly be improved.) Yet, as I've said before, my intent is to eventually publish my designs for the others to use (and improve), and I'm still in doubt that mounting a 0.5 mm pitch IC would be an easy thing for a J. Random Amateur. But well, perhaps I'm wrong on that. -- FSF associate member #7257
Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-07 21:17 +0700
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-07 10:28 -0500
Re: baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-07 23:31 +0700
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-07 12:42 -0500
Re: baud rate autodetection on AVR 8-bit? mike <ham789@netzero.net> - 2012-12-07 13:35 -0800
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-07 20:07 -0500
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-07 23:43 -0800
Re: baud rate autodetection on AVR 8-bit? Tim Wescott <tim@seemywebsite.com> - 2012-12-07 13:07 -0600
Re: baud rate autodetection on AVR 8-bit? Dave Nadler <drn@nadler.com> - 2012-12-07 12:09 -0800
Re: baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-08 03:47 +0700
Re: baud rate autodetection on AVR 8-bit? MK <mk@nospam.co.uk> - 2012-12-08 09:44 +0000
8-bit vs. 32-bit MCU's Ivan Shmakov <oneingray@gmail.com> - 2012-12-08 18:31 +0700
Re: 8-bit vs. 32-bit MCU's MK <mk@nospam.co.uk> - 2012-12-09 14:13 +0000
Re: 8-bit vs. 32-bit MCU's Ivan Shmakov <oneingray@gmail.com> - 2012-12-09 22:52 +0700
Re: baud rate autodetection on AVR 8-bit? upsidedown@downunder.com - 2012-12-08 15:01 +0200
Re: baud rate autodetection on AVR 8-bit? Dombo <dombo@disposable.invalid> - 2012-12-08 15:18 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Glenn <glenn2233@gmail.com> - 2012-12-09 10:47 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2012-12-09 10:22 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] "Bruce Varley" <bv@NoSpam.com> - 2012-12-09 19:07 +0800
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Paul <paul@pcserviceselectronics.co.uk> - 2012-12-09 13:27 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2012-12-09 16:19 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] "TTman" <pcw1.cad@ntlworld.com> - 2012-12-09 15:38 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] amdyer@gmail.com - 2012-12-09 07:45 -0800
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] upsidedown@downunder.com - 2012-12-09 17:45 +0200
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Paul <paul@pcserviceselectronics.co.uk> - 2012-12-09 21:30 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] John Larkin <jjlarkin@highNOTlandTHIStechnologyPART.com> - 2012-12-09 09:02 -0800
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Lanarcam <lanarcam1@yahoo.fr> - 2012-12-09 18:13 +0100
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] upsidedown@downunder.com - 2012-12-09 19:44 +0200
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Paul <paul@pcserviceselectronics.co.uk> - 2012-12-09 21:32 +0000
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] Robert Wessel <robertwessel2@yahoo.com> - 2012-12-10 00:35 -0600
Re: baud rate autodetection on AVR 8-bit? [ User friendly RS-232/EIA-232 ? ] josephkk <joseph_barrett@sbcglobal.net> - 2012-12-12 20:30 -0800
Re: baud rate autodetection on AVR 8-bit? "Meindert Sprang" <ms@NOJUNKcustomORSPAMware.nl> - 2012-12-10 13:38 +0100
Re: baud rate autodetection on AVR 8-bit? Ivan Shmakov <oneingray@gmail.com> - 2012-12-10 20:19 +0700
Re: baud rate autodetection on AVR 8-bit? "Meindert Sprang" <ms@NOJUNKcustomORSPAMware.nl> - 2012-12-10 16:24 +0100
Re: baud rate autodetection on AVR 8-bit? Arlet Ottens <usenet+5@c-scape.nl> - 2012-12-10 16:49 +0100
Re: baud rate autodetection on AVR 8-bit? Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-12 08:50 -0500
Re: baud rate autodetection on AVR 8-bit? j.m.granville@gmail.com - 2012-12-11 21:22 -0800
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 00:29 -0600
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-11 23:43 -0800
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 02:38 -0600
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-12 07:46 -0800
Re: baud rate autodetection on AVR 8-bit? linnix <me@linnix.info-for.us> - 2012-12-12 10:50 -0800
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 12:42 -0800
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 12:56 -0800
Re: baud rate autodetection on AVR 8-bit? upsidedown@downunder.com - 2012-12-12 23:22 +0200
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 15:39 -0600
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 15:13 -0800
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 15:28 -0800
Re: baud rate autodetection on AVR 8-bit? Robert Wessel <robertwessel2@yahoo.com> - 2012-12-12 18:41 -0600
Re: baud rate autodetection on AVR 8-bit? Jon Kirwan <jonk@infinitefactors.org> - 2012-12-12 17:12 -0800
Re: baud rate autodetection on AVR 8-bit? Mark Borgerson <mborgerson@comcast.net> - 2012-12-12 12:43 -0800
Communications under pressure (was Re: baud rate...) Frnak McKenney <frnak@far.from.the.madding.crowd.com> - 2012-12-13 10:25 -0600
Re: Communications under pressure (was Re: baud rate...) Robert Wessel <robertwessel2@yahoo.com> - 2012-12-13 12:34 -0600
Re: Communications under pressure (was Re: baud rate...) upsidedown@downunder.com - 2012-12-14 10:33 +0200
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-14 07:43 -0800
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-13 16:47 -0800
Re: Communications under pressure (was Re: baud rate...) Jon Kirwan <jonk@infinitefactors.org> - 2012-12-13 18:22 -0800
Re: Communications under pressure (was Re: baud rate...) Jon Kirwan <jonk@infinitefactors.org> - 2012-12-13 18:27 -0800
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-13 23:20 -0800
Re: Communications under pressure (was Re: baud rate...) Frank Miles <fpm@u.washington.edu> - 2012-12-14 17:50 +0000
Re: Communications under pressure (was Re: baud rate...) Mark Borgerson <mborgerson@comcast.net> - 2012-12-14 14:28 -0800
serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-14 23:21 +0700
Re: serial host-to-device communication in amateur designs Rob Gaddi <rgaddi@technologyhighland.invalid> - 2012-12-14 09:18 -0800
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-14 11:19 -0800
Re: serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-16 21:00 +0700
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-16 13:46 -0800
USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-17 00:53 +0000
Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-16 17:46 -0800
Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-17 13:27 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Mel Wilson <mwilson@the-wire.com> - 2012-12-17 10:32 -0500
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs me@linnix.info-for.us - 2012-12-17 11:13 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-17 12:03 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-17 12:17 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Christopher Head <chead@is.invalid> - 2012-12-17 23:36 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-17 23:54 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-18 13:06 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs j.m.granville@gmail.com - 2012-12-18 14:04 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-18 14:13 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Christopher Head <chead@is.invalid> - 2012-12-19 02:37 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-19 12:59 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Rocky <RobertGush@gmail.com> - 2012-12-19 10:19 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 10:43 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 10:39 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 10:44 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Christopher Head <chead@is.invalid> - 2012-12-19 18:42 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-19 21:05 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-20 14:13 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-20 11:58 -0800
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Waldek Hebisch <hebisch@math.uni.wroc.pl> - 2012-12-24 00:41 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Waldek Hebisch <hebisch@math.uni.wroc.pl> - 2012-12-24 15:45 +0000
Re: Writing a USB device stack, was: Re: USB CDC ACM, was: Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-24 11:40 -0800
Re: serial host-to-device communication in amateur designs Frnak McKenney <frnak@far.from.the.madding.crowd.com> - 2012-12-20 10:00 -0600
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-20 11:54 -0800
Re: serial host-to-device communication in amateur designs Rob Gaddi <rgaddi@technologyhighland.invalid> - 2012-12-20 12:01 -0800
Re: serial host-to-device communication in amateur designs Jon Kirwan <jonk@infinitefactors.org> - 2012-12-20 12:27 -0800
Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-14 17:53 +0000
Re: serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-15 01:26 +0700
Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-14 19:30 +0000
Re: serial host-to-device communication in amateur designs Ivan Shmakov <oneingray@gmail.com> - 2012-12-15 11:25 +0700
Re: serial host-to-device communication in amateur designs Simon Clubley <clubley@remove_me.eisner.decus.org-Earth.UFP> - 2012-12-17 00:29 +0000
Re: serial host-to-device communication in amateur designs me@linnix.info-for.us - 2012-12-17 11:05 -0800
Re: serial host-to-device communication in amateur designs Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-14 14:34 -0500
Re: serial host-to-device communication in amateur designs Paul <paul@pcserviceselectronics.co.uk> - 2012-12-14 23:25 +0000
finer pitches Ivan Shmakov <oneingray@gmail.com> - 2012-12-16 20:48 +0700
Re: serial host-to-device communication in amateur designs Mark Borgerson <mborgerson@comcast.net> - 2012-12-14 21:26 -0800
csiph-web