Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > uk.tech.broadcast > #71014
| From | tony sayer <tony@bancom.co.uk> |
|---|---|
| Newsgroups | uk.tech.broadcast |
| Subject | Re: TV/Radio aerial signal power levels: simple explanation needed. |
| Date | 2026-10-18 20:57 +0100 |
| Organization | Bancom Comms |
| Message-ID | <I8yxhXClSS1qFwZs@bancom.co.uk> (permalink) |
| References | <11at4ui$39d80$1@dont-email.me> <njheafFca2tU1@mid.individual.net> <11b1bgo$pici$1@dont-email.me> |
In article <11b1bgo$pici$1@dont-email.me>, J. P. Gilliver
<G6JPG@255soft.uk> scribeth thus
>On 2026/10/17 15:16:47, Spike wrote:
>> David Paste <pastedavid@gmail.com> wrote:
>[]
>>> My radio doesn’t always get a good signal; in some weathers there is a
>>> background hiss. I would like to get rid of this. I suppose an amplifier
>>> at the aerial itself would be needed?
>[]
>> If you get background hiss on the FM station of interest when using your
>> dipole, first check that it is oriented correctly for the station of
>> interest - the element should be at right angles to the line between you
>> and the transmitter.
>
>And should be oriented at the same polarisation as the transmitter:
>you'd have to ask them, or look online, or go look at the tramsmitter
>mast. Stations intended for serious home users with home aerials _useD_
>to tend to use horizontal polarisation, those wanting users in cars
>_used_ to use vertical, and those wanting both wither slant or circular.
>
>>
>> Presumably this is a pole-mounted external aerial. How long has it been in
>> place?
>>
>> It’s possible that your coax feeder and/or termination at the dipole end
>> has corroded or is waterlogged or suffering some form of wind damage, not
>> an uncommon condition for aerials that have been in place for a few years.
>> Has the quality of the signal received deteriorated over time?
>>
>> Can you receive the station of interest on a portable receiver having a
>> whip aerial? If so, is it noticeably noisier than the main setup? You will
>> probably need to move the radio about to get the best signal.
>>
>>
>And vary the polarisation of its aerial to find what the sender is using
>(do this outside to avoid bouncing round inside which _can_ change it a
>bit).
Which is a good aspect of mixed polarisation as if it does get bounced
around the polarisation changes so what was Vert is mow Horiz and vice
versa..
If you get the chance drive around an urban area with a battery powered
spectrum analyser the stations that used mixed are far more smoother in
level..
--
Tony Sayer
Man is least himself when he talks in his own person.
Give him a keyboard, and he will reveal himself.
Back to uk.tech.broadcast | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-16 13:22 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-16 14:08 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:18 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. John Williamson <johnwilliamson@btinternet.com> - 2026-10-20 16:46 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:09 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:27 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-17 14:16 +0000
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-18 03:39 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. tony sayer <tony@bancom.co.uk> - 2026-10-18 20:57 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:23 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-20 16:05 +0000
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:10 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:32 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. Rink <rink.hof.haalditmaarweg@planet.nl> - 2026-11-09 15:24 +0100
csiph-web