Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > uk.tech.broadcast > #71001
| From | Spike <aero.spike@mail.com> |
|---|---|
| Newsgroups | uk.tech.broadcast |
| Subject | Re: TV/Radio aerial signal power levels: simple explanation needed. |
| Date | 2026-10-17 14:16 +0000 |
| Message-ID | <njheafFca2tU1@mid.individual.net> (permalink) |
| References | <11at4ui$39d80$1@dont-email.me> |
David Paste <pastedavid@gmail.com> wrote: > Hello, > > Can anyone explain to me like I’m an idiot, because I’m an idiot, about > the signal power levels at the receiver end of a piece of coax? > > (I’ve posted this in uk.tech.broadcast and uk.d-i-y) > > BACKGROUND > > Classic FM, for example, broadcasts from Holme Moss on 101.1 MHz with an > output of 250 kW (which I assume is ERP, which I sort of understand as > the power focussed in particular direction by it’s transmitting antenna > in the same way light can be focussed by glass lenses). > > There is attenuation as the signal travels to me (50.31 km away as the > crow flies), and this attenuation follows an inverse square law, so 1/2 > 531 096 100 > > so: > 250 000 000 / 2 531 096 100 > which equals > 0.0987714374 > > I assume this is in watts? > > And this is the signal strength in free air at the position of my aerial > (half wave dipole). > > Then there is about 20 metres of coax, which I believe is RG-11, which > according to a datasheet I found on the RS website has an attenuation of > 74.8 dB per 100 metres at 700 MHz. > > I do not know how to work out the power loss through that 20 metres of > coax as I do not really understand dB, other than “it’s a comparative > level of power”. I’ve no idea what that means. > > My radio (which is in the cellar, hence the need for an external aerial) > has the following details in the manual: > > Sensitivity = 2.5 µV (IHF) (what is IHF?) > > S/N 26 dB 2.2 µV > > So it needs microvolts but how is this figure related to the watts from > the transmitter? Do I need to know the current in the coax? > > How is the signal strength measured? Does it need a special meter, or > can a multimeter be used? > > My radio doesn’t always get a good signal; in some weathers there is a > background hiss. I would like to get rid of this. I suppose an amplifier > at the aerial itself would be needed? > > Thanks in advance for any help, and apologies for the lengthy question. > > D.P. If you get background hiss on the FM station of interest when using your dipole, first check that it is oriented correctly for the station of interest - the element should be at right angles to the line between you and the transmitter. Presumably this is a pole-mounted external aerial. How long has it been in place? It’s possible that your coax feeder and/or termination at the dipole end has corroded or is waterlogged or suffering some form of wind damage, not an uncommon condition for aerials that have been in place for a few years. Has the quality of the signal received deteriorated over time? Can you receive the station of interest on a portable receiver having a whip aerial? If so, is it noticeably noisier than the main setup? You will probably need to move the radio about to get the best signal. -- Spike
Back to uk.tech.broadcast | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-16 13:22 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-16 14:08 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:18 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. John Williamson <johnwilliamson@btinternet.com> - 2026-10-20 16:46 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:09 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:27 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-17 14:16 +0000
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-18 03:39 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. tony sayer <tony@bancom.co.uk> - 2026-10-18 20:57 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:23 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-20 16:05 +0000
Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:10 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:32 +0100
Re: TV/Radio aerial signal power levels: simple explanation needed. Rink <rink.hof.haalditmaarweg@planet.nl> - 2026-11-09 15:24 +0100
csiph-web