Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > uk.tech.broadcast > #71001

Re: TV/Radio aerial signal power levels: simple explanation needed.

From Spike <aero.spike@mail.com>
Newsgroups uk.tech.broadcast
Subject Re: TV/Radio aerial signal power levels: simple explanation needed.
Date 2026-10-17 14:16 +0000
Message-ID <njheafFca2tU1@mid.individual.net> (permalink)
References <11at4ui$39d80$1@dont-email.me>

Show all headers | View raw


David Paste <pastedavid@gmail.com> wrote:
> Hello,
> 
> Can anyone explain to me like I’m an idiot, because I’m an idiot, about 
> the signal power levels at the receiver end of a piece of coax?
> 
> (I’ve posted this in uk.tech.broadcast and uk.d-i-y)
> 
> BACKGROUND
> 
> Classic FM, for example, broadcasts from Holme Moss on 101.1 MHz with an 
> output of 250 kW (which I assume is ERP, which I sort of understand as 
> the power focussed in particular direction by it’s transmitting antenna 
> in the same way light can be focussed by glass lenses).
> 
> There is attenuation as the signal travels to me (50.31 km away as the 
> crow flies), and this attenuation follows an inverse square law, so 1/2 
> 531 096 100
> 
> so:
> 250 000 000 / 2 531 096 100
> which equals
> 0.0987714374
> 
> I assume this is in watts?
> 
> And this is the signal strength in free air at the position of my aerial 
> (half wave dipole).
> 
> Then there is about 20 metres of coax, which I believe is RG-11, which 
> according to a datasheet I found on the RS website has an attenuation of 
> 74.8 dB per 100 metres at 700 MHz.
> 
> I do not know how to work out the power loss through that 20 metres of 
> coax as I do not really understand dB, other than “it’s a comparative 
> level of power”. I’ve no idea what that means.
> 
> My radio (which is in the cellar, hence the need for an external aerial) 
> has the following details in the manual:
> 
> Sensitivity = 2.5 µV (IHF) (what is IHF?)
> 
> S/N 26 dB 2.2 µV
> 
> So it needs microvolts but how is this figure related to the watts from 
> the transmitter? Do I need to know the current in the coax?
> 
> How is the signal strength measured? Does it need a special meter, or 
> can a multimeter be used?
> 
> My radio doesn’t always get a good signal; in some weathers there is a 
> background hiss. I would like to get rid of this. I suppose an amplifier 
> at the aerial itself would be needed?
> 
> Thanks in advance for any help, and apologies for the lengthy question.
> 
> D.P.

If you get background hiss on the FM station of interest when using your
dipole, first check that it is oriented correctly for the station of
interest - the element should be at right angles to the line between you
and the transmitter. 

Presumably this is a pole-mounted external aerial. How long has it been in
place?

It’s possible that your coax feeder and/or termination at the dipole end
has corroded or is waterlogged or suffering some form of wind damage, not
an uncommon condition for aerials that have been in place for a few years.
Has the quality of the signal received deteriorated over time?

Can you receive the station of interest on a portable receiver having a
whip aerial? If so, is it noticeably noisier than the main setup? You will
probably need to move the radio about to get the best signal.


-- 
Spike

Back to uk.tech.broadcast | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-16 13:22 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-16 14:08 +0100
    Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:18 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. John Williamson <johnwilliamson@btinternet.com> - 2026-10-20 16:46 +0100
        Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:09 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:27 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-17 14:16 +0000
    Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-18 03:39 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. tony sayer <tony@bancom.co.uk> - 2026-10-18 20:57 +0100
    Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:23 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-20 16:05 +0000
        Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:10 +0100
          Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:32 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. Rink <rink.hof.haalditmaarweg@planet.nl> - 2026-11-09 15:24 +0100

csiph-web