Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > sci.electronics.design > #453322

Re: Parasitics?

Show all headers | View raw

On 19/03/2017 3:22 AM, rickman wrote:
> On 3/18/2017 9:33 AM, bloggs.fredbloggs.fred@gmail.com wrote:
>> On Saturday, March 18, 2017 at 5:45:07 AM UTC-4, rickman wrote:
>>> On 3/18/2017 4:36 AM, bloggs.fredbloggs.fred@gmail.com wrote:
>>>> On Friday, March 17, 2017 at 12:57:57 AM UTC-4, rickman wrote:
>>>>> On 3/16/2017 11:51 PM, Sylvia Else wrote:
>>>>>> On 17/03/2017 2:16 PM, rickman wrote:
>>>>>>> On 3/16/2017 9:21 PM, Sylvia Else wrote:
>>>>>>>> On 17/03/2017 10:44 AM, rickman wrote:
>>>>>>>>> I'm running a simulation where I'm pumping charge into a
>>>>>>>>> capacitor to
>>>>>>>>> generate a voltage.  A transistor emitter/source is connected
>>>>>>>>> to the
>>>>>>>>> positive rail and the collector/drain is connected to a 1 nF cap
>>>>>>>>> through
>>>>>>>>> a 47k resistor.  When the base/gate is driven high to shut off the
>>>>>>>>> current I see the current go up initially then taking almost 2
>>>>>>>>> us to
>>>>>>>>> shut off.  I've tried 2N3906 and BSS84 and a couple others
>>>>>>>>> selected
>>>>>>>>> randomly.  The switching period is around 8 uS.
>>>>>>>>>
>>>>>>>>> Is this from the parasitic capacitance in the transistor?  The
>>>>>>>>> BSS84
>>>>>>>>> only has 1 nC gate charge and still the effect is very pronounced.
>>>>>>>>>
>>>>>>>>> Is there a way to mitigate this effect other than using a
>>>>>>>>> larger cap
>>>>>>>>> and
>>>>>>>>> smaller resistors?
>>>>>>>>>
>>>>>>>> When you try to drive the gate high, the gate-drain capacitance
>>>>>>>> has to
>>>>>>>> be charged, and the only way than can happen is for current to flow
>>>>>>>> through R3. A back of the envelope calculation suggests that
>>>>>>>> will take
>>>>>>>> about the time you're seeing.
>>>>>>>>
>>>>>>>> To get it to switch more quickly, you need to reduce R3, or
>>>>>>>> provide some
>>>>>>>> other path for the current.
>>>>>>>>
>>>>>>>> A diode in series with R3, and a 1K resistor from the drain to
>>>>>>>> ground
>>>>>>>> improves things substantially.
>>>>>>>
>>>>>>> That actually makes things worse by substituting the capacitance
>>>>>>> of the
>>>>>>> diode through the 1k resistor for the capacitance of the transistor.
>>>>>>>
>>>>>>> I was trying to use a very low power approach by injecting charge
>>>>>>> onto a
>>>>>>> capacitor which would have a very low drain from it.  But if low
>>>>>>> value
>>>>>>> resistors have to be added, I can just use a dithered
>>>>>>> pullup/pulldown
>>>>>>> instead.  That may also have current injection, but it should be
>>>>>>> approximately equal in both directions because of the push-pull
>>>>>>> output.
>>>>>>>
>>>>>>
>>>>>> I had in mind this. The current through R3 reverses, then returns to
>>>>>> zero in 190ns.
>>>>>
>>>>> Yes, that's what I modeled.  I see large current spikes on both
>>>>> edges of
>>>>> the pulse.  Regardless, I won't be using a discrete transistor.
>>>>> I'll be
>>>>> using the output from an FPGA.  Depending on the pulse width of the
>>>>> output, the current in R2 is around 1 mA which is as much as the
>>>>> entire
>>>>> rest of the project.
>>>>>
>>>>> I can use a large resistor in series with the output into the cap and
>>>>> drive it high and low for a range of duty cycles.  That will get me
>>>>> what
>>>>> I need.  This circuit only needs to source voltage, so I thought it
>>>>> would use less current to only pull high.  We'll see what the real
>>>>> circuit does when I use the actual FPGA output.  It doesn't have to be
>>>>> perfectly linear with duty cycle, but it does need to at least be
>>>>> monotonic.
>>>>
>>>> Uh-huh, and what is the problem you can't simply drive this flea
>>>> power RC from the FPGA directly? You do know how an RC works? Right?
>>>
>>> I'm not sure what you are talking about.  I will be driving the RC
>>> directly from the FPGA output.
>>>
>>> I don't have FPGA outputs in the simulation, so I was using a FET as a
>>> model.  Since it appears there are issues with charge injection when
>>> driving a high impedance, I will just have to work that out on the
>>> bench.
>>
>> Huh? You think that circuit is representative of an FPGA CMOS output?
>> Don't think so...
>
> First order approximation, a FET.  I'm not going to try to model it more
> closely.  There's not much I can do with it other than vary the drive
> strenth/slew rate.  So as I said, I'll test it on the bench and see what
> I can get out of it.
>

The FPGA CMOS output is likely to be push-pull, which will make a big 
difference.

Sylvia.

Back to sci.electronics.design | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Parasitics? rickman <gnuarm@gmail.com> - 2017-03-16 19:44 -0400
  Re: Parasitics? bloggs.fredbloggs.fred@gmail.com - 2017-03-16 16:48 -0700
  Re: Parasitics? Sylvia Else <sylvia@not.at.this.address> - 2017-03-17 10:59 +1100
    Re: Parasitics? rickman <gnuarm@gmail.com> - 2017-03-16 20:19 -0400
  Re: Parasitics? Sylvia Else <sylvia@not.at.this.address> - 2017-03-17 12:21 +1100
    Re: Parasitics? rickman <gnuarm@gmail.com> - 2017-03-16 23:16 -0400
      Re: Parasitics? Sylvia Else <sylvia@not.at.this.address> - 2017-03-17 14:51 +1100
        Re: Parasitics? rickman <gnuarm@gmail.com> - 2017-03-17 00:57 -0400
          Re: Parasitics? bloggs.fredbloggs.fred@gmail.com - 2017-03-18 01:36 -0700
            Re: Parasitics? rickman <gnuarm@gmail.com> - 2017-03-18 05:45 -0400
              Re: Parasitics? bloggs.fredbloggs.fred@gmail.com - 2017-03-18 06:33 -0700
                Re: Parasitics? rickman <gnuarm@gmail.com> - 2017-03-18 12:22 -0400
                Re: Parasitics? Sylvia Else <sylvia@not.at.this.address> - 2017-03-24 13:30 +1100
                Re: Parasitics? rickman <gnuarm@gmail.com> - 2017-03-24 00:36 -0400
                Re: Parasitics? Sylvia Else <sylvia@not.at.this.address> - 2017-03-24 16:10 +1100
  Re: Parasitics? "Tim Williams" <tiwill@seventransistorlabs.com> - 2017-03-17 01:42 -0500
    Re: Parasitics? rickman <gnuarm@gmail.com> - 2017-03-17 04:11 -0400
  Re: Parasitics? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-03-17 09:53 -0400
    Re: Parasitics? Cursitor Doom <curd@notformail.com> - 2017-03-17 18:52 +0000

csiph-web