Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1699698 > unrolled thread

[PATCH v5 0/7] Add support for IPQ8074 PCIe phy and controller

Back to article view | Back to linux.kernel

Contents

  [PATCH v5 0/7] Add support for IPQ8074 PCIe phy and controller Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
    [PATCH v5 1/7] dt-bindings: phy: qmp: Add output-clock-names Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
    [PATCH v5 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
      Re: [PATCH v5 2/7] dt-bindings: phy: qmp: Add support for QMP phy in  IPQ8074 Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-07-31 08:00 +0200
    [PATCH v5 4/7] phy: qcom-qmp: Add support for IPQ8074 Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
    [PATCH v5 6/7] dt-bindings: pci: qcom: Add support for IPQ8074 Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
    [PATCH v5 3/7] phy: qcom-qmp: Fix phy pipe clock name Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
      Re: [PATCH v5 3/7] phy: qcom-qmp: Fix phy pipe clock name Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-07-31 08:00 +0200
    [PATCH v5 5/7] PCI: dwc: qcom: Use block IP version for operations Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200

#1699698 — [PATCH v5 0/7] Add support for IPQ8074 PCIe phy and controller

v5:
  dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
        Renamed phy_phy clock as common clock

  phy: qcom-qmp: Fix phy pipe clock name
        Moved the DT get into the registering function

  phy: qcom-qmp: Add support for IPQ8074
        Place the IPQ8074 related structs similar to existing SoC.
        Renamed phy_phy clock as common clock
v4:
  phy: qcom-qmp: Fix phy pipe clock name
	Based on Vivek's comments, return failure only for
	PCI/USB type of phys.
	Removed Ack.

  phy: qcom-qmp: Handle unavailable registers
	Removed this patch.
	Incorrectly used a block of code that is not applicable
	to IPQ8074, hence had to avoid an "unavailable" register.
	Since that is addressed using 'has_phy_com_ctrl' this
	patch is not needed.

  phy: qcom-qmp: Add support for IPQ8074
	Set 'has_phy_com_ctrl' to false
	Remove ipq8074_pciephy_regs_layout

v3:
  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
	Incoporate Stan's feedback:-
	 - Add SoC Wrapper and Synopsys Core IP versions

v2:
  dt-bindings: phy: qmp: Add output-clock-names
	Added Rob H's Ack

  dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
	Removed example
	Added IPQ8074 specific details

  phy: qcom-qmp: Fix phy pipe clock name
	Added Vivek's Ack

  phy: qcom-qmp: Handle unavailable registers
	No changes

  phy: qcom-qmp: Add support for IPQ8074
	No changes

  PCI: dwc: qcom: Use block IP version for operations
	Added new patch to use block IP version instead of v1, v2...

  dt-bindings: pci: qcom: Add support for IPQ8074
	Removed example
	Added IPQ8074 specific details

  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
	Incorporated Bjorn's feedback:-
	 - Removed reset names, helper function to assert/deassert, helper
	   function to R/M/W register.
	 - Renamed sys_noc clock as iface clock
	 - Added deinit if phy power on fails

v1:
Add definitions required to enable QMP phy support for IPQ8074.

Add support for the IPQ8074 PCIe controller.  IPQ8074 supports
Gen 1/2, one lane, two PCIe root complex with support for MSI and
legacy interrupts, and it conforms to PCI Express Base 2.1
specification.

Varadarajan Narayanan (7):
  dt-bindings: phy: qmp: Add output-clock-names
  dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
  phy: qcom-qmp: Fix phy pipe clock name
  phy: qcom-qmp: Add support for IPQ8074
  PCI: dwc: qcom: Use block IP version for operations
  dt-bindings: pci: qcom: Add support for IPQ8074
  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

 .../devicetree/bindings/pci/qcom,pcie.txt          |  23 ++
 .../devicetree/bindings/phy/qcom-qmp-phy.txt       |  11 +
 drivers/pci/dwc/pcie-qcom.c                        | 378 +++++++++++++++++----
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 152 ++++++++-
 4 files changed, 488 insertions(+), 76 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [next] | [standalone]

#1699701 — [PATCH v5 1/7] dt-bindings: phy: qmp: Add output-clock-names

The phy outputs a clock that will act as the parent for
the phy's pipe clock. Add the name of this clock to the
lane's DT node.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index e11c563..5d7a51f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -60,6 +60,8 @@ Required properties for child node:
 	   one for each entry in clock-names.
  - clock-names: Must contain following for pcie and usb qmp phys:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
+ - clock-output-names: Name of the phy clock that will be the parent for
+		       the above pipe clock.
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -96,6 +98,7 @@ Example:
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "pipe0";
+			clock-output-names = "pcie_0_pipe_clk_src";
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "lane0";
 		};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1699702 — [PATCH v5 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074

IPQ8074 uses QMP phy controller that provides support to PCIe and
USB. Adding dt binding information for the same.

Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index 5d7a51f..802af1b 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
 Required properties:
  - compatible: compatible list, contains:
+	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
 	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
 
@@ -38,6 +39,8 @@ Required properties:
 		 "phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
 		 "phy", "common".
+		For "qcom,ipq8074-qmp-pcie-phy" must contain:
+		 "phy", "common".
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -63,6 +66,11 @@ Required properties for child node:
  - clock-output-names: Name of the phy clock that will be the parent for
 		       the above pipe clock.
 
+	For "qcom,ipq8074-qmp-pcie-phy":
+		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
+			(or)
+		  "pcie20_phy1_pipe_clk"
+
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
  - reset-names: Must contain following for pcie qmp phys:
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1699716 — Re: [PATCH v5 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074

On 07/31/2017 11:09 AM, Varadarajan Narayanan wrote:
> IPQ8074 uses QMP phy controller that provides support to PCIe and
> USB. Adding dt binding information for the same.
>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---

Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>

>   Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index 5d7a51f..802af1b 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
>   
>   Required properties:
>    - compatible: compatible list, contains:
> +	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
>   	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
>   	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
>   
> @@ -38,6 +39,8 @@ Required properties:
>   		 "phy", "common", "cfg".
>   		For "qcom,msm8996-qmp-usb3-phy" must contain
>   		 "phy", "common".
> +		For "qcom,ipq8074-qmp-pcie-phy" must contain:
> +		 "phy", "common".
>   
>    - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
>    - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
> @@ -63,6 +66,11 @@ Required properties for child node:
>    - clock-output-names: Name of the phy clock that will be the parent for
>   		       the above pipe clock.
>   
> +	For "qcom,ipq8074-qmp-pcie-phy":
> +		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
> +			(or)
> +		  "pcie20_phy1_pipe_clk"
> +
>    - resets: a list of phandles and reset controller specifier pairs,
>   	   one for each entry in reset-names.
>    - reset-names: Must contain following for pcie qmp phys:

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[toc] | [prev] | [next] | [standalone]

#1699704 — [PATCH v5 4/7] phy: qcom-qmp: Add support for IPQ8074

Add definitions required to enable QMP phy support for IPQ8074.

Signed-off-by: smuthayy <smuthayy@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 124 ++++++++++++++++++++++++++++++++++++
 1 file changed, 124 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 464049c..136d236 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -59,6 +59,7 @@
 #define QSERDES_COM_PLL_RCTRL_MODE1			0x088
 #define QSERDES_COM_PLL_CCTRL_MODE0			0x090
 #define QSERDES_COM_PLL_CCTRL_MODE1			0x094
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM			0x0a8
 #define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
 #define QSERDES_COM_RESETSM_CNTRL			0x0b4
 #define QSERDES_COM_RESTRIM_CTRL			0x0bc
@@ -143,6 +144,11 @@
 #define QPHY_LOCK_DETECT_CONFIG3			0x88
 #define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK		0xa0
 #define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK			0xa4
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB		0x1A8
+#define QPHY_OSC_DTCT_ACTIONS				0x1AC
+#define QPHY_RX_SIGDET_LVL				0x1D8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
 
 /* QPHY_SW_RESET bit */
 #define SW_RESET				BIT(0)
@@ -382,6 +388,85 @@ enum qphy_reg_layout {
 	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
 };
 
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+	QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+	QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+	QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+	QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+	QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
 	/* phy-type - PCIE/UFS/USB */
@@ -580,6 +665,42 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.mask_pcs_ready		= PHYSTATUS,
 };
 
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+	"phy", "common",
+};
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+	.type			= PHY_TYPE_PCIE,
+	.nlanes			= 1,
+
+	.serdes_tbl		= ipq8074_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+	.tx_tbl			= ipq8074_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+	.rx_tbl			= ipq8074_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+	.pcs_tbl		= ipq8074_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+	.clk_list		= NULL,
+	.num_clks		= 0,
+	.reset_list		= ipq8074_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(ipq8074_pciephy_reset_l),
+	.vreg_list		= NULL,
+	.num_vregs		= 0,
+	.regs			= pciephy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.mask_pcs_ready		= PHYSTATUS,
+
+	.has_phy_com_ctrl	= false,
+	.has_lane_rst		= false,
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= 995,		/* us */
+	.pwrdn_delay_max	= 1005,		/* us */
+};
+
 static void qcom_qmp_phy_configure(void __iomem *base,
 				   const unsigned int *regs,
 				   const struct qmp_phy_init_tbl tbl[],
@@ -1048,6 +1169,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,ipq8074-qmp-pcie-phy",
+		.data = &ipq8074_pciephy_cfg,
 	},
 	{ },
 };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1699705 — [PATCH v5 6/7] dt-bindings: pci: qcom: Add support for IPQ8074

Add support for the IPQ8074 PCIe controller.  IPQ8074 supports Gen 1/2, one
lane, two PCIe root complex with support for MSI and legacy interrupts, and
it conforms to PCI Express Base 2.1 specification.

Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 .../devicetree/bindings/pci/qcom,pcie.txt          | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 9d418b7..b3e36ef 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -9,6 +9,7 @@
 			- "qcom,pcie-apq8084" for apq8084
 			- "qcom,pcie-msm8996" for msm8996 or apq8096
 			- "qcom,pcie-ipq4019" for ipq4019
+			- "qcom,pcie-ipq8074" for ipq8074
 
 - reg:
 	Usage: required
@@ -105,6 +106,16 @@
 			- "bus_master"	Master AXI clock
 			- "bus_slave"	Slave AXI clock
 
+- clock-names:
+	Usage: required for ipq8074
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "iface"	PCIe to SysNOC BIU clock
+			- "axi_m"	AXI Master clock
+			- "axi_s"	AXI Slave clock
+			- "ahb"		AHB clock
+			- "aux"		Auxiliary clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>
@@ -144,6 +155,18 @@
 			- "ahb"			AHB reset
 			- "phy_ahb"		PHY AHB reset
 
+- reset-names:
+	Usage: required for ipq8074
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "pipe"		PIPE reset
+			- "sleep"		Sleep reset
+			- "sticky"		Core Sticky reset
+			- "axi_m"		AXI Master reset
+			- "axi_s"		AXI Slave reset
+			- "ahb"			AHB Reset
+			- "axi_m_sticky"	AXI Master Sticky reset
+
 - power-domains:
 	Usage: required for apq8084 and msm8996/apq8096
 	Value type: <prop-encoded-array>
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1699706 — [PATCH v5 3/7] phy: qcom-qmp: Fix phy pipe clock name

Presently, the phy pipe clock's name is assumed to be either
usb3_phy_pipe_clk_src or pcie_XX_pipe_clk_src (where XX is the
phy lane's number). However, this will not work if an SoC has
more than one instance of the phy. Hence, instead of assuming
the name of the clock, fetch it from the DT.

Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 78ca628..464049c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -925,29 +925,28 @@ static int qcom_qmp_phy_clk_init(struct device *dev)
  *    clk  |   +-------+   |                   +-----+
  *         +---------------+
  */
-static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
+static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 {
-	char name[24];
 	struct clk_fixed_rate *fixed;
 	struct clk_init_data init = { };
+	int ret;
 
-	switch (qmp->cfg->type) {
-	case PHY_TYPE_USB3:
-		snprintf(name, sizeof(name), "usb3_phy_pipe_clk_src");
-		break;
-	case PHY_TYPE_PCIE:
-		snprintf(name, sizeof(name), "pcie_%d_pipe_clk_src", id);
-		break;
-	default:
+	if ((qmp->cfg->type != PHY_TYPE_USB3) &&
+	    (qmp->cfg->type != PHY_TYPE_PCIE)) {
 		/* not all phys register pipe clocks, so return success */
 		return 0;
 	}
 
+	ret = of_property_read_string(np, "clock-output-names", &init.name);
+	if (ret) {
+		dev_err(qmp->dev, "%s: No clock-output-names\n", np->name);
+		return ret;
+	}
+
 	fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
 	if (!fixed)
 		return -ENOMEM;
 
-	init.name = name;
 	init.ops = &clk_fixed_rate_ops;
 
 	/* controllers using QMP phys use 125MHz pipe clock interface */
@@ -1110,6 +1109,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 
 	id = 0;
 	for_each_available_child_of_node(dev->of_node, child) {
+
 		/* Create per-lane phy */
 		ret = qcom_qmp_phy_create(dev, child, id);
 		if (ret) {
@@ -1119,10 +1119,10 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
 		}
 
 		/*
-		 * Register the pipe clock provided by phy.
-		 * See function description to see details of this pipe clock.
+		 * Register the pipe clock provided by phy. See function
+		 * description to see details of this pipe clock.
 		 */
-		ret = phy_pipe_clk_register(qmp, id);
+		ret = phy_pipe_clk_register(qmp, child);
 		if (ret) {
 			dev_err(qmp->dev,
 				"failed to register pipe clock source\n");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1699712 — Re: [PATCH v5 3/7] phy: qcom-qmp: Fix phy pipe clock name

Hi,


On 07/31/2017 11:09 AM, Varadarajan Narayanan wrote:
> Presently, the phy pipe clock's name is assumed to be either
> usb3_phy_pipe_clk_src or pcie_XX_pipe_clk_src (where XX is the
> phy lane's number). However, this will not work if an SoC has
> more than one instance of the phy. Hence, instead of assuming
> the name of the clock, fetch it from the DT.
>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp.c | 28 ++++++++++++++--------------
>   1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 78ca628..464049c 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -925,29 +925,28 @@ static int qcom_qmp_phy_clk_init(struct device *dev)
>    *    clk  |   +-------+   |                   +-----+
>    *         +---------------+
>    */
> -static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
>   {
> -	char name[24];
>   	struct clk_fixed_rate *fixed;
>   	struct clk_init_data init = { };
> +	int ret;
>   
> -	switch (qmp->cfg->type) {
> -	case PHY_TYPE_USB3:
> -		snprintf(name, sizeof(name), "usb3_phy_pipe_clk_src");
> -		break;
> -	case PHY_TYPE_PCIE:
> -		snprintf(name, sizeof(name), "pcie_%d_pipe_clk_src", id);
> -		break;
> -	default:
> +	if ((qmp->cfg->type != PHY_TYPE_USB3) &&
> +	    (qmp->cfg->type != PHY_TYPE_PCIE)) {
>   		/* not all phys register pipe clocks, so return success */
>   		return 0;
>   	}
>   
> +	ret = of_property_read_string(np, "clock-output-names", &init.name);
> +	if (ret) {
> +		dev_err(qmp->dev, "%s: No clock-output-names\n", np->name);
> +		return ret;
> +	}
> +
>   	fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
>   	if (!fixed)
>   		return -ENOMEM;
>   
> -	init.name = name;
>   	init.ops = &clk_fixed_rate_ops;
>   
>   	/* controllers using QMP phys use 125MHz pipe clock interface */
> @@ -1110,6 +1109,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
>   
>   	id = 0;
>   	for_each_available_child_of_node(dev->of_node, child) {
> +
Minor nits - this extra line not needed.

>   		/* Create per-lane phy */
>   		ret = qcom_qmp_phy_create(dev, child, id);
>   		if (ret) {
> @@ -1119,10 +1119,10 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
>   		}
>   
>   		/*
> -		 * Register the pipe clock provided by phy.
> -		 * See function description to see details of this pipe clock.
> +		 * Register the pipe clock provided by phy. See function
> +		 * description to see details of this pipe clock.

Is there some whitespace fixed here? Otherwise unnecessary hunk.

With these minor nits fixed,

Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>

>   		 */
> -		ret = phy_pipe_clk_register(qmp, id);
> +		ret = phy_pipe_clk_register(qmp, child);
>   		if (ret) {
>   			dev_err(qmp->dev,
>   				"failed to register pipe clock source\n");

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[toc] | [prev] | [next] | [standalone]

#1699707 — [PATCH v5 5/7] PCI: dwc: qcom: Use block IP version for operations

Presently, when support for a new SoC is added, the driver ops
structures and functions are versioned with plain 1, 2, 3 etc.
Instead use the block IP version number.

Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/pci/dwc/pcie-qcom.c | 133 +++++++++++++++++++++++---------------------
 1 file changed, 71 insertions(+), 62 deletions(-)

diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index d15657d..6525f2f 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -61,7 +61,7 @@
 
 #define PERST_DELAY_US				1000
 
-struct qcom_pcie_resources_v0 {
+struct qcom_pcie_resources_2_1_0 {
 	struct clk *iface_clk;
 	struct clk *core_clk;
 	struct clk *phy_clk;
@@ -75,7 +75,7 @@ struct qcom_pcie_resources_v0 {
 	struct regulator *vdda_refclk;
 };
 
-struct qcom_pcie_resources_v1 {
+struct qcom_pcie_resources_1_0_0 {
 	struct clk *iface;
 	struct clk *aux;
 	struct clk *master_bus;
@@ -84,7 +84,7 @@ struct qcom_pcie_resources_v1 {
 	struct regulator *vdda;
 };
 
-struct qcom_pcie_resources_v2 {
+struct qcom_pcie_resources_2_3_2 {
 	struct clk *aux_clk;
 	struct clk *master_clk;
 	struct clk *slave_clk;
@@ -92,7 +92,7 @@ struct qcom_pcie_resources_v2 {
 	struct clk *pipe_clk;
 };
 
-struct qcom_pcie_resources_v3 {
+struct qcom_pcie_resources_2_4_0 {
 	struct clk *aux_clk;
 	struct clk *master_clk;
 	struct clk *slave_clk;
@@ -111,10 +111,10 @@ struct qcom_pcie_resources_v3 {
 };
 
 union qcom_pcie_resources {
-	struct qcom_pcie_resources_v0 v0;
-	struct qcom_pcie_resources_v1 v1;
-	struct qcom_pcie_resources_v2 v2;
-	struct qcom_pcie_resources_v3 v3;
+	struct qcom_pcie_resources_1_0_0 v1_0_0;
+	struct qcom_pcie_resources_2_1_0 v2_1_0;
+	struct qcom_pcie_resources_2_3_2 v2_3_2;
+	struct qcom_pcie_resources_2_4_0 v2_4_0;
 };
 
 struct qcom_pcie;
@@ -172,7 +172,7 @@ static int qcom_pcie_establish_link(struct qcom_pcie *pcie)
 	return dw_pcie_wait_for_link(pci);
 }
 
-static void qcom_pcie_v0_v1_ltssm_enable(struct qcom_pcie *pcie)
+static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
 
@@ -182,9 +182,9 @@ static void qcom_pcie_v0_v1_ltssm_enable(struct qcom_pcie *pcie)
 	writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
 }
 
-static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -232,9 +232,9 @@ static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
 	return PTR_ERR_OR_ZERO(res->phy_reset);
 }
 
-static void qcom_pcie_deinit_v0(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 
 	reset_control_assert(res->pci_reset);
 	reset_control_assert(res->axi_reset);
@@ -249,9 +249,9 @@ static void qcom_pcie_deinit_v0(struct qcom_pcie *pcie)
 	regulator_disable(res->vdda_refclk);
 }
 
-static int qcom_pcie_init_v0(struct qcom_pcie *pcie)
+static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	u32 val;
@@ -367,9 +367,9 @@ static int qcom_pcie_init_v0(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -397,9 +397,9 @@ static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
 	return PTR_ERR_OR_ZERO(res->core);
 }
 
-static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
 
 	reset_control_assert(res->core);
 	clk_disable_unprepare(res->slave_bus);
@@ -409,9 +409,9 @@ static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie)
 	regulator_disable(res->vdda);
 }
 
-static int qcom_pcie_init_v1(struct qcom_pcie *pcie)
+static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	int ret;
@@ -477,7 +477,7 @@ static int qcom_pcie_init_v1(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static void qcom_pcie_v2_ltssm_enable(struct qcom_pcie *pcie)
+static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
 
@@ -487,9 +487,9 @@ static void qcom_pcie_v2_ltssm_enable(struct qcom_pcie *pcie)
 	writel(val, pcie->parf + PCIE20_PARF_LTSSM);
 }
 
-static int qcom_pcie_get_resources_v2(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -513,9 +513,9 @@ static int qcom_pcie_get_resources_v2(struct qcom_pcie *pcie)
 	return PTR_ERR_OR_ZERO(res->pipe_clk);
 }
 
-static void qcom_pcie_deinit_v2(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 
 	clk_disable_unprepare(res->pipe_clk);
 	clk_disable_unprepare(res->slave_clk);
@@ -524,9 +524,9 @@ static void qcom_pcie_deinit_v2(struct qcom_pcie *pcie)
 	clk_disable_unprepare(res->aux_clk);
 }
 
-static int qcom_pcie_init_v2(struct qcom_pcie *pcie)
+static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	u32 val;
@@ -589,9 +589,9 @@ static int qcom_pcie_init_v2(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static int qcom_pcie_post_init_v2(struct qcom_pcie *pcie)
+static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	int ret;
@@ -605,9 +605,9 @@ static int qcom_pcie_post_init_v2(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static int qcom_pcie_get_resources_v3(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v3 *res = &pcie->res.v3;
+	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -674,9 +674,9 @@ static int qcom_pcie_get_resources_v3(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static void qcom_pcie_deinit_v3(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v3 *res = &pcie->res.v3;
+	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
 
 	reset_control_assert(res->axi_m_reset);
 	reset_control_assert(res->axi_s_reset);
@@ -692,9 +692,9 @@ static void qcom_pcie_deinit_v3(struct qcom_pcie *pcie)
 	clk_disable_unprepare(res->slave_clk);
 }
 
-static int qcom_pcie_init_v3(struct qcom_pcie *pcie)
+static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v3 *res = &pcie->res.v3;
+	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	u32 val;
@@ -952,37 +952,37 @@ static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
 	.rd_own_conf = qcom_pcie_rd_own_conf,
 };
 
-static const struct qcom_pcie_ops ops_v0 = {
-	.get_resources = qcom_pcie_get_resources_v0,
-	.init = qcom_pcie_init_v0,
-	.deinit = qcom_pcie_deinit_v0,
-	.ltssm_enable = qcom_pcie_v0_v1_ltssm_enable,
+static const struct qcom_pcie_ops ops_2_1_0 = {
+	.get_resources = qcom_pcie_get_resources_2_1_0,
+	.init = qcom_pcie_init_2_1_0,
+	.deinit = qcom_pcie_deinit_2_1_0,
+	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
 };
 
-static const struct qcom_pcie_ops ops_v1 = {
-	.get_resources = qcom_pcie_get_resources_v1,
-	.init = qcom_pcie_init_v1,
-	.deinit = qcom_pcie_deinit_v1,
-	.ltssm_enable = qcom_pcie_v0_v1_ltssm_enable,
+static const struct qcom_pcie_ops ops_1_0_0 = {
+	.get_resources = qcom_pcie_get_resources_1_0_0,
+	.init = qcom_pcie_init_1_0_0,
+	.deinit = qcom_pcie_deinit_1_0_0,
+	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
 };
 
-static const struct qcom_pcie_ops ops_v2 = {
-	.get_resources = qcom_pcie_get_resources_v2,
-	.init = qcom_pcie_init_v2,
-	.post_init = qcom_pcie_post_init_v2,
-	.deinit = qcom_pcie_deinit_v2,
-	.ltssm_enable = qcom_pcie_v2_ltssm_enable,
+static const struct qcom_pcie_ops ops_2_3_2 = {
+	.get_resources = qcom_pcie_get_resources_2_3_2,
+	.init = qcom_pcie_init_2_3_2,
+	.post_init = qcom_pcie_post_init_2_3_2,
+	.deinit = qcom_pcie_deinit_2_3_2,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = qcom_pcie_link_up,
 };
 
-static const struct qcom_pcie_ops ops_v3 = {
-	.get_resources = qcom_pcie_get_resources_v3,
-	.init = qcom_pcie_init_v3,
-	.deinit = qcom_pcie_deinit_v3,
-	.ltssm_enable = qcom_pcie_v2_ltssm_enable,
+static const struct qcom_pcie_ops ops_2_4_0 = {
+	.get_resources = qcom_pcie_get_resources_2_4_0,
+	.init = qcom_pcie_init_2_4_0,
+	.deinit = qcom_pcie_deinit_2_4_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
 static int qcom_pcie_probe(struct platform_device *pdev)
@@ -1070,12 +1070,21 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	return 0;
 }
 
+/*
+ * Declare one of_device_id entry
+ * c - Compatible string
+ * d - Associated data
+ * w - SoC wrapper version (ignored)
+ * s - Synopsys core version (ignored)
+ */
+#define QCOM_DECL(c, d, w, s) { .compatible = c, .data = &d }
+
 static const struct of_device_id qcom_pcie_match[] = {
-	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_v0 },
-	{ .compatible = "qcom,pcie-apq8064", .data = &ops_v0 },
-	{ .compatible = "qcom,pcie-apq8084", .data = &ops_v1 },
-	{ .compatible = "qcom,pcie-msm8996", .data = &ops_v2 },
-	{ .compatible = "qcom,pcie-ipq4019", .data = &ops_v3 },
+	QCOM_DECL("qcom,pcie-apq8084", ops_1_0_0, 1.0.0, 4.11a),
+	QCOM_DECL("qcom,pcie-ipq8064", ops_2_1_0, 2.1.0, 4.01a),
+	QCOM_DECL("qcom,pcie-apq8064", ops_2_1_0, 2.1.0, 4.01a),
+	QCOM_DECL("qcom,pcie-msm8996", ops_2_3_2, 2.3.2, 4.21a),
+	QCOM_DECL("qcom,pcie-ipq4019", ops_2_4_0, 2.4.0, 4.20a),
 	{ }
 };
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web