Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1699712

Re: [PATCH v5 3/7] phy: qcom-qmp: Fix phy pipe clock name

Show all headers | View raw

Hi,


On 07/31/2017 11:09 AM, Varadarajan Narayanan wrote:
> Presently, the phy pipe clock's name is assumed to be either
> usb3_phy_pipe_clk_src or pcie_XX_pipe_clk_src (where XX is the
> phy lane's number). However, this will not work if an SoC has
> more than one instance of the phy. Hence, instead of assuming
> the name of the clock, fetch it from the DT.
>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp.c | 28 ++++++++++++++--------------
>   1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 78ca628..464049c 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -925,29 +925,28 @@ static int qcom_qmp_phy_clk_init(struct device *dev)
>    *    clk  |   +-------+   |                   +-----+
>    *         +---------------+
>    */
> -static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
> +static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
>   {
> -	char name[24];
>   	struct clk_fixed_rate *fixed;
>   	struct clk_init_data init = { };
> +	int ret;
>   
> -	switch (qmp->cfg->type) {
> -	case PHY_TYPE_USB3:
> -		snprintf(name, sizeof(name), "usb3_phy_pipe_clk_src");
> -		break;
> -	case PHY_TYPE_PCIE:
> -		snprintf(name, sizeof(name), "pcie_%d_pipe_clk_src", id);
> -		break;
> -	default:
> +	if ((qmp->cfg->type != PHY_TYPE_USB3) &&
> +	    (qmp->cfg->type != PHY_TYPE_PCIE)) {
>   		/* not all phys register pipe clocks, so return success */
>   		return 0;
>   	}
>   
> +	ret = of_property_read_string(np, "clock-output-names", &init.name);
> +	if (ret) {
> +		dev_err(qmp->dev, "%s: No clock-output-names\n", np->name);
> +		return ret;
> +	}
> +
>   	fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL);
>   	if (!fixed)
>   		return -ENOMEM;
>   
> -	init.name = name;
>   	init.ops = &clk_fixed_rate_ops;
>   
>   	/* controllers using QMP phys use 125MHz pipe clock interface */
> @@ -1110,6 +1109,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
>   
>   	id = 0;
>   	for_each_available_child_of_node(dev->of_node, child) {
> +
Minor nits - this extra line not needed.

>   		/* Create per-lane phy */
>   		ret = qcom_qmp_phy_create(dev, child, id);
>   		if (ret) {
> @@ -1119,10 +1119,10 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
>   		}
>   
>   		/*
> -		 * Register the pipe clock provided by phy.
> -		 * See function description to see details of this pipe clock.
> +		 * Register the pipe clock provided by phy. See function
> +		 * description to see details of this pipe clock.

Is there some whitespace fixed here? Otherwise unnecessary hunk.

With these minor nits fixed,

Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>

>   		 */
> -		ret = phy_pipe_clk_register(qmp, id);
> +		ret = phy_pipe_clk_register(qmp, child);
>   		if (ret) {
>   			dev_err(qmp->dev,
>   				"failed to register pipe clock source\n");

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v5 0/7] Add support for IPQ8074 PCIe phy and controller Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
  [PATCH v5 1/7] dt-bindings: phy: qmp: Add output-clock-names Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
  [PATCH v5 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074 Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
    Re: [PATCH v5 2/7] dt-bindings: phy: qmp: Add support for QMP phy in  IPQ8074 Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-07-31 08:00 +0200
  [PATCH v5 4/7] phy: qcom-qmp: Add support for IPQ8074 Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
  [PATCH v5 6/7] dt-bindings: pci: qcom: Add support for IPQ8074 Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
  [PATCH v5 3/7] phy: qcom-qmp: Fix phy pipe clock name Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200
    Re: [PATCH v5 3/7] phy: qcom-qmp: Fix phy pipe clock name Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-07-31 08:00 +0200
  [PATCH v5 5/7] PCI: dwc: qcom: Use block IP version for operations Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 07:50 +0200

csiph-web