Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1686553 > unrolled thread

[PATCH 00/18] drm/sun4i: Allwinner MIPI-DSI support

Back to article view | Back to linux.kernel

Contents

  [PATCH 00/18] drm/sun4i: Allwinner MIPI-DSI support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
    [PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable the TCON Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable  the TCON Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:50 +0200
    [PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200
        Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
    [PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Andrzej Hajda <a.hajda@samsung.com> - 2017-07-14 11:30 +0200
    [PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
    [PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the  TCON mode Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
    [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup kbuild test robot <lkp@intel.com> - 2017-07-14 12:00 +0200
      Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Chen-Yu Tsai <wens@csie.org> - 2017-07-18 05:50 +0200
    [PATCH 16/18] arm: dts: sun8i: a33: Add the DSI-related nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
    [PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:20 +0200
    [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:50 +0200
        Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
    [PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Chen-Yu Tsai <wens@csie.org> - 2017-07-14 10:00 +0200
    [PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Mark Brown <broonie@kernel.org> - 2017-07-13 18:10 +0200
        Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
    [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:10 +0200
        Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
    [PATCH 18/18] [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
    [PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
      Re: [PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200

Page 2 of 2 — ← Prev page 1 [2]

#1688785 — Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS

[Multipart message — attachments visible in raw view] — view raw

On Fri, Jul 14, 2017 at 12:40:19PM +0800, Chen-Yu Tsai wrote:
> On Thu, Jul 13, 2017 at 10:13 PM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > The Bananapi M2-Magic is a board with an A33, a USB host and USB OTG
> > connectors, and 8GB eMMC, an AP6212 WiFi/Bluetooth chip and connectors for
> > DSI, CSI and GPIOs.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> 
> Reviewed-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!

> Has BPI publicly released the schematics and/or FEX file yet?

I don't think they did yet.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[toc] | [prev] | [next] | [standalone]

#1686565 — [PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting

Huarui Lighting makes display panel, add it to the list of panels.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index afbb47ce50dd..cc5850a325f8 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -142,6 +142,7 @@ holt	Holt Integrated Circuits, Inc.
 honeywell	Honeywell
 hp	Hewlett Packard
 holtek	Holtek Semiconductor, Inc.
+huarui	Huarui Lighting Co. Ltd
 hwacom	HwaCom Systems Inc.
 i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
-- 
git-series 0.9.1

[toc] | [prev] | [next] | [standalone]

#1687131 — Re: [PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting

On Thu, Jul 13, 2017 at 10:13 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Huarui Lighting makes display panel, add it to the list of panels.

I could not find any information on "Huarui Lighting" within the
context of LCD panels. The company I found makes LED lighting
fixtures, floodlights, and high power LED drivers.

This might not be a legitimate branding?

ChenYu

>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index afbb47ce50dd..cc5850a325f8 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -142,6 +142,7 @@ holt        Holt Integrated Circuits, Inc.
>  honeywell      Honeywell
>  hp     Hewlett Packard
>  holtek Holtek Semiconductor, Inc.
> +huarui Huarui Lighting Co. Ltd
>  hwacom HwaCom Systems Inc.
>  i2se   I2SE GmbH
>  ibm    International Business Machines (IBM)
> --
> git-series 0.9.1

[toc] | [prev] | [next] | [standalone]

#1686566 — [PATCH 01/18] regmap: mmio: Add function to attach a clock

regmap_init_mmio_clk allows to specify a clock that needs to be enabled
while accessing the registers.

However, that clock is retrieved through its clock ID, which means it will
lookup that clock based on the current device that registers the regmap,
and, in the DT case, will only look in that device OF node.

This might be problematic if the clock to enable is stored in another node.
Let's add a function that allows to attach a clock that has already been
retrieved to a regmap in order to fix this.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/base/regmap/regmap-mmio.c | 24 ++++++++++++++++++++++++
 include/linux/regmap.h            |  4 ++++
 2 files changed, 28 insertions(+)

diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c
index 5189fd6182f6..5cadfd3394d8 100644
--- a/drivers/base/regmap/regmap-mmio.c
+++ b/drivers/base/regmap/regmap-mmio.c
@@ -28,6 +28,8 @@
 struct regmap_mmio_context {
 	void __iomem *regs;
 	unsigned val_bytes;
+
+	bool attached_clk;
 	struct clk *clk;
 
 	void (*reg_write)(struct regmap_mmio_context *ctx,
@@ -363,4 +365,26 @@ struct regmap *__devm_regmap_init_mmio_clk(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(__devm_regmap_init_mmio_clk);
 
+int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk)
+{
+	struct regmap_mmio_context *ctx = map->bus_context;
+
+	ctx->clk = clk;
+	ctx->attached_clk = true;
+
+	return clk_prepare(ctx->clk);
+}
+EXPORT_SYMBOL_GPL(regmap_mmio_attach_clk);
+
+void regmap_mmio_detach_clk(struct regmap *map)
+{
+	struct regmap_mmio_context *ctx = map->bus_context;
+
+	clk_unprepare(ctx->clk);
+
+	ctx->attached_clk = false;
+	ctx->clk = NULL;
+}
+EXPORT_SYMBOL_GPL(regmap_mmio_detach_clk);
+
 MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 978abfbac617..11a292a76586 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -21,6 +21,7 @@
 #include <linux/lockdep.h>
 
 struct module;
+struct clk;
 struct device;
 struct i2c_client;
 struct irq_domain;
@@ -789,6 +790,9 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
 	__regmap_lockdep_wrapper(__devm_regmap_init_ac97, #config,	\
 				ac97, config)
 
+int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk);
+void regmap_mmio_detach_clk(struct regmap *map);
+
 void regmap_exit(struct regmap *map);
 int regmap_reinit_cache(struct regmap *map,
 			const struct regmap_config *config);
-- 
git-series 0.9.1

[toc] | [prev] | [next] | [standalone]

#1686742 — Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock

[Multipart message — attachments visible in raw view] — view raw

On Thu, Jul 13, 2017 at 04:12:56PM +0200, Maxime Ripard wrote:

> This might be problematic if the clock to enable is stored in another node.
> Let's add a function that allows to attach a clock that has already been
> retrieved to a regmap in order to fix this.

What is the use case for this?

[toc] | [prev] | [next] | [standalone]

#1688792 — Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock

[Multipart message — attachments visible in raw view] — view raw

Hi Mark,

On Thu, Jul 13, 2017 at 05:01:42PM +0100, Mark Brown wrote:
> On Thu, Jul 13, 2017 at 04:12:56PM +0200, Maxime Ripard wrote:
> 
> > This might be problematic if the clock to enable is stored in another node.
> > Let's add a function that allows to attach a clock that has already been
> > retrieved to a regmap in order to fix this.
> 
> What is the use case for this?

This is useful when the clock you want to be handled by the regmap is
not described in the device node that probed the driver, but one of
its subnode, or an another node entirely.

We're in the latter case, where we have two controllers in the DT, but
are driven by the same driver. We'll create two regmaps, but one will
not have the proper of_node used to retrieve the clock.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[toc] | [prev] | [next] | [standalone]

#1686569 — [PATCH 02/18] drm/sun4i: Add if statement instead of depends on

The depends on relationship is obvious, and using an if statement will
propagate it to every option without the need for each and every one of
them to define it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/gpu/drm/sun4i/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 5bcad8f5fb4f..5cc116692913 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -13,9 +13,10 @@ config DRM_SUN4I
 	  Display Engine. If M is selected the module will be called
 	  sun4i-drm.
 
+if DRM_SUN4I
+
 config DRM_SUN4I_HDMI
        tristate "Allwinner A10 HDMI Controller Support"
-       depends on DRM_SUN4I
        default DRM_SUN4I
        help
 	  Choose this option if you have an Allwinner SoC with an HDMI
@@ -23,7 +24,6 @@ config DRM_SUN4I_HDMI
 
 config DRM_SUN4I_BACKEND
 	tristate "Support for Allwinner A10 Display Engine Backend"
-	depends on DRM_SUN4I
 	default DRM_SUN4I
 	help
 	  Choose this option if you have an Allwinner SoC with the
@@ -33,10 +33,11 @@ config DRM_SUN4I_BACKEND
 
 config DRM_SUN8I_MIXER
 	tristate "Support for Allwinner Display Engine 2.0 Mixer"
-	depends on DRM_SUN4I
 	default MACH_SUN8I
 	help
 	  Choose this option if you have an Allwinner SoC with the
 	  Allwinner Display Engine 2.0, which has a mixer to do some
 	  graphics mixture and feed graphics to TCON, If M is
 	  selected the module will be called sun8i-mixer.
+
+endif
-- 
git-series 0.9.1

[toc] | [prev] | [next] | [standalone]

#1687040 — Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on

On Thu, Jul 13, 2017 at 10:12 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> The depends on relationship is obvious, and using an if statement will
> propagate it to every option without the need for each and every one of
> them to define it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

[toc] | [prev] | [next] | [standalone]

#1688764 — Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on

[Multipart message — attachments visible in raw view] — view raw

On Fri, Jul 14, 2017 at 11:09:07AM +0800, Chen-Yu Tsai wrote:
> On Thu, Jul 13, 2017 at 10:12 PM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > The depends on relationship is obvious, and using an if statement will
> > propagate it to every option without the need for each and every one of
> > them to define it.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> 
> Reviewed-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[toc] | [prev] | [next] | [standalone]

#1686570 — [PATCH 18/18] [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display

The BananaPi M2M has an optional 1280x720 DSI panel. Since that panel is
optional, we can only show a DT patch that would show how to enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 39 +++++++++++++++++++++-
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index eaf09666720d..11a4dfde2679 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -44,6 +44,7 @@
 #include "sun8i-a33.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "BananaPi M2 Magic";
@@ -81,6 +82,14 @@
 		};
 	};
 
+	pwm_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PG10 */
+	};
+
 	reg_vcc5v0: vcc5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0";
@@ -120,6 +129,26 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+
+	panel@0 {
+		compatible = "huarui,lhr050h41";
+		reg = <0>;
+		power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */
+		reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+		backlight = <&pwm_bl>;
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -179,6 +208,12 @@
 	status = "okay";
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -291,6 +326,10 @@
 	status = "okay";
 };
 
+&tcon0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
-- 
git-series 0.9.1

[toc] | [prev] | [next] | [standalone]

#1686571 — [PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it

Some options were not padded as they should, and the order in the Makefile
was chaotic. Fix that.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/gpu/drm/sun4i/Makefile | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index e29fd3a2ba9c..42871ee7acf6 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -1,23 +1,23 @@
-sun4i-drm-y += sun4i_drv.o
-sun4i-drm-y += sun4i_framebuffer.o
+sun4i-backend-y			+= sun4i_backend.o sun4i_layer.o
 
-sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
-sun4i-drm-hdmi-y += sun4i_hdmi_ddc_clk.o
-sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
+sun4i-drm-y			+= sun4i_drv.o
+sun4i-drm-y			+= sun4i_framebuffer.o
 
-sun4i-tcon-y += sun4i_tcon.o
-sun4i-tcon-y += sun4i_rgb.o
-sun4i-tcon-y += sun4i_dotclock.o
-sun4i-tcon-y += sun4i_crtc.o
+sun4i-drm-hdmi-y		+= sun4i_hdmi_enc.o
+sun4i-drm-hdmi-y		+= sun4i_hdmi_ddc_clk.o
+sun4i-drm-hdmi-y		+= sun4i_hdmi_tmds_clk.o
 
-sun4i-backend-y += sun4i_backend.o sun4i_layer.o
+sun4i-tcon-y			+= sun4i_tcon.o
+sun4i-tcon-y			+= sun4i_rgb.o
+sun4i-tcon-y			+= sun4i_dotclock.o
+sun4i-tcon-y			+= sun4i_crtc.o
 
-sun8i-mixer-y += sun8i_mixer.o sun8i_layer.o
+sun8i-mixer-y			+= sun8i_mixer.o sun8i_layer.o
 
 obj-$(CONFIG_DRM_SUN4I)		+= sun4i-drm.o sun4i-tcon.o
 obj-$(CONFIG_DRM_SUN4I)		+= sun6i_drc.o
 obj-$(CONFIG_DRM_SUN4I)		+= sun4i_tv.o
 
-obj-$(CONFIG_DRM_SUN4I_BACKEND)		+= sun4i-backend.o
+obj-$(CONFIG_DRM_SUN4I_BACKEND)	+= sun4i-backend.o
 obj-$(CONFIG_DRM_SUN4I_HDMI)	+= sun4i-drm-hdmi.o
-obj-$(CONFIG_DRM_SUN8I_MIXER)		+= sun8i-mixer.o
+obj-$(CONFIG_DRM_SUN8I_MIXER)	+= sun8i-mixer.o
-- 
git-series 0.9.1

[toc] | [prev] | [next] | [standalone]

#1687041 — Re: [PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it

On Thu, Jul 13, 2017 at 10:12 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Some options were not padded as they should, and the order in the Makefile
> was chaotic. Fix that.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  drivers/gpu/drm/sun4i/Makefile | 26 +++++++++++++-------------
>  1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
> index e29fd3a2ba9c..42871ee7acf6 100644
> --- a/drivers/gpu/drm/sun4i/Makefile
> +++ b/drivers/gpu/drm/sun4i/Makefile
> @@ -1,23 +1,23 @@
> -sun4i-drm-y += sun4i_drv.o
> -sun4i-drm-y += sun4i_framebuffer.o
> +sun4i-backend-y                        += sun4i_backend.o sun4i_layer.o
>
> -sun4i-drm-hdmi-y += sun4i_hdmi_enc.o
> -sun4i-drm-hdmi-y += sun4i_hdmi_ddc_clk.o
> -sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o
> +sun4i-drm-y                    += sun4i_drv.o
> +sun4i-drm-y                    += sun4i_framebuffer.o

I don't think this applies on top of Jonathan's HDMI I2C patch
you already have queued up.

Also you might want to leave a comment describe what the
ordering should be. Otherwise it will still be messed up
down the road.

ChenYu

>
> -sun4i-tcon-y += sun4i_tcon.o
> -sun4i-tcon-y += sun4i_rgb.o
> -sun4i-tcon-y += sun4i_dotclock.o
> -sun4i-tcon-y += sun4i_crtc.o
> +sun4i-drm-hdmi-y               += sun4i_hdmi_enc.o
> +sun4i-drm-hdmi-y               += sun4i_hdmi_ddc_clk.o
> +sun4i-drm-hdmi-y               += sun4i_hdmi_tmds_clk.o
>
> -sun4i-backend-y += sun4i_backend.o sun4i_layer.o
> +sun4i-tcon-y                   += sun4i_tcon.o
> +sun4i-tcon-y                   += sun4i_rgb.o
> +sun4i-tcon-y                   += sun4i_dotclock.o
> +sun4i-tcon-y                   += sun4i_crtc.o
>
> -sun8i-mixer-y += sun8i_mixer.o sun8i_layer.o
> +sun8i-mixer-y                  += sun8i_mixer.o sun8i_layer.o
>
>  obj-$(CONFIG_DRM_SUN4I)                += sun4i-drm.o sun4i-tcon.o
>  obj-$(CONFIG_DRM_SUN4I)                += sun6i_drc.o
>  obj-$(CONFIG_DRM_SUN4I)                += sun4i_tv.o
>
> -obj-$(CONFIG_DRM_SUN4I_BACKEND)                += sun4i-backend.o
> +obj-$(CONFIG_DRM_SUN4I_BACKEND)        += sun4i-backend.o
>  obj-$(CONFIG_DRM_SUN4I_HDMI)   += sun4i-drm-hdmi.o
> -obj-$(CONFIG_DRM_SUN8I_MIXER)          += sun8i-mixer.o
> +obj-$(CONFIG_DRM_SUN8I_MIXER)  += sun8i-mixer.o
> --
> git-series 0.9.1

[toc] | [prev] | [standalone]

Page 2 of 2 — ← Prev page 1 [2]

Back to top | Article view | linux.kernel

csiph-web