Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1686569
| From | Maxime Ripard <maxime.ripard@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 02/18] drm/sun4i: Add if statement instead of depends on |
| Date | 2017-07-13 16:20 +0200 |
| Message-ID | <u2N8g-6Ff-45@gated-at.bofh.it> (permalink) |
| References | <u2N8d-6Ff-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The depends on relationship is obvious, and using an if statement will
propagate it to every option without the need for each and every one of
them to define it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/gpu/drm/sun4i/Kconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 5bcad8f5fb4f..5cc116692913 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -13,9 +13,10 @@ config DRM_SUN4I
Display Engine. If M is selected the module will be called
sun4i-drm.
+if DRM_SUN4I
+
config DRM_SUN4I_HDMI
tristate "Allwinner A10 HDMI Controller Support"
- depends on DRM_SUN4I
default DRM_SUN4I
help
Choose this option if you have an Allwinner SoC with an HDMI
@@ -23,7 +24,6 @@ config DRM_SUN4I_HDMI
config DRM_SUN4I_BACKEND
tristate "Support for Allwinner A10 Display Engine Backend"
- depends on DRM_SUN4I
default DRM_SUN4I
help
Choose this option if you have an Allwinner SoC with the
@@ -33,10 +33,11 @@ config DRM_SUN4I_BACKEND
config DRM_SUN8I_MIXER
tristate "Support for Allwinner Display Engine 2.0 Mixer"
- depends on DRM_SUN4I
default MACH_SUN8I
help
Choose this option if you have an Allwinner SoC with the
Allwinner Display Engine 2.0, which has a mixer to do some
graphics mixture and feed graphics to TCON, If M is
selected the module will be called sun8i-mixer.
+
+endif
--
git-series 0.9.1
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 00/18] drm/sun4i: Allwinner MIPI-DSI support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable the TCON Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable the TCON Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:50 +0200
[PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200
Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
[PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Andrzej Hajda <a.hajda@samsung.com> - 2017-07-14 11:30 +0200
[PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
[PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
[PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup kbuild test robot <lkp@intel.com> - 2017-07-14 12:00 +0200
Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Chen-Yu Tsai <wens@csie.org> - 2017-07-18 05:50 +0200
[PATCH 16/18] arm: dts: sun8i: a33: Add the DSI-related nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:20 +0200
[PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:50 +0200
Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
[PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Chen-Yu Tsai <wens@csie.org> - 2017-07-14 10:00 +0200
[PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Mark Brown <broonie@kernel.org> - 2017-07-13 18:10 +0200
Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
[PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:10 +0200
Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
[PATCH 18/18] [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200
csiph-web