Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1686570
| From | Maxime Ripard <maxime.ripard@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 18/18] [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display |
| Date | 2017-07-13 16:20 +0200 |
| Message-ID | <u2N8f-6Ff-43@gated-at.bofh.it> (permalink) |
| References | <u2N8d-6Ff-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The BananaPi M2M has an optional 1280x720 DSI panel. Since that panel is
optional, we can only show a DT patch that would show how to enable it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 39 +++++++++++++++++++++-
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index eaf09666720d..11a4dfde2679 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -44,6 +44,7 @@
#include "sun8i-a33.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "BananaPi M2 Magic";
@@ -81,6 +82,14 @@
};
};
+ pwm_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <1 2 4 8 16 32 64 128 255>;
+ default-brightness-level = <8>;
+ enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PG10 */
+ };
+
reg_vcc5v0: vcc5v0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v0";
@@ -120,6 +129,26 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
+&dphy0 {
+ status = "okay";
+};
+
+&dsi0 {
+ status = "okay";
+
+ panel@0 {
+ compatible = "huarui,lhr050h41";
+ reg = <0>;
+ power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */
+ reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+ backlight = <&pwm_bl>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -179,6 +208,12 @@
status = "okay";
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
@@ -291,6 +326,10 @@
status = "okay";
};
+&tcon0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
--
git-series 0.9.1
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 00/18] drm/sun4i: Allwinner MIPI-DSI support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable the TCON Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable the TCON Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:50 +0200
[PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200
Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
[PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Andrzej Hajda <a.hajda@samsung.com> - 2017-07-14 11:30 +0200
[PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
[PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
[PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup kbuild test robot <lkp@intel.com> - 2017-07-14 12:00 +0200
Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Chen-Yu Tsai <wens@csie.org> - 2017-07-18 05:50 +0200
[PATCH 16/18] arm: dts: sun8i: a33: Add the DSI-related nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:20 +0200
[PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:50 +0200
Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
[PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Chen-Yu Tsai <wens@csie.org> - 2017-07-14 10:00 +0200
[PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Mark Brown <broonie@kernel.org> - 2017-07-13 18:10 +0200
Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
[PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:10 +0200
Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
[PATCH 18/18] [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200
csiph-web