Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1675472 > unrolled thread

[PATCH v4 00/14] spi: qup: Fixes and add support for >64k transfers

Back to article view | Back to linux.kernel

Contents

  [PATCH v4 00/14] spi: qup: Fixes and add support for >64k transfers Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 07/14] spi: qup: Fix transaction done signaling Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 11/14] spi: qup: allow block mode to generate multiple transactions Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 14/14] spi: qup: Ensure done detection Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 03/14] spi: qup: Add completion structures for DMA Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 08/14] spi: qup: Do block sized read/write in block mode Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 02/14] spi: qup: Setup DMA mode correctly Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 12/14] spi: qup: refactor spi_qup_prep_sg Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 11:50 +0200
    [PATCH v4 01/14] spi: qup: Enable chip select support Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 12:00 +0200
    [PATCH v4 05/14] spi: qup: Place the QUP in run mode before DMA Varadarajan Narayanan <varada@codeaurora.org> - 2017-06-27 12:00 +0200

#1675472 — [PATCH v4 00/14] spi: qup: Fixes and add support for >64k transfers

v4:
	Discard patch #15, 'spi: qup: support for qup v1 dma'.
	This depends on ADM driver, which is not upstreamed yet.

v3:
	Fix git bisect-ability issues in
		spi: qup: Add completion structures for DMA
		spi: qup: Add completion timeout
		spi: qup: Place the QUP in run mode before DMA
		spi: qup: Fix transaction done signaling

v2:
	Incorporate feedback from Andy Gross, Sricharan, Stanimir Varbanov

	Modified the QUP-v1 dma completion sequence to QUP-v2 as per feedback.

	Removed code that used controller->xfer to identify extra interrupts,
	since with the fixes done to handle i/o completion we don't see
	extra interrupts.

v1:
	This series fixes some existing issues in the code for both
	interrupt and dma mode. Patches 1 - 11 are the fixes.
	Random failures/timeout are observed without these fixes.
	Also, the current driver does not support block transfers > 64K
	and the driver quietly fails. Patches 12 - 18 add support for this
	in both interrupt and dma mode.

	The entire series has been tested on ipq4019 with
	SPI-NOR flash for block sizes > 64k.

Varadarajan Narayanan (14):
  spi: qup: Enable chip select support
  spi: qup: Setup DMA mode correctly
  spi: qup: Add completion structures for DMA
  spi: qup: Add completion timeout
  spi: qup: Place the QUP in run mode before DMA
  spi: qup: Fix error handling in spi_qup_prep_sg
  spi: qup: Fix transaction done signaling
  spi: qup: Do block sized read/write in block mode
  spi: qup: refactor spi_qup_io_config into two functions
  spi: qup: call io_config in mode specific function
  spi: qup: allow block mode to generate multiple transactions
  spi: qup: refactor spi_qup_prep_sg
  spi: qup: allow multiple DMA transactions per spi xfer
  spi: qup: Ensure done detection

 drivers/spi/spi-qup.c | 597 ++++++++++++++++++++++++++++++++++----------------
 1 file changed, 408 insertions(+), 189 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [next] | [standalone]

#1675473 — [PATCH v4 07/14] spi: qup: Fix transaction done signaling

Wait to signal done until we get all of the interrupts we are expecting
to get for a transaction.  If we don't wait for the input done flag, we
can be in between transactions when the done flag comes in and this can
mess up the next transaction.

While here cleaning up the code which sets controller->xfer = NULL and
restores it in the ISR. This looks to be some debug code which is not
required.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 27 +++++----------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index e2b4a50..2bd5115 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -407,29 +407,16 @@ static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer,
 static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 {
 	struct spi_qup *controller = dev_id;
-	struct spi_transfer *xfer;
+	struct spi_transfer *xfer = controller->xfer;
 	u32 opflags, qup_err, spi_err;
-	unsigned long flags;
 	int error = 0;
 
-	spin_lock_irqsave(&controller->lock, flags);
-	xfer = controller->xfer;
-	controller->xfer = NULL;
-	spin_unlock_irqrestore(&controller->lock, flags);
-
 	qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
 	spi_err = readl_relaxed(controller->base + SPI_ERROR_FLAGS);
 	opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
 
 	writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS);
 	writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS);
-	writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
-
-	if (!xfer) {
-		dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n",
-				    qup_err, spi_err, opflags);
-		return IRQ_HANDLED;
-	}
 
 	if (qup_err) {
 		if (qup_err & QUP_ERROR_OUTPUT_OVER_RUN)
@@ -453,7 +440,9 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 		error = -EIO;
 	}
 
-	if (!spi_qup_is_dma_xfer(controller->mode)) {
+	if (spi_qup_is_dma_xfer(controller->mode)) {
+		writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
+	} else {
 		if (opflags & QUP_OP_IN_SERVICE_FLAG)
 			spi_qup_fifo_read(controller, xfer);
 
@@ -461,12 +450,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 			spi_qup_fifo_write(controller, xfer);
 	}
 
-	spin_lock_irqsave(&controller->lock, flags);
-	controller->error = error;
-	controller->xfer = xfer;
-	spin_unlock_irqrestore(&controller->lock, flags);
-
-	if (controller->rx_bytes == xfer->len || error)
+	if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
 		complete(&controller->done);
 
 	return IRQ_HANDLED;
@@ -666,7 +650,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
 exit:
 	spi_qup_set_state(controller, QUP_STATE_RESET);
 	spin_lock_irqsave(&controller->lock, flags);
-	controller->xfer = NULL;
 	if (!ret)
 		ret = controller->error;
 	spin_unlock_irqrestore(&controller->lock, flags);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675475 — [PATCH v4 11/14] spi: qup: allow block mode to generate multiple transactions

This let's you write more to the SPI bus than 64K-1 which is important
if the block size of a SPI device is >= 64K or some other device wants
to do something larger.

This has the benefit of completely removing spi_message from the spi-qup
transactions

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 128 +++++++++++++++++++++++++++++++-------------------
 1 file changed, 80 insertions(+), 48 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 37b51e3..026f25e 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -120,7 +120,7 @@
 
 #define SPI_NUM_CHIPSELECTS		4
 
-#define SPI_MAX_DMA_XFER		(SZ_64K - 64)
+#define SPI_MAX_XFER			(SZ_64K - 64)
 
 /* high speed mode is when bus rate is greater then 26MHz */
 #define SPI_HS_MIN_RATE			26000000
@@ -151,6 +151,8 @@ struct spi_qup {
 	int			n_words;
 	int			tx_bytes;
 	int			rx_bytes;
+	const u8		*tx_buf;
+	u8			*rx_buf;
 	int			qup_v1;
 
 	int			mode;
@@ -175,6 +177,12 @@ static inline bool spi_qup_is_dma_xfer(int mode)
 	return false;
 }
 
+/* get's the transaction size length */
+static inline unsigned int spi_qup_len(struct spi_qup *controller)
+{
+	return controller->n_words * controller->w_size;
+}
+
 static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
 {
 	u32 opstate = readl_relaxed(controller->base + QUP_STATE);
@@ -227,10 +235,9 @@ static int spi_qup_set_state(struct spi_qup *controller, u32 state)
 	return 0;
 }
 
-static void spi_qup_read_from_fifo(struct spi_qup *controller,
-	struct spi_transfer *xfer, u32 num_words)
+static void spi_qup_read_from_fifo(struct spi_qup *controller, u32 num_words)
 {
-	u8 *rx_buf = xfer->rx_buf;
+	u8 *rx_buf = controller->rx_buf;
 	int i, shift, num_bytes;
 	u32 word;
 
@@ -238,8 +245,9 @@ static void spi_qup_read_from_fifo(struct spi_qup *controller,
 
 		word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
 
-		num_bytes = min_t(int, xfer->len - controller->rx_bytes,
-					controller->w_size);
+		num_bytes = min_t(int, spi_qup_len(controller) -
+				       controller->rx_bytes,
+				       controller->w_size);
 
 		if (!rx_buf) {
 			controller->rx_bytes += num_bytes;
@@ -260,13 +268,12 @@ static void spi_qup_read_from_fifo(struct spi_qup *controller,
 	}
 }
 
-static void spi_qup_read(struct spi_qup *controller,
-			    struct spi_transfer *xfer)
+static void spi_qup_read(struct spi_qup *controller)
 {
 	u32 remainder, words_per_block, num_words;
 	bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
 
-	remainder = DIV_ROUND_UP(xfer->len - controller->rx_bytes,
+	remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->rx_bytes,
 				 controller->w_size);
 	words_per_block = controller->in_blk_sz >> 2;
 
@@ -287,7 +294,7 @@ static void spi_qup_read(struct spi_qup *controller,
 		}
 
 		/* read up to the maximum transfer size available */
-		spi_qup_read_from_fifo(controller, xfer, num_words);
+		spi_qup_read_from_fifo(controller, num_words);
 
 		remainder -= num_words;
 
@@ -309,18 +316,18 @@ static void spi_qup_read(struct spi_qup *controller,
 
 }
 
-static void spi_qup_write_to_fifo(struct spi_qup *controller,
-	struct spi_transfer *xfer, u32 num_words)
+static void spi_qup_write_to_fifo(struct spi_qup *controller, u32 num_words)
 {
-	const u8 *tx_buf = xfer->tx_buf;
+	const u8 *tx_buf = controller->tx_buf;
 	int i, num_bytes;
 	u32 word, data;
 
 	for (; num_words; num_words--) {
 		word = 0;
 
-		num_bytes = min_t(int, xfer->len - controller->tx_bytes,
-				    controller->w_size);
+		num_bytes = min_t(int, spi_qup_len(controller) -
+				       controller->tx_bytes,
+				       controller->w_size);
 		if (tx_buf)
 			for (i = 0; i < num_bytes; i++) {
 				data = tx_buf[controller->tx_bytes + i];
@@ -338,13 +345,12 @@ static void spi_qup_dma_done(void *data)
 	complete(data);
 }
 
-static void spi_qup_write(struct spi_qup *controller,
-			    struct spi_transfer *xfer)
+static void spi_qup_write(struct spi_qup *controller)
 {
 	bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
 	u32 remainder, words_per_block, num_words;
 
-	remainder = DIV_ROUND_UP(xfer->len - controller->tx_bytes,
+	remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->tx_bytes,
 				 controller->w_size);
 	words_per_block = controller->out_blk_sz >> 2;
 
@@ -364,7 +370,7 @@ static void spi_qup_write(struct spi_qup *controller,
 			num_words = 1;
 		}
 
-		spi_qup_write_to_fifo(controller, xfer, num_words);
+		spi_qup_write_to_fifo(controller, num_words);
 
 		remainder -= num_words;
 
@@ -469,36 +475,62 @@ static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
 {
 	struct spi_master *master = spi->master;
 	struct spi_qup *qup = spi_master_get_devdata(master);
-	int ret;
+	int ret, n_words, iterations, offset = 0;
 
-	ret = spi_qup_io_config(spi, xfer);
-	if (ret)
-		return ret;
+	n_words = qup->n_words;
+	iterations = n_words / SPI_MAX_XFER; /* round down */
+	qup->rx_buf = xfer->rx_buf;
+	qup->tx_buf = xfer->tx_buf;
 
-	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
-	if (ret) {
-		dev_warn(qup->dev, "cannot set RUN state\n");
-		return ret;
-	}
+	do {
+		if (iterations)
+			qup->n_words = SPI_MAX_XFER;
+		else
+			qup->n_words = n_words % SPI_MAX_XFER;
 
-	ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
-	if (ret) {
-		dev_warn(qup->dev, "cannot set PAUSE state\n");
-		return ret;
-	}
+		if (qup->tx_buf && offset)
+			qup->tx_buf = xfer->tx_buf + offset * SPI_MAX_XFER;
 
-	if (qup->mode == QUP_IO_M_MODE_FIFO)
-		spi_qup_write(qup, xfer);
+		if (qup->rx_buf && offset)
+			qup->rx_buf = xfer->rx_buf + offset * SPI_MAX_XFER;
 
-	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
-	if (ret) {
-		dev_warn(qup->dev, "%s(%d): cannot set RUN state\n",
-				__func__, __LINE__);
-		return ret;
-	}
+		/*
+		 * if the transaction is small enough, we need
+		 * to fallback to FIFO mode
+		 */
+		if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
+			qup->mode = QUP_IO_M_MODE_FIFO;
 
-	if (!wait_for_completion_timeout(&qup->done, timeout))
-		return -ETIMEDOUT;
+		ret = spi_qup_io_config(spi, xfer);
+		if (ret)
+			return ret;
+
+		ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+		if (ret) {
+			dev_warn(qup->dev, "cannot set RUN state\n");
+			return ret;
+		}
+
+		ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
+		if (ret) {
+			dev_warn(qup->dev, "cannot set PAUSE state\n");
+			return ret;
+		}
+
+		if (qup->mode == QUP_IO_M_MODE_FIFO)
+			spi_qup_write(qup);
+
+		ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+		if (ret) {
+			dev_warn(qup->dev, "cannot set RUN state\n");
+			return ret;
+		}
+
+		if (!wait_for_completion_timeout(&qup->done, timeout))
+			return -ETIMEDOUT;
+
+		offset++;
+	} while (iterations--);
 
 	return 0;
 }
@@ -506,7 +538,6 @@ static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
 static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 {
 	struct spi_qup *controller = dev_id;
-	struct spi_transfer *xfer = controller->xfer;
 	u32 opflags, qup_err, spi_err;
 	int error = 0;
 
@@ -543,10 +574,10 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 		writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
 	} else {
 		if (opflags & QUP_OP_IN_SERVICE_FLAG)
-			spi_qup_read(controller, xfer);
+			spi_qup_read(controller);
 
 		if (opflags & QUP_OP_OUT_SERVICE_FLAG)
-			spi_qup_write(controller, xfer);
+			spi_qup_write(controller);
 	}
 
 	if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
@@ -756,7 +787,8 @@ static int spi_qup_transfer_one(struct spi_master *master,
 		return ret;
 
 	timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
-	timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
+	timeout = DIV_ROUND_UP(min_t(unsigned long, SPI_MAX_XFER,
+				     xfer->len) * 8, timeout);
 	timeout = 100 * msecs_to_jiffies(timeout);
 
 	if (spi_qup_is_dma_xfer(controller->mode))
@@ -961,7 +993,7 @@ static int spi_qup_probe(struct platform_device *pdev)
 	master->dev.of_node = pdev->dev.of_node;
 	master->auto_runtime_pm = true;
 	master->dma_alignment = dma_get_cache_alignment();
-	master->max_dma_len = SPI_MAX_DMA_XFER;
+	master->max_dma_len = SPI_MAX_XFER;
 
 	platform_set_drvdata(pdev, master);
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675477 — [PATCH v4 14/14] spi: qup: Ensure done detection

This patch fixes an issue where a SPI transaction has completed, but the
done condition is missed.  This occurs because at the time of interrupt the
MAX_INPUT_DONE_FLAG is not asserted.  However, in the process of reading
blocks of data from the FIFO, the last portion of data comes in.

The opflags read at the beginning of the irq handler no longer matches the
current opflag state.  To get around this condition, the block read
function should update the opflags so that done detection is correct after
the return.

Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index a39a0d2..ca5206e 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -268,7 +268,7 @@ static void spi_qup_read_from_fifo(struct spi_qup *controller, u32 num_words)
 	}
 }
 
-static void spi_qup_read(struct spi_qup *controller)
+static void spi_qup_read(struct spi_qup *controller, u32 *opflags)
 {
 	u32 remainder, words_per_block, num_words;
 	bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
@@ -307,10 +307,12 @@ static void spi_qup_read(struct spi_qup *controller)
 
 	/*
 	 * Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block
-	 * mode reads, it has to be cleared again at the very end
+	 * reads, it has to be cleared again at the very end.  However, be sure
+	 * to refresh opflags value because MAX_INPUT_DONE_FLAG may now be
+	 * present and this is used to determine if transaction is complete
 	 */
-	if (is_block_mode && spi_qup_is_flag_set(controller,
-				QUP_OP_MAX_INPUT_DONE_FLAG))
+	*opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
+	if (is_block_mode && *opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
 		writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
 			       controller->base + QUP_OPERATIONAL);
 
@@ -617,7 +619,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 		writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
 	} else {
 		if (opflags & QUP_OP_IN_SERVICE_FLAG)
-			spi_qup_read(controller);
+			spi_qup_read(controller, &opflags);
 
 		if (opflags & QUP_OP_OUT_SERVICE_FLAG)
 			spi_qup_write(controller);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675478 — [PATCH v4 03/14] spi: qup: Add completion structures for DMA

Use different 'completion' structures to track the completion
of DMA Tx/Rx and PIO.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 35 ++++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index abe799b..59e799f 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -142,6 +142,8 @@ struct spi_qup {
 
 	struct spi_transfer	*xfer;
 	struct completion	done;
+	struct completion	txc;
+	struct completion	rxc;
 	int			error;
 	int			w_size;	/* bytes per SPI word */
 	int			n_words;
@@ -283,16 +285,13 @@ static void spi_qup_fifo_write(struct spi_qup *controller,
 
 static void spi_qup_dma_done(void *data)
 {
-	struct spi_qup *qup = data;
-
-	complete(&qup->done);
+	complete(data);
 }
 
 static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
 			   enum dma_transfer_direction dir,
-			   dma_async_tx_callback callback)
+			   dma_async_tx_callback callback, void *data)
 {
-	struct spi_qup *qup = spi_master_get_devdata(master);
 	unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE;
 	struct dma_async_tx_descriptor *desc;
 	struct scatterlist *sgl;
@@ -315,7 +314,7 @@ static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
 		return -EINVAL;
 
 	desc->callback = callback;
-	desc->callback_param = qup;
+	desc->callback_param = data;
 
 	cookie = dmaengine_submit(desc);
 
@@ -333,16 +332,12 @@ static void spi_qup_dma_terminate(struct spi_master *master,
 
 static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer)
 {
-	dma_async_tx_callback rx_done = NULL, tx_done = NULL;
+	struct spi_qup *qup = spi_master_get_devdata(master);
 	int ret;
 
-	if (xfer->rx_buf)
-		rx_done = spi_qup_dma_done;
-	else if (xfer->tx_buf)
-		tx_done = spi_qup_dma_done;
-
 	if (xfer->rx_buf) {
-		ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM, rx_done);
+		ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM,
+					spi_qup_dma_done, &qup->rxc);
 		if (ret)
 			return ret;
 
@@ -350,7 +345,8 @@ static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer)
 	}
 
 	if (xfer->tx_buf) {
-		ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV, tx_done);
+		ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV,
+					spi_qup_dma_done, &qup->txc);
 		if (ret)
 			return ret;
 
@@ -622,7 +618,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
 	timeout = 100 * msecs_to_jiffies(timeout);
 
-	reinit_completion(&controller->done);
 
 	spin_lock_irqsave(&controller->lock, flags);
 	controller->xfer     = xfer;
@@ -631,10 +626,14 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	controller->tx_bytes = 0;
 	spin_unlock_irqrestore(&controller->lock, flags);
 
-	if (spi_qup_is_dma_xfer(controller->mode))
+	if (spi_qup_is_dma_xfer(controller->mode)) {
+		reinit_completion(&controller->rxc);
+		reinit_completion(&controller->txc);
 		ret = spi_qup_do_dma(master, xfer);
-	else
+	} else {
+		reinit_completion(&controller->done);
 		ret = spi_qup_do_pio(master, xfer);
+	}
 
 	if (ret)
 		goto exit;
@@ -860,6 +859,8 @@ static int spi_qup_probe(struct platform_device *pdev)
 		master->set_cs = spi_qup_set_cs;
 
 	spin_lock_init(&controller->lock);
+	init_completion(&controller->rxc);
+	init_completion(&controller->txc);
 	init_completion(&controller->done);
 
 	iomode = readl_relaxed(base + QUP_IO_M_MODES);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675479 — [PATCH v4 08/14] spi: qup: Do block sized read/write in block mode

This patch corrects the behavior of the BLOCK
transactions.  During block transactions, the controller
must be read/written to in block size transactions.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 151 +++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 119 insertions(+), 32 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 2bd5115..1a83248 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -82,6 +82,8 @@
 #define QUP_IO_M_MODE_BAM		3
 
 /* QUP_OPERATIONAL fields */
+#define QUP_OP_IN_BLOCK_READ_REQ	BIT(13)
+#define QUP_OP_OUT_BLOCK_WRITE_REQ	BIT(12)
 #define QUP_OP_MAX_INPUT_DONE_FLAG	BIT(11)
 #define QUP_OP_MAX_OUTPUT_DONE_FLAG	BIT(10)
 #define QUP_OP_IN_SERVICE_FLAG		BIT(9)
@@ -156,6 +158,13 @@ struct spi_qup {
 	struct dma_slave_config	tx_conf;
 };
 
+static inline bool spi_qup_is_flag_set(struct spi_qup *controller, u32 flag)
+{
+	u32 opflag = readl_relaxed(controller->base + QUP_OPERATIONAL);
+
+	return (opflag & flag) != 0;
+}
+
 static inline bool spi_qup_is_dma_xfer(int mode)
 {
 	if (mode == QUP_IO_M_MODE_DMOV || mode == QUP_IO_M_MODE_BAM)
@@ -216,29 +225,26 @@ static int spi_qup_set_state(struct spi_qup *controller, u32 state)
 	return 0;
 }
 
-static void spi_qup_fifo_read(struct spi_qup *controller,
-			    struct spi_transfer *xfer)
+static void spi_qup_read_from_fifo(struct spi_qup *controller,
+	struct spi_transfer *xfer, u32 num_words)
 {
 	u8 *rx_buf = xfer->rx_buf;
-	u32 word, state;
-	int idx, shift, w_size;
+	int i, shift, num_bytes;
+	u32 word;
 
-	w_size = controller->w_size;
-
-	while (controller->rx_bytes < xfer->len) {
-
-		state = readl_relaxed(controller->base + QUP_OPERATIONAL);
-		if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY))
-			break;
+	for (; num_words; num_words--) {
 
 		word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
 
+		num_bytes = min_t(int, xfer->len - controller->rx_bytes,
+					controller->w_size);
+
 		if (!rx_buf) {
-			controller->rx_bytes += w_size;
+			controller->rx_bytes += num_bytes;
 			continue;
 		}
 
-		for (idx = 0; idx < w_size; idx++, controller->rx_bytes++) {
+		for (i = 0; i < num_bytes; i++, controller->rx_bytes++) {
 			/*
 			 * The data format depends on bytes per SPI word:
 			 *  4 bytes: 0x12345678
@@ -246,38 +252,80 @@ static void spi_qup_fifo_read(struct spi_qup *controller,
 			 *  1 byte : 0x00000012
 			 */
 			shift = BITS_PER_BYTE;
-			shift *= (w_size - idx - 1);
+			shift *= (controller->w_size - i - 1);
 			rx_buf[controller->rx_bytes] = word >> shift;
 		}
 	}
 }
 
-static void spi_qup_fifo_write(struct spi_qup *controller,
+static void spi_qup_read(struct spi_qup *controller,
 			    struct spi_transfer *xfer)
 {
-	const u8 *tx_buf = xfer->tx_buf;
-	u32 word, state, data;
-	int idx, w_size;
+	u32 remainder, words_per_block, num_words;
+	bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
+
+	remainder = DIV_ROUND_UP(xfer->len - controller->rx_bytes,
+				 controller->w_size);
+	words_per_block = controller->in_blk_sz >> 2;
+
+	do {
+		/* ACK by clearing service flag */
+		writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
+			       controller->base + QUP_OPERATIONAL);
+
+		if (is_block_mode) {
+			num_words = (remainder > words_per_block) ?
+					words_per_block : remainder;
+		} else {
+			if (!spi_qup_is_flag_set(controller,
+						 QUP_OP_IN_FIFO_NOT_EMPTY))
+				break;
 
-	w_size = controller->w_size;
+			num_words = 1;
+		}
 
-	while (controller->tx_bytes < xfer->len) {
+		/* read up to the maximum transfer size available */
+		spi_qup_read_from_fifo(controller, xfer, num_words);
 
-		state = readl_relaxed(controller->base + QUP_OPERATIONAL);
-		if (state & QUP_OP_OUT_FIFO_FULL)
+		remainder -= num_words;
+
+		/* if block mode, check to see if next block is available */
+		if (is_block_mode && !spi_qup_is_flag_set(controller,
+					QUP_OP_IN_BLOCK_READ_REQ))
 			break;
 
+	} while (remainder);
+
+	/*
+	 * Due to extra stickiness of the QUP_OP_IN_SERVICE_FLAG during block
+	 * mode reads, it has to be cleared again at the very end
+	 */
+	if (is_block_mode && spi_qup_is_flag_set(controller,
+				QUP_OP_MAX_INPUT_DONE_FLAG))
+		writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
+			       controller->base + QUP_OPERATIONAL);
+
+}
+
+static void spi_qup_write_to_fifo(struct spi_qup *controller,
+	struct spi_transfer *xfer, u32 num_words)
+{
+	const u8 *tx_buf = xfer->tx_buf;
+	int i, num_bytes;
+	u32 word, data;
+
+	for (; num_words; num_words--) {
 		word = 0;
-		for (idx = 0; idx < w_size; idx++, controller->tx_bytes++) {
 
-			if (!tx_buf) {
-				controller->tx_bytes += w_size;
-				break;
+		num_bytes = min_t(int, xfer->len - controller->tx_bytes,
+				    controller->w_size);
+		if (tx_buf)
+			for (i = 0; i < num_bytes; i++) {
+				data = tx_buf[controller->tx_bytes + i];
+				word |= data << (BITS_PER_BYTE * (3 - i));
 			}
 
-			data = tx_buf[controller->tx_bytes];
-			word |= data << (BITS_PER_BYTE * (3 - idx));
-		}
+		controller->tx_bytes += num_bytes;
 
 		writel_relaxed(word, controller->base + QUP_OUTPUT_FIFO);
 	}
@@ -288,6 +336,44 @@ static void spi_qup_dma_done(void *data)
 	complete(data);
 }
 
+static void spi_qup_write(struct spi_qup *controller,
+			    struct spi_transfer *xfer)
+{
+	bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
+	u32 remainder, words_per_block, num_words;
+
+	remainder = DIV_ROUND_UP(xfer->len - controller->tx_bytes,
+				 controller->w_size);
+	words_per_block = controller->out_blk_sz >> 2;
+
+	do {
+		/* ACK by clearing service flag */
+		writel_relaxed(QUP_OP_OUT_SERVICE_FLAG,
+			       controller->base + QUP_OPERATIONAL);
+
+		if (is_block_mode) {
+			num_words = (remainder > words_per_block) ?
+				words_per_block : remainder;
+		} else {
+			if (spi_qup_is_flag_set(controller,
+						QUP_OP_OUT_FIFO_FULL))
+				break;
+
+			num_words = 1;
+		}
+
+		spi_qup_write_to_fifo(controller, xfer, num_words);
+
+		remainder -= num_words;
+
+		/* if block mode, check to see if next block is available */
+		if (is_block_mode && !spi_qup_is_flag_set(controller,
+					QUP_OP_OUT_BLOCK_WRITE_REQ))
+			break;
+
+	} while (remainder);
+}
+
 static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
 			   enum dma_transfer_direction dir,
 			   dma_async_tx_callback callback, void *data)
@@ -389,7 +475,8 @@ static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer,
 		return ret;
 	}
 
-	spi_qup_fifo_write(qup, xfer);
+	if (qup->mode == QUP_IO_M_MODE_FIFO)
+		spi_qup_write(qup, xfer);
 
 	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
 	if (ret) {
@@ -444,10 +531,10 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 		writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
 	} else {
 		if (opflags & QUP_OP_IN_SERVICE_FLAG)
-			spi_qup_fifo_read(controller, xfer);
+			spi_qup_read(controller, xfer);
 
 		if (opflags & QUP_OP_OUT_SERVICE_FLAG)
-			spi_qup_fifo_write(controller, xfer);
+			spi_qup_write(controller, xfer);
 	}
 
 	if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675480 — [PATCH v4 02/14] spi: qup: Setup DMA mode correctly

To operate in DMA mode, the buffer should be aligned and
the size of the transfer should be a multiple of block size
(for v1). And the no. of words being transferred should
be programmed in the count registers appropriately.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 118 +++++++++++++++++++++++---------------------------
 1 file changed, 55 insertions(+), 63 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index c0d4def..abe799b 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -149,11 +149,18 @@ struct spi_qup {
 	int			rx_bytes;
 	int			qup_v1;
 
-	int			use_dma;
+	int			mode;
 	struct dma_slave_config	rx_conf;
 	struct dma_slave_config	tx_conf;
 };
 
+static inline bool spi_qup_is_dma_xfer(int mode)
+{
+	if (mode == QUP_IO_M_MODE_DMOV || mode == QUP_IO_M_MODE_BAM)
+		return true;
+
+	return false;
+}
 
 static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
 {
@@ -424,7 +431,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 		error = -EIO;
 	}
 
-	if (!controller->use_dma) {
+	if (!spi_qup_is_dma_xfer(controller->mode)) {
 		if (opflags & QUP_OP_IN_SERVICE_FLAG)
 			spi_qup_fifo_read(controller, xfer);
 
@@ -443,34 +450,11 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static u32
-spi_qup_get_mode(struct spi_master *master, struct spi_transfer *xfer)
-{
-	struct spi_qup *qup = spi_master_get_devdata(master);
-	u32 mode;
-
-	qup->w_size = 4;
-
-	if (xfer->bits_per_word <= 8)
-		qup->w_size = 1;
-	else if (xfer->bits_per_word <= 16)
-		qup->w_size = 2;
-
-	qup->n_words = xfer->len / qup->w_size;
-
-	if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
-		mode = QUP_IO_M_MODE_FIFO;
-	else
-		mode = QUP_IO_M_MODE_BLOCK;
-
-	return mode;
-}
-
 /* set clock freq ... bits per word */
 static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 {
 	struct spi_qup *controller = spi_master_get_devdata(spi->master);
-	u32 config, iomode, mode, control;
+	u32 config, iomode, control;
 	int ret, n_words;
 
 	if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
@@ -491,25 +475,30 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 		return -EIO;
 	}
 
-	mode = spi_qup_get_mode(spi->master, xfer);
+	controller->w_size = DIV_ROUND_UP(xfer->bits_per_word, 8);
+	controller->n_words = xfer->len / controller->w_size;
 	n_words = controller->n_words;
 
-	if (mode == QUP_IO_M_MODE_FIFO) {
+	if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
+
+		controller->mode = QUP_IO_M_MODE_FIFO;
+
 		writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
 		writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
 		/* must be zero for FIFO */
 		writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
 		writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
-	} else if (!controller->use_dma) {
+	} else if (spi->master->can_dma &&
+		   spi->master->can_dma(spi->master, spi, xfer) &&
+		   spi->master->cur_msg_mapped) {
+
+		controller->mode = QUP_IO_M_MODE_BAM;
+
 		writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
 		writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
 		/* must be zero for BLOCK and BAM */
 		writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
 		writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
-	} else {
-		mode = QUP_IO_M_MODE_BAM;
-		writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
-		writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
 
 		if (!controller->qup_v1) {
 			void __iomem *input_cnt;
@@ -528,19 +517,28 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 
 			writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
 		}
+	} else {
+
+		controller->mode = QUP_IO_M_MODE_BLOCK;
+
+		writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
+		writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
+		/* must be zero for BLOCK and BAM */
+		writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
+		writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
 	}
 
 	iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
 	/* Set input and output transfer mode */
 	iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
 
-	if (!controller->use_dma)
+	if (!spi_qup_is_dma_xfer(controller->mode))
 		iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
 	else
 		iomode |= QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN;
 
-	iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
-	iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
+	iomode |= (controller->mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
+	iomode |= (controller->mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
 
 	writel_relaxed(iomode, controller->base + QUP_IO_M_MODES);
 
@@ -581,7 +579,7 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 	config |= xfer->bits_per_word - 1;
 	config |= QUP_CONFIG_SPI_MODE;
 
-	if (controller->use_dma) {
+	if (spi_qup_is_dma_xfer(controller->mode)) {
 		if (!xfer->tx_buf)
 			config |= QUP_CONFIG_NO_OUTPUT;
 		if (!xfer->rx_buf)
@@ -599,7 +597,7 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 		 * status change in BAM mode
 		 */
 
-		if (mode == QUP_IO_M_MODE_BAM)
+		if (spi_qup_is_dma_xfer(controller->mode))
 			mask = QUP_OP_IN_SERVICE_FLAG | QUP_OP_OUT_SERVICE_FLAG;
 
 		writel_relaxed(mask, controller->base + QUP_OPERATIONAL_MASK);
@@ -633,7 +631,7 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	controller->tx_bytes = 0;
 	spin_unlock_irqrestore(&controller->lock, flags);
 
-	if (controller->use_dma)
+	if (spi_qup_is_dma_xfer(controller->mode))
 		ret = spi_qup_do_dma(master, xfer);
 	else
 		ret = spi_qup_do_pio(master, xfer);
@@ -641,14 +639,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
 	if (ret)
 		goto exit;
 
-	if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
-		dev_warn(controller->dev, "cannot set EXECUTE state\n");
-		goto exit;
-	}
-
-	if (!wait_for_completion_timeout(&controller->done, timeout))
-		ret = -ETIMEDOUT;
-
 exit:
 	spi_qup_set_state(controller, QUP_STATE_RESET);
 	spin_lock_irqsave(&controller->lock, flags);
@@ -657,7 +647,7 @@ static int spi_qup_transfer_one(struct spi_master *master,
 		ret = controller->error;
 	spin_unlock_irqrestore(&controller->lock, flags);
 
-	if (ret && controller->use_dma)
+	if (ret && spi_qup_is_dma_xfer(controller->mode))
 		spi_qup_dma_terminate(master, xfer);
 
 	return ret;
@@ -668,26 +658,28 @@ static bool spi_qup_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_qup *qup = spi_master_get_devdata(master);
 	size_t dma_align = dma_get_cache_alignment();
-	u32 mode;
-
-	qup->use_dma = 0;
+	int n_words;
 
-	if (xfer->rx_buf && (xfer->len % qup->in_blk_sz ||
-	    IS_ERR_OR_NULL(master->dma_rx) ||
-	    !IS_ALIGNED((size_t)xfer->rx_buf, dma_align)))
-		return false;
+	if (xfer->rx_buf) {
+		if (!IS_ALIGNED((size_t)xfer->rx_buf, dma_align) ||
+		    IS_ERR_OR_NULL(master->dma_rx))
+			return false;
+		if (qup->qup_v1 && (xfer->len % qup->in_blk_sz))
+			return false;
+	}
 
-	if (xfer->tx_buf && (xfer->len % qup->out_blk_sz ||
-	    IS_ERR_OR_NULL(master->dma_tx) ||
-	    !IS_ALIGNED((size_t)xfer->tx_buf, dma_align)))
-		return false;
+	if (xfer->tx_buf) {
+		if (!IS_ALIGNED((size_t)xfer->tx_buf, dma_align) ||
+		    IS_ERR_OR_NULL(master->dma_tx))
+			return false;
+		if (qup->qup_v1 && (xfer->len % qup->out_blk_sz))
+			return false;
+	}
 
-	mode = spi_qup_get_mode(master, xfer);
-	if (mode == QUP_IO_M_MODE_FIFO)
+	n_words = xfer->len / DIV_ROUND_UP(xfer->bits_per_word, 8);
+	if (n_words <= (qup->in_fifo_sz / sizeof(u32)))
 		return false;
 
-	qup->use_dma = 1;
-
 	return true;
 }
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675481 — [PATCH v4 12/14] spi: qup: refactor spi_qup_prep_sg

Take specific sgl and nent to be prepared.  This is in
preparation for splitting DMA into multiple transacations, this
contains no code changes just refactoring.

Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 25 ++++++++++---------------
 1 file changed, 10 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 026f25e..2423ee5 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -382,26 +382,19 @@ static void spi_qup_write(struct spi_qup *controller)
 	} while (remainder);
 }
 
-static int spi_qup_prep_sg(struct spi_master *master, struct spi_transfer *xfer,
-			   enum dma_transfer_direction dir,
+static int spi_qup_prep_sg(struct spi_master *master, struct scatterlist *sgl,
+			   unsigned int nents, enum dma_transfer_direction dir,
 			   dma_async_tx_callback callback, void *data)
 {
 	unsigned long flags = DMA_PREP_INTERRUPT | DMA_PREP_FENCE;
 	struct dma_async_tx_descriptor *desc;
-	struct scatterlist *sgl;
 	struct dma_chan *chan;
 	dma_cookie_t cookie;
-	unsigned int nents;
 
-	if (dir == DMA_MEM_TO_DEV) {
+	if (dir == DMA_MEM_TO_DEV)
 		chan = master->dma_tx;
-		nents = xfer->tx_sg.nents;
-		sgl = xfer->tx_sg.sgl;
-	} else {
+	else
 		chan = master->dma_rx;
-		nents = xfer->rx_sg.nents;
-		sgl = xfer->rx_sg.sgl;
-	}
 
 	desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
 	if (IS_ERR_OR_NULL(desc))
@@ -444,8 +437,9 @@ static int spi_qup_do_dma(struct spi_device *spi, struct spi_transfer *xfer,
 	}
 
 	if (xfer->rx_buf) {
-		ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM,
-					spi_qup_dma_done, &qup->rxc);
+		ret = spi_qup_prep_sg(master, xfer->rx_sg.sgl,
+				      xfer->rx_sg.nents, DMA_DEV_TO_MEM,
+				      spi_qup_dma_done, &qup->rxc);
 		if (ret)
 			return ret;
 
@@ -453,8 +447,9 @@ static int spi_qup_do_dma(struct spi_device *spi, struct spi_transfer *xfer,
 	}
 
 	if (xfer->tx_buf) {
-		ret = spi_qup_prep_sg(master, xfer, DMA_MEM_TO_DEV,
-					spi_qup_dma_done, &qup->txc);
+		ret = spi_qup_prep_sg(master, xfer->tx_sg.sgl,
+				      xfer->tx_sg.nents, DMA_MEM_TO_DEV,
+				      spi_qup_dma_done, &qup->txc);
 		if (ret)
 			return ret;
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675483 — [PATCH v4 01/14] spi: qup: Enable chip select support

Enable chip select support for QUP versions later than v1.
The chip select support was broken in QUP version 1. Hence
the chip select support was removed earlier in commit
4a8573abe965115bc5b064401fd669b74e985258. Since the chip
select support is functional in recent versions of QUP,
re-enabling it for QUP versions later than v1.

Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 1bfa889..c0d4def 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -750,6 +750,24 @@ static int spi_qup_init_dma(struct spi_master *master, resource_size_t base)
 	return ret;
 }
 
+static void spi_qup_set_cs(struct spi_device *spi, bool val)
+{
+	struct spi_qup *controller;
+	u32 spi_ioc;
+	u32 spi_ioc_orig;
+
+	controller = spi_master_get_devdata(spi->master);
+	spi_ioc = readl_relaxed(controller->base + SPI_IO_CONTROL);
+	spi_ioc_orig = spi_ioc;
+	if (!val)
+		spi_ioc |= SPI_IO_C_FORCE_CS;
+	else
+		spi_ioc &= ~SPI_IO_C_FORCE_CS;
+
+	if (spi_ioc != spi_ioc_orig)
+		writel_relaxed(spi_ioc, controller->base + SPI_IO_CONTROL);
+}
+
 static int spi_qup_probe(struct platform_device *pdev)
 {
 	struct spi_master *master;
@@ -846,6 +864,9 @@ static int spi_qup_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
 		controller->qup_v1 = 1;
 
+	if (!controller->qup_v1)
+		master->set_cs = spi_qup_set_cs;
+
 	spin_lock_init(&controller->lock);
 	init_completion(&controller->done);
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [next] | [standalone]

#1675486 — [PATCH v4 05/14] spi: qup: Place the QUP in run mode before DMA

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/spi/spi-qup.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index d3ccf53..0683e47 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -336,6 +336,14 @@ static int spi_qup_do_dma(struct spi_master *master, struct spi_transfer *xfer,
 	struct spi_qup *qup = spi_master_get_devdata(master);
 	int ret;
 
+	/* before issuing the descriptors, set the QUP to run */
+	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+	if (ret) {
+		dev_warn(qup->dev, "%s(%d): cannot set RUN state\n",
+				__func__, __LINE__);
+		return ret;
+	}
+
 	if (xfer->rx_buf) {
 		ret = spi_qup_prep_sg(master, xfer, DMA_DEV_TO_MEM,
 					spi_qup_dma_done, &qup->rxc);
@@ -383,6 +391,13 @@ static int spi_qup_do_pio(struct spi_master *master, struct spi_transfer *xfer,
 
 	spi_qup_fifo_write(qup, xfer);
 
+	ret = spi_qup_set_state(qup, QUP_STATE_RUN);
+	if (ret) {
+		dev_warn(qup->dev, "%s(%d): cannot set RUN state\n",
+				__func__, __LINE__);
+		return ret;
+	}
+
 	if (!wait_for_completion_timeout(&qup->done, timeout))
 		return -ETIMEDOUT;
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web