Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1326556 > unrolled thread
| Started by | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| First post | 2016-02-04 11:10 +0100 |
| Last post | 2016-02-04 11:40 +0100 |
| Articles | 20 on this page of 51 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH v2 00/51] mtd: rework ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 17/51] mtd: onenand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 48/51] mtd: onenand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 49/51] staging: mt29f_spinand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 34/51] mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 29/51] mtd: nand: davinci: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 26/51] mtd: nand: bf5xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 31/51] mtd: nand: diskonchip: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 32/51] mtd: nand: docg4: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 24/51] mtd: nand: jz4740: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 38/51] mtd: nand: jz4780: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 40/51] mtd: nand: mxc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 35/51] mtd: nand: fsmc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 47/51] mtd: nand: vf610: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 46/51] mtd: nand: sunxi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 23/51] mtd: nand: sharpsl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 50/51] mtd: nand: kill the ecc->layout field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 39/51] mtd: nand: lpc32xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 30/51] mtd: nand: denali: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 33/51] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 44/51] mtd: nand: sh_flctl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 42/51] mtd: nand: pxa3xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 36/51] mtd: nand: gpmi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 41/51] mtd: nand: omap2: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 25/51] mtd: nand: atmel: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 19/51] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 02/51] mtd: create an mtd_oobavail() helper and make use of it Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 01/51] mtd: kill the ecclayout->oobavail field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 28/51] mtd: nand: cafe: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
Re: [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 08:40 +0100
Re: [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 10:30 +0100
[PATCH v2 15/51] mtd: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 08/51] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
Re: [PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate Robert Jarzmik <robert.jarzmik@free.fr> - 2016-02-06 23:00 +0100
[PATCH v2 14/51] mtd: add mtd_set_ecclayout() helper function Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 27/51] mtd: nand: brcm: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 10/51] mtd: nand: gpmi: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 13/51] mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 16/51] mtd: nand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 21/51] mtd: nand: implement the default mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 12/51] mtd: nand: omap2: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 11/51] mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 22/51] mtd: nand: bch: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 04/51] mtd: nand: simplify nand_bch_init() usage Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 03/51] mtd: mtdswap: remove useless if (!mtd->ecclayout) test Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 06/51] mtd: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
Re: [PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 10:40 +0100
[PATCH v2 09/51] mtd: nand: fsl_ifc: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
Page 1 of 3 [1] 2 3 Next page →
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:10 +0100 |
| Subject | [PATCH v2 00/51] mtd: rework ECC layout definition |
| Message-ID | <qYp1n-7ay-5@gated-at.bofh.it> |
Hello, This patchset aims at getting rid of the nand_ecclayout limitations. struct nand_ecclayout is defining fixed eccpos and oobfree arrays which can only be increased by modifying the MTD_MAX_ECCPOS_ENTRIES_LARGE and MTD_MAX_OOBFREE_ENTRIES_LARGE macros. This approach forces us to modify the macro values each time we add a new NAND chip with a bigger OOB area, and increasing these arrays also penalize all platforms, even those who only support small NAND devices (with small OOB area). The idea to overcome this limitation, is to define the ECC/OOB layout by the mean of two functions: ->ecc() and ->free(), which will basically return the same information has those stored in the nand_ecclayout struct. Another advantage of this solution is that ECC layouts are usually following a repetitive pattern (i.e. leave X bytes free and put Y bytes of ECC per ECC chunk), which allows one to implement the ->ecc() and ->free() functions with a simple logic that can be applied to any size of OOB. Patches 1 to 4 are just cleanups or trivial fixes that can be taken independently. Also note that the last two commits are removing the nand_ecclayout definition, thus preventing any new driver to use this structure. Of course, this step can be delayed if some of the previous patches are not accepted. Best Regards, Boris Changes since v1: - unified the way of defining ECC and free bytes - fixed a few bugs in some ->ecc()/->free() implementations - added new helpers to ease ECC and free bytes manipulation - separated driver changes in different commits to ease review - dropped already applied patches Boris Brezillon (51): mtd: kill the ecclayout->oobavail field mtd: create an mtd_oobavail() helper and make use of it mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: nand: simplify nand_bch_init() usage mtd: add mtd_ooblayout_xxx() helper functions mtd: use mtd_ooblayout_xxx() helpers where appropriate mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate mtd: nand: fsl_ifc: use mtd_ooblayout_xxx() helpers where appropriate mtd: nand: gpmi: use mtd_ooblayout_xxx() helpers where appropriate mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate mtd: nand: omap2: use mtd_ooblayout_xxx() helpers where appropriate mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate mtd: add mtd_set_ecclayout() helper function mtd: use mtd_set_ecclayout() where appropriate mtd: nand: use mtd_set_ecclayout() where appropriate mtd: onenand: use mtd_set_ecclayout() where appropriate mtd: docg3: use mtd_set_ecclayout() where appropriate mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition mtd: docg3: switch to mtd_ooblayout_ops mtd: nand: implement the default mtd_ooblayout_ops mtd: nand: bch: switch to mtd_ooblayout_ops mtd: nand: sharpsl: switch to mtd_ooblayout_ops mtd: nand: jz4740: switch to mtd_ooblayout_ops mtd: nand: atmel: switch to mtd_ooblayout_ops mtd: nand: bf5xx: switch to mtd_ooblayout_ops mtd: nand: brcm: switch to mtd_ooblayout_ops mtd: nand: cafe: switch to mtd_ooblayout_ops mtd: nand: davinci: switch to mtd_ooblayout_ops mtd: nand: denali: switch to mtd_ooblayout_ops mtd: nand: diskonchip: switch to mtd_ooblayout_ops mtd: nand: docg4: switch to mtd_ooblayout_ops mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops mtd: nand: fsmc: switch to mtd_ooblayout_ops mtd: nand: gpmi: switch to mtd_ooblayout_ops mtd: nand: hisi504: switch to mtd_ooblayout_ops mtd: nand: jz4780: switch to mtd_ooblayout_ops mtd: nand: lpc32xx: switch to mtd_ooblayout_ops mtd: nand: mxc: switch to mtd_ooblayout_ops mtd: nand: omap2: switch to mtd_ooblayout_ops mtd: nand: pxa3xx: switch to mtd_ooblayout_ops mtd: nand: s3c2410: switch to mtd_ooblayout_ops mtd: nand: sh_flctl: switch to mtd_ooblayout_ops mtd: nand: sm_common: switch to mtd_ooblayout_ops mtd: nand: sunxi: switch to mtd_ooblayout_ops mtd: nand: vf610: switch to mtd_ooblayout_ops mtd: onenand: switch to mtd_ooblayout_ops staging: mt29f_spinand: switch to mtd_ooblayout_ops mtd: nand: kill the ecc->layout field mtd: kill the nand_ecclayout struct arch/arm/mach-pxa/spitz.c | 55 +++- arch/mips/include/asm/mach-jz4740/jz4740_nand.h | 2 +- arch/mips/jz4740/board-qi_lb60.c | 87 +++--- drivers/mtd/devices/docg3.c | 43 ++- drivers/mtd/mtdchar.c | 123 ++++++-- drivers/mtd/mtdconcat.c | 2 +- drivers/mtd/mtdcore.c | 358 ++++++++++++++++++++++++ drivers/mtd/mtdpart.c | 28 +- drivers/mtd/mtdswap.c | 24 +- drivers/mtd/nand/atmel_nand.c | 120 ++++---- drivers/mtd/nand/bf5xx_nand.c | 51 ++-- drivers/mtd/nand/brcmnand/brcmnand.c | 262 ++++++++++------- drivers/mtd/nand/cafe_nand.c | 45 ++- drivers/mtd/nand/davinci_nand.c | 118 +++----- drivers/mtd/nand/denali.c | 51 +++- drivers/mtd/nand/diskonchip.c | 38 ++- drivers/mtd/nand/docg4.c | 34 ++- drivers/mtd/nand/fsl_elbc_nand.c | 83 +++--- drivers/mtd/nand/fsl_ifc_nand.c | 246 +++++----------- drivers/mtd/nand/fsmc_nand.c | 300 ++++++-------------- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 61 ++-- drivers/mtd/nand/hisi504_nand.c | 28 +- drivers/mtd/nand/jz4740_nand.c | 2 +- drivers/mtd/nand/jz4780_nand.c | 19 +- drivers/mtd/nand/lpc32xx_mlc.c | 50 ++-- drivers/mtd/nand/lpc32xx_slc.c | 58 +++- drivers/mtd/nand/mxc_nand.c | 212 +++++++------- drivers/mtd/nand/nand_base.c | 334 +++++++++++----------- drivers/mtd/nand/nand_bch.c | 46 ++- drivers/mtd/nand/omap2.c | 241 +++++++++------- drivers/mtd/nand/pxa3xx_nand.c | 104 ++++--- drivers/mtd/nand/s3c2410.c | 32 ++- drivers/mtd/nand/sh_flctl.c | 87 ++++-- drivers/mtd/nand/sharpsl.c | 2 +- drivers/mtd/nand/sm_common.c | 93 ++++-- drivers/mtd/nand/sunxi_nand.c | 114 ++++---- drivers/mtd/nand/vf610_nfc.c | 34 +-- drivers/mtd/onenand/onenand_base.c | 254 ++++++++--------- drivers/mtd/tests/oobtest.c | 49 ++-- drivers/staging/mt29f_spinand/mt29f_spinand.c | 49 ++-- fs/jffs2/wbuf.c | 6 +- include/linux/mtd/mtd.h | 69 ++++- include/linux/mtd/nand.h | 5 +- include/linux/mtd/nand_bch.h | 8 +- include/linux/mtd/onenand.h | 2 - include/linux/mtd/sharpsl.h | 2 +- include/uapi/mtd/mtd-abi.h | 2 +- 47 files changed, 2349 insertions(+), 1684 deletions(-) -- 2.1.4
[toc] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:10 +0100 |
| Subject | [PATCH v2 17/51] mtd: onenand: use mtd_set_ecclayout() where appropriate |
| Message-ID | <qYp1p-7ay-43@gated-at.bofh.it> |
| In reply to | #1326556 |
Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/mtd/onenand/onenand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 6906c95..1d8406d 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -3994,7 +3994,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) if (mtd->oobavail < 0) mtd->oobavail = 0; - mtd->ecclayout = this->ecclayout; + mtd_set_ecclayout(mtd, this->ecclayout); mtd->ecc_strength = 1; /* Fill in remaining MTD driver data */ -- 2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:10 +0100 |
| Subject | [PATCH v2 48/51] mtd: onenand: switch to mtd_ooblayout_ops |
| Message-ID | <qYp1p-7ay-45@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users. Modify the onenand drivers to switch to this
approach.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/onenand/onenand_base.c | 154 ++++++++++++++++++++++---------------
include/linux/mtd/onenand.h | 2 -
2 files changed, 92 insertions(+), 64 deletions(-)
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 1d8406d..a41cb4c 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -68,21 +68,33 @@ MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP"
* flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page
* For now, we expose only 64 out of 80 ecc bytes
*/
-static struct nand_ecclayout flexonenand_oob_128 = {
- .eccbytes = 64,
- .eccpos = {
- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 102, 103, 104, 105
- },
- .oobfree = {
- {2, 4}, {18, 4}, {34, 4}, {50, 4},
- {66, 4}, {82, 4}, {98, 4}, {114, 4}
- }
+static int flexonenand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 6;
+ oobregion->length = 10;
+
+ return 0;
+}
+
+static int flexonenand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 4;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops flexonenand_ooblayout_ops = {
+ .ecc = flexonenand_ooblayout_ecc,
+ .free = flexonenand_ooblayout_free,
};
/*
@@ -91,56 +103,75 @@ static struct nand_ecclayout flexonenand_oob_128 = {
* Based on specification:
* 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
*
- * For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout)
- *
* oobfree uses the spare area fields marked as
* "Managed by internal ECC logic for Logical Sector Number area"
*/
-static struct nand_ecclayout onenand_oob_128 = {
- .eccbytes = 64,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 103, 104, 105, 106, 107, 108, 109, 110, 111,
- 119
- },
- .oobfree = {
- {2, 3}, {18, 3}, {34, 3}, {50, 3},
- {66, 3}, {82, 3}, {98, 3}, {114, 3}
- }
+static int onenand_ooblayout_128_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 7;
+ oobregion->length = 9;
+
+ return 0;
+}
+
+static int onenand_ooblayout_128_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section >= 8)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops onenand_oob_128_ooblayout_ops = {
+ .ecc = onenand_ooblayout_128_ecc,
+ .free = onenand_ooblayout_128_free,
};
/**
- * onenand_oob_64 - oob info for large (2KB) page
+ * onenand_oob_32_64 - oob info for large (2KB) page
*/
-static struct nand_ecclayout onenand_oob_64 = {
- .eccbytes = 20,
- .eccpos = {
- 8, 9, 10, 11, 12,
- 24, 25, 26, 27, 28,
- 40, 41, 42, 43, 44,
- 56, 57, 58, 59, 60,
- },
- .oobfree = {
- {2, 3}, {14, 2}, {18, 3}, {30, 2},
- {34, 3}, {46, 2}, {50, 3}, {62, 2}
+static int onenand_ooblayout_32_64_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+ oobregion->length = 5;
+
+ return 0;
+}
+
+static int onenand_ooblayout_32_64_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ int sections = (mtd->oobsize / 32) * 2;
+
+ if (section >= sections)
+ return -ERANGE;
+
+ if (section & 1) {
+ oobregion->offset = ((section - 1) * 16) + 14;
+ oobregion->length = 2;
+ } else {
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 3;
}
-};
-/**
- * onenand_oob_32 - oob info for middle (1KB) page
- */
-static struct nand_ecclayout onenand_oob_32 = {
- .eccbytes = 10,
- .eccpos = {
- 8, 9, 10, 11, 12,
- 24, 25, 26, 27, 28,
- },
- .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
+ return 0;
+}
+
+const struct mtd_ooblayout_ops onenand_oob_32_64_ooblayout_ops = {
+ .ecc = onenand_ooblayout_32_64_ecc,
+ .free = onenand_ooblayout_32_64_free,
};
static const unsigned char ffchars[] = {
@@ -3956,22 +3987,22 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
switch (mtd->oobsize) {
case 128:
if (FLEXONENAND(this)) {
- this->ecclayout = &flexonenand_oob_128;
+ mtd_set_ooblayout(mtd, &flexonenand_ooblayout_ops);
mtd->subpage_sft = 0;
} else {
- this->ecclayout = &onenand_oob_128;
+ mtd_set_ooblayout(mtd, &onenand_oob_128_ooblayout_ops);
mtd->subpage_sft = 2;
}
if (ONENAND_IS_NOP_1(this))
mtd->subpage_sft = 0;
break;
case 64:
- this->ecclayout = &onenand_oob_64;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
mtd->subpage_sft = 2;
break;
case 32:
- this->ecclayout = &onenand_oob_32;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
mtd->subpage_sft = 1;
break;
@@ -3980,7 +4011,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
__func__, mtd->oobsize);
mtd->subpage_sft = 0;
/* To prevent kernel oops */
- this->ecclayout = &onenand_oob_32;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
break;
}
@@ -3994,7 +4025,6 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
if (mtd->oobavail < 0)
mtd->oobavail = 0;
- mtd_set_ecclayout(mtd, this->ecclayout);
mtd->ecc_strength = 1;
/* Fill in remaining MTD driver data */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 4596503..0aaa98b 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -80,7 +80,6 @@ struct onenand_bufferram {
* @page_buf: [INTERN] page main data buffer
* @oob_buf: [INTERN] page oob data buffer
* @subpagesize: [INTERN] holds the subpagesize
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbm: [REPLACEABLE] pointer to Bad Block Management
* @priv: [OPTIONAL] pointer to private chip date
*/
@@ -134,7 +133,6 @@ struct onenand_chip {
#endif
int subpagesize;
- struct nand_ecclayout *ecclayout;
void *bbm;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:10 +0100 |
| Subject | [PATCH v2 49/51] staging: mt29f_spinand: switch to mtd_ooblayout_ops |
| Message-ID | <qYp1p-7ay-51@gated-at.bofh.it> |
| In reply to | #1326556 |
Replace the nand_ecclayout definition by the equivalent mtd_ooblayout_ops
definition.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/staging/mt29f_spinand/mt29f_spinand.c | 48 +++++++++++++++++----------
1 file changed, 30 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c
index 6728376..04b711759 100644
--- a/drivers/staging/mt29f_spinand/mt29f_spinand.c
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c
@@ -42,23 +42,33 @@ static inline struct spinand_state *mtd_to_state(struct mtd_info *mtd)
static int enable_hw_ecc;
static int enable_read_hw_ecc;
-static struct nand_ecclayout spinand_oob_64 = {
- .eccbytes = 24,
- .eccpos = {
- 1, 2, 3, 4, 5, 6,
- 17, 18, 19, 20, 21, 22,
- 33, 34, 35, 36, 37, 38,
- 49, 50, 51, 52, 53, 54, },
- .oobfree = {
- {.offset = 8,
- .length = 8},
- {.offset = 24,
- .length = 8},
- {.offset = 40,
- .length = 8},
- {.offset = 56,
- .length = 8},
- }
+static int spinand_ooblayout_64_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 1;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static int spinand_ooblayout_64_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 8;
+ oobregion->length = 8;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops spinand_oob_64_ops = {
+ .ecc = spinand_ooblayout_64_ecc,
+ .free = spinand_ooblayout_64_free,
};
#endif
@@ -883,7 +893,6 @@ static int spinand_probe(struct spi_device *spi_nand)
chip->ecc.strength = 1;
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
- chip->ecc.layout = &spinand_oob_64;
chip->ecc.read_page = spinand_read_page_hwecc;
chip->ecc.write_page = spinand_write_page_hwecc;
#else
@@ -908,6 +917,9 @@ static int spinand_probe(struct spi_device *spi_nand)
mtd->dev.parent = &spi_nand->dev;
mtd->oobsize = 64;
+#ifdef CONFIG_MTD_SPINAND_ONDIEECC
+ mtd_set_ooblayout(mtd, &spinand_oob_64_ops);
+#endif
if (nand_scan(mtd, 1))
return -ENXIO;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 34/51] mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb3-7ep-1@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/fsl_ifc_nand.c | 232 ++++++++++++----------------------------
1 file changed, 67 insertions(+), 165 deletions(-)
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 2e970ac..9419fb1 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -67,136 +67,6 @@ struct fsl_ifc_nand_ctrl {
static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
-/* 512-byte page with 4-bit ECC, 8-bit */
-static struct nand_ecclayout oob_512_8bit_ecc4 = {
- .eccbytes = 8,
- .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
- .oobfree = { {0, 5}, {6, 2} },
-};
-
-/* 512-byte page with 4-bit ECC, 16-bit */
-static struct nand_ecclayout oob_512_16bit_ecc4 = {
- .eccbytes = 8,
- .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
- .oobfree = { {2, 6}, },
-};
-
-/* 2048-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_2048_ecc4 = {
- .eccbytes = 32,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- },
- .oobfree = { {2, 6}, {40, 24} },
-};
-
-/* 4096-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_4096_ecc4 = {
- .eccbytes = 64,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- },
- .oobfree = { {2, 6}, {72, 56} },
-};
-
-/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
-static struct nand_ecclayout oob_4096_ecc8 = {
- .eccbytes = 128,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- 72, 73, 74, 75, 76, 77, 78, 79,
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127,
- 128, 129, 130, 131, 132, 133, 134, 135,
- },
- .oobfree = { {2, 6}, {136, 82} },
-};
-
-/* 8192-byte page size with 4-bit ECC */
-static struct nand_ecclayout oob_8192_ecc4 = {
- .eccbytes = 128,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- 72, 73, 74, 75, 76, 77, 78, 79,
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127,
- 128, 129, 130, 131, 132, 133, 134, 135,
- },
- .oobfree = { {2, 6}, {136, 208} },
-};
-
-/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
-static struct nand_ecclayout oob_8192_ecc8 = {
- .eccbytes = 256,
- .eccpos = {
- 8, 9, 10, 11, 12, 13, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63,
- 64, 65, 66, 67, 68, 69, 70, 71,
- 72, 73, 74, 75, 76, 77, 78, 79,
- 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95,
- 96, 97, 98, 99, 100, 101, 102, 103,
- 104, 105, 106, 107, 108, 109, 110, 111,
- 112, 113, 114, 115, 116, 117, 118, 119,
- 120, 121, 122, 123, 124, 125, 126, 127,
- 128, 129, 130, 131, 132, 133, 134, 135,
- 136, 137, 138, 139, 140, 141, 142, 143,
- 144, 145, 146, 147, 148, 149, 150, 151,
- 152, 153, 154, 155, 156, 157, 158, 159,
- 160, 161, 162, 163, 164, 165, 166, 167,
- 168, 169, 170, 171, 172, 173, 174, 175,
- 176, 177, 178, 179, 180, 181, 182, 183,
- 184, 185, 186, 187, 188, 189, 190, 191,
- 192, 193, 194, 195, 196, 197, 198, 199,
- 200, 201, 202, 203, 204, 205, 206, 207,
- 208, 209, 210, 211, 212, 213, 214, 215,
- 216, 217, 218, 219, 220, 221, 222, 223,
- 224, 225, 226, 227, 228, 229, 230, 231,
- 232, 233, 234, 235, 236, 237, 238, 239,
- 240, 241, 242, 243, 244, 245, 246, 247,
- 248, 249, 250, 251, 252, 253, 254, 255,
- 256, 257, 258, 259, 260, 261, 262, 263,
- },
- .oobfree = { {2, 6}, {264, 80} },
-};
-
/*
* Generic flash bbt descriptors
*/
@@ -223,6 +93,58 @@ static struct nand_bbt_descr bbt_mirror_descr = {
.pattern = mirror_pattern,
};
+static int fsl_ifc_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 8;
+ oobregion->length = chip->ecc.bytes * chip->ecc.steps;
+
+ return 0;
+}
+
+static int fsl_ifc_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int eccbytes = chip->ecc.bytes * chip->ecc.steps;
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->writesize == 512 &&
+ !(chip->options & NAND_BUSWIDTH_16)) {
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ }
+
+ return 0;
+ }
+
+ if (!section) {
+ oobregion->offset = 2;
+ oobregion->length = 6;
+ } else {
+ oobregion->offset = eccbytes + 8;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_ifc_ooblayout_ops = {
+ .ecc = fsl_ifc_ooblayout_ecc,
+ .free = fsl_ifc_ooblayout_free,
+};
+
/*
* Set up the IFC hardware block and page address fields, and the ifc nand
* structure addr field to point to the correct IFC buffer in memory
@@ -812,8 +734,8 @@ static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
chip->ecc.bytes);
dev_dbg(priv->dev, "%s: nand->ecc.total = %d\n", __func__,
chip->ecc.total);
- dev_dbg(priv->dev, "%s: nand->ecc.layout = %p\n", __func__,
- chip->ecc.layout);
+ dev_dbg(priv->dev, "%s: mtd->ooblayout = %p\n", __func__,
+ mtd->ooblayout);
dev_dbg(priv->dev, "%s: mtd->flags = %08x\n", __func__, mtd->flags);
dev_dbg(priv->dev, "%s: mtd->size = %lld\n", __func__, mtd->size);
dev_dbg(priv->dev, "%s: mtd->erasesize = %d\n", __func__,
@@ -880,8 +802,6 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
struct nand_chip *chip = &priv->chip;
- struct mtd_info *mtd = nand_to_mtd(&priv->chip);
- struct nand_ecclayout *layout;
u32 csor;
/* Fill in fsl_ifc_mtd structure */
@@ -925,18 +845,9 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
csor = ifc_in32(&ifc->csor_cs[priv->bank].csor);
- /* Hardware generates ECC per 512 Bytes */
- chip->ecc.size = 512;
- chip->ecc.bytes = 8;
- chip->ecc.strength = 4;
-
switch (csor & CSOR_NAND_PGS_MASK) {
case CSOR_NAND_PGS_512:
- if (chip->options & NAND_BUSWIDTH_16) {
- layout = &oob_512_16bit_ecc4;
- } else {
- layout = &oob_512_8bit_ecc4;
-
+ if (!(chip->options & NAND_BUSWIDTH_16)) {
/* Avoid conflict with bad block marker */
bbt_main_descr.offs = 0;
bbt_mirror_descr.offs = 0;
@@ -946,35 +857,16 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
break;
case CSOR_NAND_PGS_2K:
- layout = &oob_2048_ecc4;
priv->bufnum_mask = 3;
break;
case CSOR_NAND_PGS_4K:
- if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
- CSOR_NAND_ECC_MODE_4) {
- layout = &oob_4096_ecc4;
- } else {
- layout = &oob_4096_ecc8;
- chip->ecc.bytes = 16;
- chip->ecc.strength = 8;
- }
-
priv->bufnum_mask = 1;
break;
case CSOR_NAND_PGS_8K:
- if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
- CSOR_NAND_ECC_MODE_4) {
- layout = &oob_8192_ecc4;
- } else {
- layout = &oob_8192_ecc8;
- chip->ecc.bytes = 16;
- chip->ecc.strength = 8;
- }
-
priv->bufnum_mask = 0;
- break;
+ break;
default:
dev_err(priv->dev, "bad csor %#x: bad page size\n", csor);
@@ -984,7 +876,17 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.layout = layout;
+ mtd_set_ooblayout(&priv->mtd, &fsl_ifc_ooblayout_ops);
+
+ /* Hardware generates ECC per 512 Bytes */
+ chip->ecc.size = 512;
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) == CSOR_NAND_ECC_MODE_4) {
+ chip->ecc.bytes = 8;
+ chip->ecc.strength = 4;
+ } else {
+ chip->ecc.bytes = 16;
+ chip->ecc.strength = 8;
+ }
} else {
chip->ecc.mode = NAND_ECC_SOFT;
}
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 29/51] mtd: nand: davinci: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb4-7ep-7@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/davinci_nand.c | 118 +++++++++++++++-------------------------
1 file changed, 44 insertions(+), 74 deletions(-)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8cb821b..fe3fd29 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -54,7 +54,6 @@
*/
struct davinci_nand_info {
struct nand_chip chip;
- struct nand_ecclayout ecclayout;
struct device *dev;
struct clk *clk;
@@ -480,63 +479,46 @@ static int nand_davinci_dev_ready(struct mtd_info *mtd)
* ten ECC bytes plus the manufacturer's bad block marker byte, and
* and not overlapping the default BBT markers.
*/
-static struct nand_ecclayout hwecc4_small = {
- .eccbytes = 10,
- .eccpos = { 0, 1, 2, 3, 4,
- /* offset 5 holds the badblock marker */
- 6, 7,
- 13, 14, 15, },
- .oobfree = {
- {.offset = 8, .length = 5, },
- {.offset = 16, },
- },
-};
+static int hwecc4_ooblayout_small_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 2)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else if (section == 1) {
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ } else {
+ oobregion->offset = 13;
+ oobregion->length = 3;
+ }
-/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_2048 = {
- .eccbytes = 40,
- .eccpos = {
- /* at the end of spare sector */
- 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
- 34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
- 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
- },
- .oobfree = {
- /* 2 bytes at offset 0 hold manufacturer badblock markers */
- {.offset = 2, .length = 22, },
- /* 5 bytes at offset 8 hold BBT markers */
- /* 8 bytes at offset 16 hold JFFS2 clean markers */
- },
-};
+ return 0;
+}
-/*
- * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash,
- * storing ten ECC bytes plus the manufacturer's bad block marker byte,
- * and not overlapping the default BBT markers.
- */
-static struct nand_ecclayout hwecc4_4096 = {
- .eccbytes = 80,
- .eccpos = {
- /* at the end of spare sector */
- 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
- 58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
- 68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
- 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
- 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
- 98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
- 108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
- 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
- },
- .oobfree = {
- /* 2 bytes at offset 0 hold manufacturer badblock markers */
- {.offset = 2, .length = 46, },
- /* 5 bytes at offset 8 hold BBT markers */
- /* 8 bytes at offset 16 hold JFFS2 clean markers */
- },
+static int hwecc4_ooblayout_small_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 8;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 16;
+ oobregion->length = mtd->oobsize - 16;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops hwecc4_small_ooblayout_ops = {
+ .ecc = hwecc4_ooblayout_small_ecc,
+ .free = hwecc4_ooblayout_small_free,
};
#if defined(CONFIG_OF)
@@ -805,26 +787,14 @@ static int nand_davinci_probe(struct platform_device *pdev)
* table marker fits in the free bytes.
*/
if (chunks == 1) {
- info->ecclayout = hwecc4_small;
- info->ecclayout.oobfree[1].length = mtd->oobsize - 16;
- goto syndrome_done;
- }
- if (chunks == 4) {
- info->ecclayout = hwecc4_2048;
+ mtd_set_ooblayout(mtd, &hwecc4_small_ooblayout_ops);
+ } else if (chunks == 4 || chunks == 8) {
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
- goto syndrome_done;
- }
- if (chunks == 8) {
- info->ecclayout = hwecc4_4096;
- info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
- goto syndrome_done;
+ } else {
+ ret = -EIO;
+ goto err;
}
-
- ret = -EIO;
- goto err;
-
-syndrome_done:
- info->chip.ecc.layout = &info->ecclayout;
}
ret = nand_scan_tail(mtd);
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 26/51] mtd: nand: bf5xx: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb4-7ep-11@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/bf5xx_nand.c | 51 ++++++++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 7f6b30e..b38f414 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -109,28 +109,33 @@ static const unsigned short bfin_nfc_pin_req[] =
0};
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-static struct nand_ecclayout bootrom_ecclayout = {
- .eccbytes = 24,
- .eccpos = {
- 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
- 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
- 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
- 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
- 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
- 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
- 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
- 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
- },
- .oobfree = {
- { 0x8 * 0 + 3, 5 },
- { 0x8 * 1 + 3, 5 },
- { 0x8 * 2 + 3, 5 },
- { 0x8 * 3 + 3, 5 },
- { 0x8 * 4 + 3, 5 },
- { 0x8 * 5 + 3, 5 },
- { 0x8 * 6 + 3, 5 },
- { 0x8 * 7 + 3, 5 },
- }
+static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = section * 8;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static int bootrom_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 8) + 3;
+ oobregion->length = 5;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = {
+ .ecc = bootrom_ooblayout_ecc,
+ .free = bootrom_ooblayout_free,
};
#endif
@@ -800,7 +805,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
/* setup hardware ECC data struct */
if (hardware_ecc) {
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
- chip->ecc.layout = &bootrom_ecclayout;
+ mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops);
#endif
chip->read_buf = bf5xx_nand_dma_read_buf;
chip->write_buf = bf5xx_nand_dma_write_buf;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 31/51] mtd: nand: diskonchip: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb4-7ep-19@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/diskonchip.c | 38 +++++++++++++++++++++++++++++++++-----
1 file changed, 33 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index f170f3c..9fb63b4 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -960,10 +960,38 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
* safer. The only problem with it is that any code that parses oobfree must
* be able to handle out-of-order segments.
*/
-static struct nand_ecclayout doc200x_oobinfo = {
- .eccbytes = 6,
- .eccpos = {0, 1, 2, 3, 4, 5},
- .oobfree = {{8, 8}, {6, 2}}
+static int doc200x_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 0;
+ oobregion->length = 6;
+
+ return 0;
+}
+
+static int doc200x_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 8;
+ oobregion->length = 8;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops doc200x_ooblayout_ops = {
+ .ecc = doc200x_ooblayout_ecc,
+ .free = doc200x_ooblayout_free,
};
/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
@@ -1537,6 +1565,7 @@ static int __init doc_probe(unsigned long physadr)
nand->bbt_md = nand->bbt_td + 1;
mtd->owner = THIS_MODULE;
+ mtd_set_ooblayout(mtd, &doc200x_ooblayout_ops);
nand_set_controller_data(nand, doc);
nand->select_chip = doc200x_select_chip;
@@ -1548,7 +1577,6 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.layout = &doc200x_oobinfo;
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 32/51] mtd: nand: docg4: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb4-7ep-17@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/docg4.c | 33 ++++++++++++++++++++++++++++-----
1 file changed, 28 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index fb46fd7..f5ca9a5 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -222,10 +222,33 @@ struct docg4_priv {
* Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14.
* Byte 15 (the last) is used by the driver as a "page written" flag.
*/
-static struct nand_ecclayout docg4_oobinfo = {
- .eccbytes = 9,
- .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
- .oobfree = { {.offset = 2, .length = 5} }
+static int docg4_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 7;
+ oobregion->length = 9;
+
+ return 0;
+}
+
+static int docg4_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 2;
+ oobregion->length = 5;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops docg4_ooblayout_ops = {
+ .ecc = docg4_ooblayout_ecc,
+ .free = docg4_ooblayout_free,
};
/*
@@ -1209,6 +1232,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
mtd->writesize = DOCG4_PAGE_SIZE;
mtd->erasesize = DOCG4_BLOCK_SIZE;
mtd->oobsize = DOCG4_OOB_SIZE;
+ mtd_set_ooblayout(mtd, &docg4_ooblayout_ops);
nand->chipsize = DOCG4_CHIP_SIZE;
nand->chip_shift = DOCG4_CHIP_SHIFT;
nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
@@ -1217,7 +1241,6 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
nand->pagemask = 0x3ffff;
nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
nand->badblockbits = 8;
- nand->ecc.layout = &docg4_oobinfo;
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = DOCG4_PAGE_SIZE;
nand->ecc.prepad = 8;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 24/51] mtd: nand: jz4740: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb4-7ep-21@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
arch/mips/include/asm/mach-jz4740/jz4740_nand.h | 2 +-
arch/mips/jz4740/board-qi_lb60.c | 87 +++++++++++++++----------
drivers/mtd/nand/jz4740_nand.c | 2 +-
3 files changed, 53 insertions(+), 38 deletions(-)
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
index 398733e..7f7b0fc 100644
--- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
@@ -27,7 +27,7 @@ struct jz_nand_platform_data {
unsigned char banks[JZ_NAND_NUM_BANKS];
- void (*ident_callback)(struct platform_device *, struct nand_chip *,
+ void (*ident_callback)(struct platform_device *, struct mtd_info *,
struct mtd_partition **, int *num_partitions);
};
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 934b15b..a1c1afb 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -50,20 +50,6 @@ static bool is_avt2;
#define QI_LB60_GPIO_KEYIN8 JZ_GPIO_PORTD(26)
/* NAND */
-static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
- .eccbytes = 36,
- .eccpos = {
- 6, 7, 8, 9, 10, 11, 12, 13,
- 14, 15, 16, 17, 18, 19, 20, 21,
- 22, 23, 24, 25, 26, 27, 28, 29,
- 30, 31, 32, 33, 34, 35, 36, 37,
- 38, 39, 40, 41
- },
- .oobfree = {
- { .offset = 2, .length = 4 },
- { .offset = 42, .length = 22 }
- },
-};
/* Early prototypes of the QI LB60 had only 1GB of NAND.
* In order to support these devices as well the partition and ecc layout is
@@ -86,25 +72,6 @@ static struct mtd_partition qi_lb60_partitions_1gb[] = {
},
};
-static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
- .eccbytes = 72,
- .eccpos = {
- 12, 13, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 23, 24, 25, 26, 27,
- 28, 29, 30, 31, 32, 33, 34, 35,
- 36, 37, 38, 39, 40, 41, 42, 43,
- 44, 45, 46, 47, 48, 49, 50, 51,
- 52, 53, 54, 55, 56, 57, 58, 59,
- 60, 61, 62, 63, 64, 65, 66, 67,
- 68, 69, 70, 71, 72, 73, 74, 75,
- 76, 77, 78, 79, 80, 81, 82, 83
- },
- .oobfree = {
- { .offset = 2, .length = 10 },
- { .offset = 84, .length = 44 },
- },
-};
-
static struct mtd_partition qi_lb60_partitions_2gb[] = {
{
.name = "NAND BOOT partition",
@@ -123,19 +90,67 @@ static struct mtd_partition qi_lb60_partitions_2gb[] = {
},
};
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 36;
+ oobregion->offset = 6;
+
+ if (mtd->oobsize == 128) {
+ oobregion->length *= 2;
+ oobregion->offset *= 2;
+ }
+
+ return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ int eccbytes = 36, eccoff = 6;
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->oobsize == 128) {
+ eccbytes *= 2;
+ eccoff *= 2;
+ }
+
+ if (!section) {
+ oobregion->offset = 2;
+ oobregion->length = eccoff - 2;
+ } else {
+ oobregion->offset = eccoff + eccbytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+ .ecc = qi_lb60_ooblayout_ecc,
+ .free = qi_lb60_ooblayout_free,
+};
+
static void qi_lb60_nand_ident(struct platform_device *pdev,
- struct nand_chip *chip, struct mtd_partition **partitions,
+ struct mtd_info *mtd, struct mtd_partition **partitions,
int *num_partitions)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
if (chip->page_shift == 12) {
- chip->ecc.layout = &qi_lb60_ecclayout_2gb;
*partitions = qi_lb60_partitions_2gb;
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
} else {
- chip->ecc.layout = &qi_lb60_ecclayout_1gb;
*partitions = qi_lb60_partitions_1gb;
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
}
+
+ mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
}
static struct jz_nand_platform_data qi_lb60_nand_pdata = {
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 673ceb2..df74408 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -476,7 +476,7 @@ static int jz_nand_probe(struct platform_device *pdev)
}
if (pdata && pdata->ident_callback) {
- pdata->ident_callback(pdev, chip, &pdata->partitions,
+ pdata->ident_callback(pdev, mtd, &pdata->partitions,
&pdata->num_partitions);
}
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 38/51] mtd: nand: jz4780: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-23@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/jz4780_nand.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
index e1c016c..b86a579 100644
--- a/drivers/mtd/nand/jz4780_nand.c
+++ b/drivers/mtd/nand/jz4780_nand.c
@@ -56,8 +56,6 @@ struct jz4780_nand_chip {
struct nand_chip chip;
struct list_head chip_list;
- struct nand_ecclayout ecclayout;
-
struct gpio_desc *busy_gpio;
struct gpio_desc *wp_gpio;
unsigned int reading: 1;
@@ -165,8 +163,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
- struct nand_ecclayout *layout = &nand->ecclayout;
- u32 start, i;
+ int eccbytes;
chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
(chip->ecc.strength / 8);
@@ -201,23 +198,17 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
- layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
+ eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
- if (layout->eccbytes > mtd->oobsize - 2) {
+ if (eccbytes > mtd->oobsize - 2) {
dev_err(dev,
"invalid ECC config: required %d ECC bytes, but only %d are available",
- layout->eccbytes, mtd->oobsize - 2);
+ eccbytes, mtd->oobsize - 2);
return -EINVAL;
}
- start = mtd->oobsize - layout->eccbytes;
- for (i = 0; i < layout->eccbytes; i++)
- layout->eccpos[i] = start + i;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
+ mtd->ooblayout = &nand_ooblayout_lp_ops;
- chip->ecc.layout = layout;
return 0;
}
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 40/51] mtd: nand: mxc: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-25@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/mxc_nand.c | 212 ++++++++++++++++++++++----------------------
1 file changed, 105 insertions(+), 107 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 854c832..628f834 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -149,7 +149,7 @@ struct mxc_nand_devtype_data {
int (*check_int)(struct mxc_nand_host *);
void (*irq_control)(struct mxc_nand_host *, int);
u32 (*get_ecc_status)(struct mxc_nand_host *);
- struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+ const struct mtd_ooblayout_ops *ooblayout;
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*correct_data)(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc);
@@ -200,73 +200,6 @@ struct mxc_nand_host {
struct mxc_nand_platform_data pdata;
};
-/* OOB placement block for use with hardware ecc generation */
-static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
- .eccbytes = 5,
- .eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {12, 4}, }
-};
-
-static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
- .eccbytes = 20,
- .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
- 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
- .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
-};
-
-/* OOB description for 512 byte pages with 16 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
- .eccbytes = 1 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15
- },
- .oobfree = {
- {.offset = 0, .length = 5}
- }
-};
-
-/* OOB description for 2048 byte pages with 64 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
- .eccbytes = 4 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7}
- }
-};
-
-/* OOB description for 4096 byte pages with 128 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_4k = {
- .eccbytes = 8 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 103, 104, 105, 106, 107, 108, 109, 110, 111,
- 119, 120, 121, 122, 123, 124, 125, 126, 127,
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7},
- {.offset = 64, .length = 7},
- {.offset = 80, .length = 7},
- {.offset = 96, .length = 7},
- {.offset = 112, .length = 7},
- }
-};
-
static const char * const part_probes[] = {
"cmdlinepart", "RedBoot", "ofpart", NULL };
@@ -942,6 +875,99 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
}
}
+static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 6;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = ((section - 1) * 16) +
+ nand_chip->ecc.bytes + 6;
+ if (section < nand_chip->ecc.steps)
+ oobregion->length = (section * 16) + 6 -
+ oobregion->offset;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v1_ooblayout_ops = {
+ .ecc = mxc_v1_ooblayout_ecc,
+ .free = mxc_v1_ooblayout_free,
+};
+
+static int mxc_v2_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * stepsize) + 7;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = section * stepsize;
+ oobregion->length = 7;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v2_ooblayout_ops = {
+ .ecc = mxc_v2_ooblayout_ecc,
+ .free = mxc_v2_ooblayout_free,
+};
+
/*
* v2 and v3 type controllers can do 4bit or 8bit ecc depending
* on how much oob the nand chip has. For 8bit ecc we need at least
@@ -959,23 +985,6 @@ static int get_eccsize(struct mtd_info *mtd)
return 8;
}
-static void ecc_8bit_layout_4k(struct nand_ecclayout *layout)
-{
- int i, j;
-
- layout->eccbytes = 8*18;
- for (i = 0; i < 8; i++)
- for (j = 0; j < 18; j++)
- layout->eccpos[i*18 + j] = i*26 + j + 7;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = 4;
- for (i = 1; i < 8; i++) {
- layout->oobfree[i].offset = i*26;
- layout->oobfree[i].length = 7;
- }
-}
-
static void preset_v1(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
@@ -1269,9 +1278,7 @@ static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 1,
@@ -1294,9 +1301,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 0,
@@ -1320,9 +1325,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v2,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_4k,
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v2,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1346,9 +1349,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1373,9 +1374,7 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1576,7 +1575,7 @@ static int mxcnd_probe(struct platform_device *pdev)
this->select_chip = host->devtype_data->select_chip;
this->ecc.size = 512;
- this->ecc.layout = host->devtype_data->ecclayout_512;
+ mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
@@ -1649,12 +1648,11 @@ static int mxcnd_probe(struct platform_device *pdev)
/* Call preset again, with correct writesize this time */
host->devtype_data->preset(mtd);
- if (mtd->writesize == 2048)
- this->ecc.layout = host->devtype_data->ecclayout_2k;
- else if (mtd->writesize == 4096) {
- this->ecc.layout = host->devtype_data->ecclayout_4k;
- if (get_eccsize(mtd) == 8)
- ecc_8bit_layout_4k(this->ecc.layout);
+ if (!this->ecc.bytes) {
+ if (host->eccsize == 8)
+ this->ecc.bytes = 18;
+ else if (host->eccsize == 4)
+ this->ecc.bytes = 9;
}
/*
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 35/51] mtd: nand: fsmc: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-27@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/fsmc_nand.c | 300 ++++++++++++-------------------------------
1 file changed, 84 insertions(+), 216 deletions(-)
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 1bdcd4f..d989acf 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -39,212 +39,6 @@
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
-static struct nand_ecclayout fsmc_ecc1_128_layout = {
- .eccbytes = 24,
- .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
- 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
- .oobfree = {
- {.offset = 8, .length = 8},
- {.offset = 24, .length = 8},
- {.offset = 40, .length = 8},
- {.offset = 56, .length = 8},
- {.offset = 72, .length = 8},
- {.offset = 88, .length = 8},
- {.offset = 104, .length = 8},
- {.offset = 120, .length = 8}
- }
-};
-
-static struct nand_ecclayout fsmc_ecc1_64_layout = {
- .eccbytes = 12,
- .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
- .oobfree = {
- {.offset = 8, .length = 8},
- {.offset = 24, .length = 8},
- {.offset = 40, .length = 8},
- {.offset = 56, .length = 8},
- }
-};
-
-static struct nand_ecclayout fsmc_ecc1_16_layout = {
- .eccbytes = 3,
- .eccpos = {2, 3, 4},
- .oobfree = {
- {.offset = 8, .length = 8},
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
- * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_256_layout = {
- .eccbytes = 208,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126,
- 130, 131, 132, 133, 134, 135, 136,
- 137, 138, 139, 140, 141, 142,
- 146, 147, 148, 149, 150, 151, 152,
- 153, 154, 155, 156, 157, 158,
- 162, 163, 164, 165, 166, 167, 168,
- 169, 170, 171, 172, 173, 174,
- 178, 179, 180, 181, 182, 183, 184,
- 185, 186, 187, 188, 189, 190,
- 194, 195, 196, 197, 198, 199, 200,
- 201, 202, 203, 204, 205, 206,
- 210, 211, 212, 213, 214, 215, 216,
- 217, 218, 219, 220, 221, 222,
- 226, 227, 228, 229, 230, 231, 232,
- 233, 234, 235, 236, 237, 238,
- 242, 243, 244, 245, 246, 247, 248,
- 249, 250, 251, 252, 253, 254
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 3},
- {.offset = 143, .length = 3},
- {.offset = 159, .length = 3},
- {.offset = 175, .length = 3},
- {.offset = 191, .length = 3},
- {.offset = 207, .length = 3},
- {.offset = 223, .length = 3},
- {.offset = 239, .length = 3},
- {.offset = 255, .length = 1}
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_224_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 97}
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_128_layout = {
- .eccbytes = 104,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- 66, 67, 68, 69, 70, 71, 72,
- 73, 74, 75, 76, 77, 78,
- 82, 83, 84, 85, 86, 87, 88,
- 89, 90, 91, 92, 93, 94,
- 98, 99, 100, 101, 102, 103, 104,
- 105, 106, 107, 108, 109, 110,
- 114, 115, 116, 117, 118, 119, 120,
- 121, 122, 123, 124, 125, 126
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 3},
- {.offset = 79, .length = 3},
- {.offset = 95, .length = 3},
- {.offset = 111, .length = 3},
- {.offset = 127, .length = 1}
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
- * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_64_layout = {
- .eccbytes = 52,
- .eccpos = { 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12, 13, 14,
- 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46,
- 50, 51, 52, 53, 54, 55, 56,
- 57, 58, 59, 60, 61, 62,
- },
- .oobfree = {
- {.offset = 15, .length = 3},
- {.offset = 31, .length = 3},
- {.offset = 47, .length = 3},
- {.offset = 63, .length = 1},
- }
-};
-
-/*
- * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
- * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
- * byte is free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_16_layout = {
- .eccbytes = 13,
- .eccpos = { 0, 1, 2, 3, 6, 7, 8,
- 9, 10, 11, 12, 13, 14
- },
- .oobfree = {
- {.offset = 15, .length = 1},
- }
-};
-
/*
* ECC placement definitions in oobfree type format.
* There are 13 bytes of ecc for every 512 byte block and it has to be read
@@ -274,6 +68,86 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = {
}
};
+static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int eccbytes = chip->ecc.bytes * chip->ecc.steps;
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 2;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobfree->offset = (section * 16) + 8;
+
+ if (section < chip->ecc.steps - 1)
+ oobfree->length = 8;
+ else
+ oobfree->length = mtd->oobsize - oobfree->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = {
+ .ecc = fsmc_ecc1_ooblayout_ecc,
+ .free = fsmc_ecc1_ooblayout_free,
+};
+
+static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int eccbytes = chip->ecc.bytes * chip->ecc.steps;
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobfree->length = chip->ecc.bytes;
+
+ if (!section && mtd->writesize <= 512)
+ oobfree->offset = 0;
+ else
+ oobfree->offset = (section * 16) + 2;
+
+ return 0;
+}
+
+static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
+
+ oobfree->offset = (section * 16) + 15;
+
+ if (section < chip->ecc.steps - 1)
+ oobfree->length = 3;
+ else
+ oobfree->length = mtd->oobsize - oobfree->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = {
+ .ecc = fsmc_ecc4_ooblayout_ecc,
+ .free = fsmc_ecc4_ooblayout_free,
+};
+
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
*
@@ -1084,23 +958,18 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (AMBA_REV_BITS(host->pid) >= 8) {
switch (mtd->oobsize) {
case 16:
- nand->ecc.layout = &fsmc_ecc4_16_layout;
host->ecc_place = &fsmc_ecc4_sp_place;
break;
case 64:
- nand->ecc.layout = &fsmc_ecc4_64_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
case 128:
- nand->ecc.layout = &fsmc_ecc4_128_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
case 224:
- nand->ecc.layout = &fsmc_ecc4_224_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
case 256:
- nand->ecc.layout = &fsmc_ecc4_256_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
break;
default:
@@ -1109,6 +978,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
ret = -EINVAL;
goto err_probe;
}
+
+ mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops);
} else {
switch (nand->ecc.mode) {
case NAND_ECC_HW:
@@ -1135,13 +1006,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
switch (mtd->oobsize) {
case 16:
- nand->ecc.layout = &fsmc_ecc1_16_layout;
- break;
case 64:
- nand->ecc.layout = &fsmc_ecc1_64_layout;
- break;
case 128:
- nand->ecc.layout = &fsmc_ecc1_128_layout;
+ mtd_set_ooblayout(mtd,
+ &fsmc_ecc1_ooblayout_ops);
break;
default:
dev_warn(&pdev->dev,
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 47/51] mtd: nand: vf610: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-33@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/vf610_nfc.c | 34 ++++------------------------------
1 file changed, 4 insertions(+), 30 deletions(-)
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 293feb1..da34de1 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -175,34 +175,6 @@ static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd)
return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip);
}
-static struct nand_ecclayout vf610_nfc_ecc45 = {
- .eccbytes = 45,
- .eccpos = {19, 20, 21, 22, 23,
- 24, 25, 26, 27, 28, 29, 30, 31,
- 32, 33, 34, 35, 36, 37, 38, 39,
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = {
- {.offset = 2,
- .length = 17} }
-};
-
-static struct nand_ecclayout vf610_nfc_ecc60 = {
- .eccbytes = 60,
- .eccpos = { 4, 5, 6, 7, 8, 9, 10, 11,
- 12, 13, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 23, 24, 25, 26, 27,
- 28, 29, 30, 31, 32, 33, 34, 35,
- 36, 37, 38, 39, 40, 41, 42, 43,
- 44, 45, 46, 47, 48, 49, 50, 51,
- 52, 53, 54, 55, 56, 57, 58, 59,
- 60, 61, 62, 63 },
- .oobfree = {
- {.offset = 2,
- .length = 2} }
-};
-
static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
{
return readl(nfc->regs + reg);
@@ -781,14 +753,16 @@ static int vf610_nfc_probe(struct platform_device *pdev)
if (mtd->oobsize > 64)
mtd->oobsize = 64;
+ /*
+ * mtd->ecclayout is not specified here because we're using the
+ * default large page ECC layout defined in NAND core.
+ */
if (chip->ecc.strength == 32) {
nfc->ecc_mode = ECC_60_BYTE;
chip->ecc.bytes = 60;
- chip->ecc.layout = &vf610_nfc_ecc60;
} else if (chip->ecc.strength == 24) {
nfc->ecc_mode = ECC_45_BYTE;
chip->ecc.bytes = 45;
- chip->ecc.layout = &vf610_nfc_ecc45;
} else {
dev_err(nfc->dev, "Unsupported ECC strength\n");
err = -ENXIO;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 46/51] mtd: nand: sunxi: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-35@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/sunxi_nand.c | 114 +++++++++++++++++++-----------------------
1 file changed, 52 insertions(+), 62 deletions(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index b5ea6b3..a32a894 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -212,12 +212,9 @@ struct sunxi_nand_chip_sel {
* sunxi HW ECC infos: stores information related to HW ECC support
*
* @mode: the sunxi ECC mode field deduced from ECC requirements
- * @layout: the OOB layout depending on the ECC requirements and the
- * selected ECC mode
*/
struct sunxi_nand_hw_ecc {
int mode;
- struct nand_ecclayout layout;
};
/*
@@ -1257,6 +1254,57 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
return sunxi_nand_chip_set_timings(chip, timings);
}
+static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+ if (section >= ecc->steps)
+ return -ERANGE;
+
+ oobregion->offset = section * (ecc->bytes + 4) + 4;
+ oobregion->length = ecc->bytes;
+
+ return 0;
+}
+
+static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+ if (section > ecc->steps)
+ return -ERANGE;
+
+ /*
+ * The first 2 bytes are used for BB markers, hence we
+ * only have 2 bytes available in the first user data
+ * section.
+ */
+ if (!section && ecc->mode == NAND_ECC_HW) {
+ oobregion->offset = 2;
+ oobregion->length = 2;
+
+ return 0;
+ }
+
+ oobregion->offset = section * (ecc->bytes + 4);
+
+ if (section < ecc->steps)
+ oobregion->length = 4;
+ else
+ oobregion->offset = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops sunxi_nand_ooblayout_ops = {
+ .ecc = sunxi_nand_ooblayout_ecc,
+ .free = sunxi_nand_ooblayout_free,
+};
+
static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
@@ -1266,7 +1314,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
struct sunxi_nand_hw_ecc *data;
- struct nand_ecclayout *layout;
int nsectors;
int ret;
int i;
@@ -1295,7 +1342,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
/* HW ECC always work with even numbers of ECC bytes */
ecc->bytes = ALIGN(ecc->bytes, 2);
- layout = &data->layout;
nsectors = mtd->writesize / ecc->size;
if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) {
@@ -1303,9 +1349,7 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
goto err;
}
- layout->eccbytes = (ecc->bytes * nsectors);
-
- ecc->layout = layout;
+ mtd_set_ooblayout(mtd, &sunxi_nand_ooblayout_ops);
ecc->priv = data;
return 0;
@@ -1325,9 +1369,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
{
- struct nand_ecclayout *layout;
- int nsectors;
- int i, j;
int ret;
ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1336,40 +1377,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
ecc->read_page = sunxi_nfc_hw_ecc_read_page;
ecc->write_page = sunxi_nfc_hw_ecc_write_page;
- layout = ecc->layout;
- nsectors = mtd->writesize / ecc->size;
-
- for (i = 0; i < nsectors; i++) {
- if (i) {
- layout->oobfree[i].offset =
- layout->oobfree[i - 1].offset +
- layout->oobfree[i - 1].length +
- ecc->bytes;
- layout->oobfree[i].length = 4;
- } else {
- /*
- * The first 2 bytes are used for BB markers, hence we
- * only have 2 bytes available in the first user data
- * section.
- */
- layout->oobfree[i].length = 2;
- layout->oobfree[i].offset = 2;
- }
-
- for (j = 0; j < ecc->bytes; j++)
- layout->eccpos[(ecc->bytes * i) + j] =
- layout->oobfree[i].offset +
- layout->oobfree[i].length + j;
- }
-
- if (mtd->oobsize > (ecc->bytes + 4) * nsectors) {
- layout->oobfree[nsectors].offset =
- layout->oobfree[nsectors - 1].offset +
- layout->oobfree[nsectors - 1].length +
- ecc->bytes;
- layout->oobfree[nsectors].length = mtd->oobsize -
- ((ecc->bytes + 4) * nsectors);
- }
return 0;
}
@@ -1378,9 +1385,6 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
{
- struct nand_ecclayout *layout;
- int nsectors;
- int i;
int ret;
ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1391,15 +1395,6 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page;
ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page;
- layout = ecc->layout;
- nsectors = mtd->writesize / ecc->size;
-
- for (i = 0; i < (ecc->bytes * nsectors); i++)
- layout->eccpos[i] = i;
-
- layout->oobfree[0].length = mtd->oobsize - i;
- layout->oobfree[0].offset = i;
-
return 0;
}
@@ -1411,7 +1406,6 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc);
break;
case NAND_ECC_NONE:
- kfree(ecc->layout);
default:
break;
}
@@ -1445,10 +1439,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
return ret;
break;
case NAND_ECC_NONE:
- ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL);
- if (!ecc->layout)
- return -ENOMEM;
- ecc->layout->oobfree[0].length = mtd->oobsize;
case NAND_ECC_SOFT:
break;
default:
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 23/51] mtd: nand: sharpsl: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-29@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
arch/arm/mach-pxa/spitz.c | 55 ++++++++++++++++++++++++++++++++++++---------
drivers/mtd/nand/sharpsl.c | 2 +-
include/linux/mtd/sharpsl.h | 2 +-
3 files changed, 47 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 825f903..9050a1b 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -763,14 +763,49 @@ static struct nand_bbt_descr spitz_nand_bbt = {
.pattern = scan_ff_pattern
};
-static struct nand_ecclayout akita_oobinfo = {
- .oobfree = { {0x08, 0x09} },
- .eccbytes = 24,
- .eccpos = {
- 0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
- 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
- },
+static int akita_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 12)
+ return -ERANGE;
+
+ switch (section % 3) {
+ case 0:
+ oobregion->offset = 5;
+ oobregion->length = 1;
+ break;
+
+ case 1:
+ oobregion->offset = 1;
+ oobregion->length = 3;
+ break;
+
+ case 2:
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ break;
+ }
+
+ oobregion->offset += (section / 3) * 0x10;
+
+ return 0;
+}
+
+static int akita_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobfree->offset = 8;
+ oobfree->length = 9;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops akita_ooblayout_ops = {
+ .eccpos = akita_ooblayout_ecc,
+ .oobfree = akita_ooblayout_free,
};
static struct sharpsl_nand_platform_data spitz_nand_pdata = {
@@ -804,11 +839,11 @@ static void __init spitz_nand_init(void)
} else if (machine_is_akita()) {
spitz_nand_partitions[1].size = 58 * 1024 * 1024;
spitz_nand_bbt.len = 1;
- spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
} else if (machine_is_borzoi()) {
spitz_nand_partitions[1].size = 32 * 1024 * 1024;
spitz_nand_bbt.len = 1;
- spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+ spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
}
platform_device_register(&spitz_nand_device);
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index b7d1b55..064ca17 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -148,6 +148,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
/* Link the private data with the MTD structure */
mtd = nand_to_mtd(this);
mtd->dev.parent = &pdev->dev;
+ mtd_set_ooblayout(mtd, data->ecc_layout);
platform_set_drvdata(pdev, sharpsl);
@@ -170,7 +171,6 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
this->ecc.bytes = 3;
this->ecc.strength = 1;
this->badblock_pattern = data->badblock_pattern;
- this->ecc.layout = data->ecc_layout;
this->ecc.hwctl = sharpsl_nand_enable_hwecc;
this->ecc.calculate = sharpsl_nand_calculate_ecc;
this->ecc.correct = nand_correct_data;
diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h
index 25f4d2a..65e91d0 100644
--- a/include/linux/mtd/sharpsl.h
+++ b/include/linux/mtd/sharpsl.h
@@ -14,7 +14,7 @@
struct sharpsl_nand_platform_data {
struct nand_bbt_descr *badblock_pattern;
- struct nand_ecclayout *ecc_layout;
+ const struct mtd_ooblayout_ops *ecc_layout;
struct mtd_partition *partitions;
unsigned int nr_partitions;
};
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 50/51] mtd: nand: kill the ecc->layout field |
| Message-ID | <qYpb5-7ep-37@gated-at.bofh.it> |
| In reply to | #1326556 |
Now that all NAND drivers have switch to mtd_ooblayout_ops, we can kill
the ecc->layout field.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/nand_base.c | 8 --------
drivers/mtd/nand/nand_bch.c | 9 ---------
include/linux/mtd/nand.h | 2 --
3 files changed, 19 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index e4dc62b..9f6b7609 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4161,13 +4161,6 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
- * Set the provided ECC layout. If ecc->layout is NULL, the MTD core
- * will just leave mtd->ooblayout to NULL, if it's not NULL, it will
- * set ->ooblayout to the default ecclayout wrapper.
- */
- mtd_set_ecclayout(mtd, ecc->layout);
-
- /*
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
@@ -4412,7 +4405,6 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->writebufsize = mtd->writesize;
/* propagate ecc info to mtd_info */
- mtd_set_ecclayout(mtd, ecc->layout);
mtd->ecc_strength = ecc->strength;
mtd->ecc_step_size = ecc->size;
/*
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index e29e75f..ca9b2a4 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -158,15 +158,6 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
eccsteps = mtd->writesize/eccsize;
- /*
- * Rely on the default ecclayout to ooblayout wrapper provided by MTD
- * core if ecc.layout is not NULL.
- * FIXME: this should be removed when all callers have moved to the
- * mtd_ooblayout_ops approach.
- */
- if (nand->ecc.layout)
- mtd_set_ecclayout(mtd, nand->ecc.layout);
-
/* if no ecc placement scheme was provided, build one */
if (!mtd->ooblayout) {
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 82a005a..fdcc2b8 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -466,7 +466,6 @@ struct nand_hw_control {
* @prepad: padding information for syndrome based ECC generators
* @postpad: padding information for syndrome based ECC generators
* @options: ECC specific options (see NAND_ECC_XXX flags defined above)
- * @layout: ECC layout control struct pointer
* @priv: pointer to private ECC control data
* @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
@@ -516,7 +515,6 @@ struct nand_ecc_ctrl {
int prepad;
int postpad;
unsigned int options;
- struct nand_ecclayout *layout;
void *priv;
void (*hwctl)(struct mtd_info *mtd, int mode);
int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 39/51] mtd: nand: lpc32xx: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-41@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/lpc32xx_mlc.c | 50 ++++++++++++++++++++++++++++--------------
drivers/mtd/nand/lpc32xx_slc.c | 41 +++++++++++++++++++++++++++-------
2 files changed, 66 insertions(+), 25 deletions(-)
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index d8c3e7a..f668282 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -139,22 +139,37 @@ struct lpc32xx_nand_cfg_mlc {
unsigned num_parts;
};
-static struct nand_ecclayout lpc32xx_nand_oob = {
- .eccbytes = 40,
- .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
- .oobfree = {
- { .offset = 0,
- .length = 6, },
- { .offset = 16,
- .length = 6, },
- { .offset = 32,
- .length = 6, },
- { .offset = 48,
- .length = 6, },
- },
+static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = ((section + 1) * 16) - nand_chip->ecc.bytes;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = 16 * section;
+ oobregion->length = 16 - nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = {
+ .ecc = lpc32xx_ooblayout_ecc,
+ .free = lpc32xx_ooblayout_free,
};
static struct nand_bbt_descr lpc32xx_nand_bbt = {
@@ -713,6 +728,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
nand_chip->ecc.write_oob = lpc32xx_write_oob;
nand_chip->ecc.read_oob = lpc32xx_read_oob;
nand_chip->ecc.strength = 4;
+ nand_chip->ecc.bytes = 10;
nand_chip->waitfunc = lpc32xx_waitfunc;
nand_chip->options = NAND_NO_SUBPAGE_WRITE;
@@ -751,7 +767,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
- nand_chip->ecc.layout = &lpc32xx_nand_oob;
+ mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
/* initially clear interrupt status */
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 10cf8e62..219dd67 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -146,13 +146,38 @@
* NAND ECC Layout for small page NAND devices
* Note: For large and huge page devices, the default layouts are used
*/
-static struct nand_ecclayout lpc32xx_nand_oob_16 = {
- .eccbytes = 6,
- .eccpos = {10, 11, 12, 13, 14, 15},
- .oobfree = {
- { .offset = 0, .length = 4 },
- { .offset = 6, .length = 4 },
- },
+static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 6;
+ oobregion->offset = 10;
+
+ return 0;
+}
+
+static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ oobregion->length = 4;
+ } else {
+ oobregion->offset = 6;
+ oobregion->length = 4;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = {
+ .ecc = lpc32xx_ooblayout_ecc,
+ .free = lpc32xx_ooblayout_free,
};
static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -886,7 +911,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
* custom BBT marker layout.
*/
if (mtd->writesize <= 512)
- chip->ecc.layout = &lpc32xx_nand_oob_16;
+ mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
/* These sizes remain the same regardless of page size */
chip->ecc.size = 256;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 30/51] mtd: nand: denali: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb5-7ep-43@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/denali.c | 51 +++++++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 15 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 30bf5f6..b832375 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1374,13 +1374,42 @@ static void denali_hw_init(struct denali_nand_info *denali)
* correction
*/
#define ECC_8BITS 14
-static struct nand_ecclayout nand_8bit_oob = {
- .eccbytes = 14,
-};
-
#define ECC_15BITS 26
-static struct nand_ecclayout nand_15bit_oob = {
- .eccbytes = 26,
+
+static int denali_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = denali->bbtskipbytes;
+ oobregion->length = chip->ecc.bytes * chip->ecc.steps;
+
+ return 0;
+}
+
+static int denali_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int eccbytes = chip->ecc.bytes * chip->ecc.steps;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = eccbytes + denali->bbtskipbytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops denali_ooblayout_ops = {
+ .ecc = denali_ooblayout_ecc,
+ .free = denali_ooblayout_free,
};
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
@@ -1561,7 +1590,6 @@ int denali_init(struct denali_nand_info *denali)
ECC_SECTOR_SIZE)))) {
/* if MLC OOB size is large enough, use 15bit ECC*/
denali->nand.ecc.strength = 15;
- denali->nand.ecc.layout = &nand_15bit_oob;
denali->nand.ecc.bytes = ECC_15BITS;
iowrite32(15, denali->flash_reg + ECC_CORRECTION);
} else if (mtd->oobsize < (denali->bbtskipbytes +
@@ -1571,20 +1599,13 @@ int denali_init(struct denali_nand_info *denali)
goto failed_req_irq;
} else {
denali->nand.ecc.strength = 8;
- denali->nand.ecc.layout = &nand_8bit_oob;
denali->nand.ecc.bytes = ECC_8BITS;
iowrite32(8, denali->flash_reg + ECC_CORRECTION);
}
+ mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
denali->nand.ecc.bytes *= denali->devnum;
denali->nand.ecc.strength *= denali->devnum;
- denali->nand.ecc.layout->eccbytes *=
- mtd->writesize / ECC_SECTOR_SIZE;
- denali->nand.ecc.layout->oobfree[0].offset =
- denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
- denali->nand.ecc.layout->oobfree[0].length =
- mtd->oobsize - denali->nand.ecc.layout->eccbytes -
- denali->bbtskipbytes;
/*
* Let driver know the total blocks number and how many blocks
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Date | 2016-02-04 11:20 +0100 |
| Subject | [PATCH v2 33/51] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops |
| Message-ID | <qYpb6-7ep-47@gated-at.bofh.it> |
| In reply to | #1326556 |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/fsl_elbc_nand.c | 83 +++++++++++++++++++++++-----------------
1 file changed, 47 insertions(+), 36 deletions(-)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 059d5f7..487eae0 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -79,32 +79,53 @@ struct fsl_elbc_fcm_ctrl {
/* These map to the positions used by the FCM hardware ECC generator */
-/* Small Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
- .eccbytes = 3,
- .eccpos = {6, 7, 8},
- .oobfree = { {0, 5}, {9, 7} },
-};
+static int fsl_elbc_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
-/* Small Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
- .eccbytes = 3,
- .eccpos = {8, 9, 10},
- .oobfree = { {0, 5}, {6, 2}, {11, 5} },
-};
+ if (section >= chip->ecc.steps)
+ return -ERANGE;
-/* Large Page FLASH with FMR[ECCM] = 0 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
- .eccbytes = 12,
- .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
- .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-};
+ oobregion->offset = (16 * section) + 6;
+ if (priv->fmr & FMR_ECCM)
+ oobregion->offset += 2;
-/* Large Page FLASH with FMR[ECCM] = 1 */
-static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
- .eccbytes = 12,
- .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
- .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+ oobregion->length = chip->ecc.bytes;
+
+ return 0;
+}
+
+static int fsl_elbc_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
+
+ if (section > chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ if (mtd->writesize > 512)
+ oobregion->offset++;
+ oobregion->length = (priv->fmr & FMR_ECCM) ? 7 : 5;
+ } else {
+ oobregion->offset = (16 * section) -
+ ((priv->fmr & FMR_ECCM) ? 5 : 7);
+ if (section < chip->ecc.steps)
+ oobregion->length = 13;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fsl_elbc_ooblayout_ops = {
+ .ecc = fsl_elbc_ooblayout_ecc,
+ .free = fsl_elbc_ooblayout_free,
};
/*
@@ -657,8 +678,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
chip->ecc.bytes);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
chip->ecc.total);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
- chip->ecc.layout);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->ooblayout = %p\n",
+ mtd->ooblayout);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
@@ -675,14 +696,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
} else if (mtd->writesize == 2048) {
priv->page_size = 1;
setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
- /* adjust ecc setup if needed */
- if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
- BR_DECC_CHK_GEN) {
- chip->ecc.size = 512;
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_lp_eccm1 :
- &fsl_elbc_oob_lp_eccm0;
- }
} else {
dev_err(priv->dev,
"fsl_elbc_init: page size %d is not supported\n",
@@ -780,9 +793,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
chip->ecc.mode = NAND_ECC_HW;
- /* put in small page settings and adjust later if needed */
- chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
- &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
+ mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
Page 1 of 3 [1] 2 3 Next page →
Back to top | Article view | linux.kernel
csiph-web