Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1326564
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v2 26/51] mtd: nand: bf5xx: switch to mtd_ooblayout_ops |
| Date | 2016-02-04 11:20 +0100 |
| Message-ID | <qYpb4-7ep-11@gated-at.bofh.it> (permalink) |
| References | <qYp1n-7ay-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/bf5xx_nand.c | 51 ++++++++++++++++++++++++-------------------
1 file changed, 28 insertions(+), 23 deletions(-)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 7f6b30e..b38f414 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -109,28 +109,33 @@ static const unsigned short bfin_nfc_pin_req[] =
0};
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-static struct nand_ecclayout bootrom_ecclayout = {
- .eccbytes = 24,
- .eccpos = {
- 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
- 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
- 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
- 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
- 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
- 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
- 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
- 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
- },
- .oobfree = {
- { 0x8 * 0 + 3, 5 },
- { 0x8 * 1 + 3, 5 },
- { 0x8 * 2 + 3, 5 },
- { 0x8 * 3 + 3, 5 },
- { 0x8 * 4 + 3, 5 },
- { 0x8 * 5 + 3, 5 },
- { 0x8 * 6 + 3, 5 },
- { 0x8 * 7 + 3, 5 },
- }
+static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = section * 8;
+ oobregion->length = 3;
+
+ return 0;
+}
+
+static int bootrom_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobregion->offset = (section * 8) + 3;
+ oobregion->length = 5;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = {
+ .ecc = bootrom_ooblayout_ecc,
+ .free = bootrom_ooblayout_free,
};
#endif
@@ -800,7 +805,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
/* setup hardware ECC data struct */
if (hardware_ecc) {
#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
- chip->ecc.layout = &bootrom_ecclayout;
+ mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops);
#endif
chip->read_buf = bf5xx_nand_dma_read_buf;
chip->write_buf = bf5xx_nand_dma_write_buf;
--
2.1.4
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v2 00/51] mtd: rework ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 17/51] mtd: onenand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 48/51] mtd: onenand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 49/51] staging: mt29f_spinand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 34/51] mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 29/51] mtd: nand: davinci: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 26/51] mtd: nand: bf5xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 31/51] mtd: nand: diskonchip: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 32/51] mtd: nand: docg4: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 24/51] mtd: nand: jz4740: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 38/51] mtd: nand: jz4780: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 40/51] mtd: nand: mxc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 35/51] mtd: nand: fsmc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 47/51] mtd: nand: vf610: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 46/51] mtd: nand: sunxi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 23/51] mtd: nand: sharpsl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 50/51] mtd: nand: kill the ecc->layout field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 39/51] mtd: nand: lpc32xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 30/51] mtd: nand: denali: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 33/51] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 44/51] mtd: nand: sh_flctl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 42/51] mtd: nand: pxa3xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 36/51] mtd: nand: gpmi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 41/51] mtd: nand: omap2: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 25/51] mtd: nand: atmel: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 19/51] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 02/51] mtd: create an mtd_oobavail() helper and make use of it Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 01/51] mtd: kill the ecclayout->oobavail field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 28/51] mtd: nand: cafe: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
Re: [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 08:40 +0100
Re: [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 10:30 +0100
[PATCH v2 15/51] mtd: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 08/51] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
Re: [PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate Robert Jarzmik <robert.jarzmik@free.fr> - 2016-02-06 23:00 +0100
[PATCH v2 14/51] mtd: add mtd_set_ecclayout() helper function Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 27/51] mtd: nand: brcm: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 10/51] mtd: nand: gpmi: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 13/51] mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 16/51] mtd: nand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 21/51] mtd: nand: implement the default mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 12/51] mtd: nand: omap2: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 11/51] mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 22/51] mtd: nand: bch: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 04/51] mtd: nand: simplify nand_bch_init() usage Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 03/51] mtd: mtdswap: remove useless if (!mtd->ecclayout) test Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 06/51] mtd: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
Re: [PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 10:40 +0100
[PATCH v2 09/51] mtd: nand: fsl_ifc: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
csiph-web