Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1326569
| From | Boris Brezillon <boris.brezillon@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v2 40/51] mtd: nand: mxc: switch to mtd_ooblayout_ops |
| Date | 2016-02-04 11:20 +0100 |
| Message-ID | <qYpb5-7ep-25@gated-at.bofh.it> (permalink) |
| References | <qYp1n-7ay-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/mxc_nand.c | 212 ++++++++++++++++++++++----------------------
1 file changed, 105 insertions(+), 107 deletions(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 854c832..628f834 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -149,7 +149,7 @@ struct mxc_nand_devtype_data {
int (*check_int)(struct mxc_nand_host *);
void (*irq_control)(struct mxc_nand_host *, int);
u32 (*get_ecc_status)(struct mxc_nand_host *);
- struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+ const struct mtd_ooblayout_ops *ooblayout;
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*correct_data)(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc);
@@ -200,73 +200,6 @@ struct mxc_nand_host {
struct mxc_nand_platform_data pdata;
};
-/* OOB placement block for use with hardware ecc generation */
-static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
- .eccbytes = 5,
- .eccpos = {6, 7, 8, 9, 10},
- .oobfree = {{0, 5}, {12, 4}, }
-};
-
-static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
- .eccbytes = 20,
- .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
- 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
- .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
-};
-
-/* OOB description for 512 byte pages with 16 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
- .eccbytes = 1 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15
- },
- .oobfree = {
- {.offset = 0, .length = 5}
- }
-};
-
-/* OOB description for 2048 byte pages with 64 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
- .eccbytes = 4 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7}
- }
-};
-
-/* OOB description for 4096 byte pages with 128 byte OOB */
-static struct nand_ecclayout nandv2_hw_eccoob_4k = {
- .eccbytes = 8 * 9,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 103, 104, 105, 106, 107, 108, 109, 110, 111,
- 119, 120, 121, 122, 123, 124, 125, 126, 127,
- },
- .oobfree = {
- {.offset = 2, .length = 4},
- {.offset = 16, .length = 7},
- {.offset = 32, .length = 7},
- {.offset = 48, .length = 7},
- {.offset = 64, .length = 7},
- {.offset = 80, .length = 7},
- {.offset = 96, .length = 7},
- {.offset = 112, .length = 7},
- }
-};
-
static const char * const part_probes[] = {
"cmdlinepart", "RedBoot", "ofpart", NULL };
@@ -942,6 +875,99 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
}
}
+static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * 16) + 6;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = ((section - 1) * 16) +
+ nand_chip->ecc.bytes + 6;
+ if (section < nand_chip->ecc.steps)
+ oobregion->length = (section * 16) + 6 -
+ oobregion->offset;
+ else
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v1_ooblayout_ops = {
+ .ecc = mxc_v1_ooblayout_ecc,
+ .free = mxc_v1_ooblayout_free,
+};
+
+static int mxc_v2_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = (section * stepsize) + 7;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+ int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
+
+ if (section > nand_chip->ecc.steps)
+ return -ERANGE;
+
+ if (!section) {
+ if (mtd->writesize <= 512) {
+ oobregion->offset = 0;
+ oobregion->length = 5;
+ } else {
+ oobregion->offset = 2;
+ oobregion->length = 4;
+ }
+ } else {
+ oobregion->offset = section * stepsize;
+ oobregion->length = 7;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops mxc_v2_ooblayout_ops = {
+ .ecc = mxc_v2_ooblayout_ecc,
+ .free = mxc_v2_ooblayout_free,
+};
+
/*
* v2 and v3 type controllers can do 4bit or 8bit ecc depending
* on how much oob the nand chip has. For 8bit ecc we need at least
@@ -959,23 +985,6 @@ static int get_eccsize(struct mtd_info *mtd)
return 8;
}
-static void ecc_8bit_layout_4k(struct nand_ecclayout *layout)
-{
- int i, j;
-
- layout->eccbytes = 8*18;
- for (i = 0; i < 8; i++)
- for (j = 0; j < 18; j++)
- layout->eccpos[i*18 + j] = i*26 + j + 7;
-
- layout->oobfree[0].offset = 2;
- layout->oobfree[0].length = 4;
- for (i = 1; i < 8; i++) {
- layout->oobfree[i].offset = i*26;
- layout->oobfree[i].length = 7;
- }
-}
-
static void preset_v1(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
@@ -1269,9 +1278,7 @@ static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 1,
@@ -1294,9 +1301,7 @@ static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v1,
- .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv1_hw_eccoob_largepage,
- .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v1_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v1,
.irqpending_quirk = 0,
@@ -1320,9 +1325,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
.check_int = check_int_v1_v2,
.irq_control = irq_control_v1_v2,
.get_ecc_status = get_ecc_status_v2,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_4k,
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v2,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1346,9 +1349,7 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1373,9 +1374,7 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
.check_int = check_int_v3,
.irq_control = irq_control_v3,
.get_ecc_status = get_ecc_status_v3,
- .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
- .ecclayout_2k = &nandv2_hw_eccoob_largepage,
- .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .ooblayout = &mxc_v2_ooblayout_ops,
.select_chip = mxc_nand_select_chip_v1_v3,
.correct_data = mxc_nand_correct_data_v2_v3,
.irqpending_quirk = 0,
@@ -1576,7 +1575,7 @@ static int mxcnd_probe(struct platform_device *pdev)
this->select_chip = host->devtype_data->select_chip;
this->ecc.size = 512;
- this->ecc.layout = host->devtype_data->ecclayout_512;
+ mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
this->ecc.calculate = mxc_nand_calculate_ecc;
@@ -1649,12 +1648,11 @@ static int mxcnd_probe(struct platform_device *pdev)
/* Call preset again, with correct writesize this time */
host->devtype_data->preset(mtd);
- if (mtd->writesize == 2048)
- this->ecc.layout = host->devtype_data->ecclayout_2k;
- else if (mtd->writesize == 4096) {
- this->ecc.layout = host->devtype_data->ecclayout_4k;
- if (get_eccsize(mtd) == 8)
- ecc_8bit_layout_4k(this->ecc.layout);
+ if (!this->ecc.bytes) {
+ if (host->eccsize == 8)
+ this->ecc.bytes = 18;
+ else if (host->eccsize == 4)
+ this->ecc.bytes = 9;
}
/*
--
2.1.4
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v2 00/51] mtd: rework ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 17/51] mtd: onenand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 48/51] mtd: onenand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 49/51] staging: mt29f_spinand: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:10 +0100
[PATCH v2 34/51] mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 29/51] mtd: nand: davinci: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 26/51] mtd: nand: bf5xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 31/51] mtd: nand: diskonchip: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 32/51] mtd: nand: docg4: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 24/51] mtd: nand: jz4740: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 38/51] mtd: nand: jz4780: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 40/51] mtd: nand: mxc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 35/51] mtd: nand: fsmc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 47/51] mtd: nand: vf610: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 46/51] mtd: nand: sunxi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 23/51] mtd: nand: sharpsl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 50/51] mtd: nand: kill the ecc->layout field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 39/51] mtd: nand: lpc32xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 30/51] mtd: nand: denali: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 33/51] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 44/51] mtd: nand: sh_flctl: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 42/51] mtd: nand: pxa3xx: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 36/51] mtd: nand: gpmi: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 41/51] mtd: nand: omap2: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:20 +0100
[PATCH v2 25/51] mtd: nand: atmel: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 19/51] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 02/51] mtd: create an mtd_oobavail() helper and make use of it Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 01/51] mtd: kill the ecclayout->oobavail field Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 28/51] mtd: nand: cafe: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
Re: [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 08:40 +0100
Re: [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 10:30 +0100
[PATCH v2 15/51] mtd: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 08/51] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
Re: [PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate Robert Jarzmik <robert.jarzmik@free.fr> - 2016-02-06 23:00 +0100
[PATCH v2 14/51] mtd: add mtd_set_ecclayout() helper function Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 27/51] mtd: nand: brcm: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 10/51] mtd: nand: gpmi: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 13/51] mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 16/51] mtd: nand: use mtd_set_ecclayout() where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 21/51] mtd: nand: implement the default mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 12/51] mtd: nand: omap2: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 11/51] mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 22/51] mtd: nand: bch: switch to mtd_ooblayout_ops Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:30 +0100
[PATCH v2 04/51] mtd: nand: simplify nand_bch_init() usage Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 03/51] mtd: mtdswap: remove useless if (!mtd->ecclayout) test Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 06/51] mtd: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
[PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
Re: [PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-05 10:40 +0100
[PATCH v2 09/51] mtd: nand: fsl_ifc: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-02-04 11:40 +0100
csiph-web