Re: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control

From	Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control
Date	2017-08-11 07:00 +0200
Message-ID	<udadb-7ng-1@gated-at.bofh.it> (permalink)
References	<ucQ4O-2jh-13@gated-at.bofh.it> <ucQ4O-2jh-11@gated-at.bofh.it> <ucT2G-4pl-21@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hi Philipp,

On 2017年08月10日 19:37, Philipp Zabel wrote:
> Hi Katsuhiro,
> 
> On Thu, 2017-08-10 at 16:27 +0900, Katsuhiro Suzuki wrote:
>> Add a reset line for analog signal amplifier core (ADAMV) on
>> UniPhier LD11/LD20 SoCs.
>>
>>> Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
>> ---
>>   drivers/reset/reset-uniphier.c | 15 +++++++++++++++
>>   1 file changed, 15 insertions(+)
>>
>> diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
>> index f60c137c17cb..cda4a78a58e2 100644
>> --- a/drivers/reset/reset-uniphier.c
>> +++ b/drivers/reset/reset-uniphier.c
>> @@ -196,6 +196,12 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
>>>   	UNIPHIER_RESET_END,
>>   };
>>   
>> +/* Analog signal amplifiers reset data */
>> +static const struct uniphier_reset_data uniphier_ld11_adamv_reset_data[] = {
>>> +	UNIPHIER_RESETX(100, 0x10, 6), /* EVEA */
>>> +	UNIPHIER_RESET_END,
>> +};
>> +
>>   /* core implementaton */
>>   struct uniphier_reset_priv {
>>>   	struct reset_controller_dev rcdev;
>> @@ -415,6 +421,15 @@ static const struct of_device_id uniphier_reset_match[] = {
>>>   		.compatible = "socionext,uniphier-ld20-peri-reset",
>>>   		.data = uniphier_pro4_peri_reset_data,
>>>   	},
>>> +	/* Analog signal amplifiers reset */
>>> +	{
>>> +		.compatible = "socionext,uniphier-ld11-adamv-reset",
>>> +		.data = uniphier_ld11_adamv_reset_data,
>>> +	},
>>> +	{
>>> +		.compatible = "socionext,uniphier-ld20-adamv-reset",
>>> +		.data = uniphier_ld11_adamv_reset_data,
>>> +	},
>>>   	{ /* sentinel */ }
>>   };
>>   MODULE_DEVICE_TABLE(of, uniphier_reset_match);
> 
> Please add a patch to describe the new compatible values in
> Documentation/devicetree/bindings/reset/uniphier-reset.txt.
> 

Thank you, I will add it and send V2 series.


Regards,
--
Katsuhiro Suzuki

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 3/3] reset: uniphier: add analog amplifiers reset control Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> - 2017-08-10 09:30 +0200
  Re: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control Philipp Zabel <p.zabel@pengutronix.de> - 2017-08-10 12:40 +0200
    Re: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control Masahiro Yamada <yamada.masahiro@socionext.com> - 2017-08-10 13:20 +0200
      Re: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control Masahiro Yamada <yamada.masahiro@socionext.com> - 2017-08-10 13:30 +0200
        Re: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> - 2017-08-11 06:30 +0200
    Re: [PATCH 3/3] reset: uniphier: add analog amplifiers reset control Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> - 2017-08-11 07:00 +0200

csiph-web