Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1686561
| From | Maxime Ripard <maxime.ripard@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 16/18] arm: dts: sun8i: a33: Add the DSI-related nodes |
| Date | 2017-07-13 16:20 +0200 |
| Message-ID | <u2N8f-6Ff-25@gated-at.bofh.it> (permalink) |
| References | <u2N8d-6Ff-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The A33 has a MIPI-DSI block, along with its D-PHY. Let's add it in order
to use it in the relevant boards.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a33.dtsi | 50 ++++++++++++++++++++++++++++++++-
1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 22660919bd08..18d1bf9f8e84 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -236,10 +236,14 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_dsi0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi0_in_tcon0>;
+ };
};
};
};
-
crypto: crypto-engine@01c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
@@ -280,6 +284,50 @@
#io-channel-cells = <0>;
};
+ dsi0: dsi@01ca0000 {
+ compatible = "allwinner,sun6i-a31-mipi-dsi";
+ reg = <0x01ca0000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_SCLK>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ phys = <&dphy0>;
+ phy-names = "dphy";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ dsi0_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_dsi0>;
+ };
+ };
+ };
+ };
+
+ dphy0: d-phy@01ca1000 {
+ compatible = "allwinner,sun6i-a31-mipi-dphy";
+ reg = <0x01ca1000 0x1000>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_DPHY>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <0>;
+ };
+
fe0: display-frontend@01e00000 {
compatible = "allwinner,sun8i-a33-display-frontend";
reg = <0x01e00000 0x20000>;
--
git-series 0.9.1
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 00/18] drm/sun4i: Allwinner MIPI-DSI support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable the TCON Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 06/18] drm/sun4i: tcon: Don't rely on encoders to enable the TCON Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:50 +0200
[PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200
Re: [PATCH 04/18] drm/sun4i: Remove useless atomic_check Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
[PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 15/18] drm/panel: Add Huarui LHR050H41 panel driver Andrzej Hajda <a.hajda@samsung.com> - 2017-07-14 11:30 +0200
[PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 08/18] drm/sun4i: tcon: Add TRI finish interrupt for vblank Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
[PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 07/18] drm/sun4i: tcon: Don't rely on encoders to set the TCON mode Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:00 +0200
[PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup kbuild test robot <lkp@intel.com> - 2017-07-14 12:00 +0200
Re: [PATCH 10/18] drm/sun4i: tcon: Move out the tcon0 common setup Chen-Yu Tsai <wens@csie.org> - 2017-07-18 05:50 +0200
[PATCH 16/18] arm: dts: sun8i: a33: Add the DSI-related nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 09/18] drm/sun4i: tcon: Adjust dotclock dividers range Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:20 +0200
[PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Chen-Yu Tsai <wens@csie.org> - 2017-07-14 06:50 +0200
Re: [PATCH 17/18] arm: dts: sun8i: Add BananaPI M2-Magic DTS Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
[PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 13/18] dt-bindings: vendor: Add Huarui Lighting Chen-Yu Tsai <wens@csie.org> - 2017-07-14 10:00 +0200
[PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Mark Brown <broonie@kernel.org> - 2017-07-13 18:10 +0200
Re: [PATCH 01/18] regmap: mmio: Add function to attach a clock Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 11:10 +0200
[PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:10 +0200
Re: [PATCH 02/18] drm/sun4i: Add if statement instead of depends on Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-17 10:50 +0200
[PATCH 18/18] [DO NOT MERGE] arm: dts: sun8i: bpi-m2m: Add DSI display Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
[PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-07-13 16:20 +0200
Re: [PATCH 03/18] drm/sun4i: Realign Makefile padding and reorder it Chen-Yu Tsai <wens@csie.org> - 2017-07-14 05:20 +0200
csiph-web