Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1618026
| From | Florian Fainelli <f.fainelli@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support |
| Date | 2017-04-06 16:00 +0200 |
| Message-ID | <ttg78-MK-19@gated-at.bofh.it> (permalink) |
| References | <tsPqh-Mk-1@gated-at.bofh.it> <tsPqi-Mk-21@gated-at.bofh.it> <tsXQR-69Y-1@gated-at.bofh.it> <ttfXs-HN-15@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 04/06/2017 06:46 AM, Juergen Borleis wrote:
>>> + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
>>> + phy-reset-duration = <200>;
>>> +
>>> + dsa,member = <0 0>;
>>> +
>>> + ports {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + port@0 { /* RMII fixed link to master */
>>> + reg = <0>;
>>> + label = "cpu";
>>> + ethernet = <&master>;
>>> + max-speed = <100>;
>>
>> max-speed does not do anything i think, since there is no adjust_link
>> function.
Since port 0 is the CPU port, we expect to find a fixed PHY for it, so
yes, this won't do much because fixed-link already appropriately limits
the speed.
--
Florian
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
net: dsa: add SMSC/Microchip LAN9303 three port ethernet switch driver Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
[PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Andrew Lunn <andrew@lunn.ch> - 2017-04-05 20:20 +0200
Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 12:30 +0200
Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Andrew Lunn <andrew@lunn.ch> - 2017-04-06 14:00 +0200
Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 15:50 +0200
Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 12:50 +0200
[PATCH 1/4] net: dsa: add support for the SMSC-LAN9303 tagging format Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
Re: [PATCH 1/4] net: dsa: add support for the SMSC-LAN9303 tagging format Andrew Lunn <andrew@lunn.ch> - 2017-04-05 19:20 +0200
Re: [PATCH 1/4] net: dsa: add support for the SMSC-LAN9303 tagging format Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 15:40 +0200
[PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
Re: [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Andrew Lunn <andrew@lunn.ch> - 2017-04-05 20:30 +0200
Re: [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 15:50 +0200
Re: [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Florian Fainelli <f.fainelli@gmail.com> - 2017-04-06 16:00 +0200
[PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
Re: [PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Andrew Lunn <andrew@lunn.ch> - 2017-04-05 21:40 +0200
Re: [PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Florian Fainelli <f.fainelli@gmail.com> - 2017-04-06 16:00 +0200
Re: [PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Andrew Lunn <andrew@lunn.ch> - 2017-04-06 16:30 +0200
csiph-web