Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1618021

Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303

Show all headers | View raw

Hi Andrew,

On Thursday 06 April 2017 13:59:00 Andrew Lunn wrote:
> [...]
> > > Does the MDIO bus go to the outside world? Could there be external
> > > PHYs?
> >
> > ???? This device includes two phys (at port 1 and 2) and these
> > functions are called to detect their state.
>
> Some switches have the MDIO bus available on pins. It is then possible
> to connect additional PHYs on the MDIO bus. If their is an external
> MDIO bus, you should remove the test for phy > phy_base + 2, and allow
> the full range of 32.

Hmm, not sure. You can run this device without a master port and use an 
additional external PHY instead. In this case there is an external MDIO 
available to this external PHY. But I don't know if I can reach this MDIO 
in the same way like the internal MDIO to the built-in PHYs.

> [...]
> > > > +		rc = lan9303_phy_reg_write(chip, chip->phy_addr_sel_strap + 1,
> > > > +					   0, BIT(14) | BIT(11));
> > > > +		rc += lan9303_write_switch_reg(chip, LAN9303_MAC_RX_CFG_1,
> > > > +					       0x02);
> > > > +		rc += lan9303_write_switch_reg(chip, LAN9303_MAC_TX_CFG_1,
> > > > +					       0x56);
> > >
> > > It seems odd that port_enable does not touch the PHY, but
> > > port_disable does. What is this doing?
> >
> > My experience is, the framework powers up the phys by its own in
> > conjunction with calling lan9303_port_enable(), but do not power down
> > them in conjunction with calling lan9303_port_disable(). In v2 I do not
> > touch the phy anymore.
>
> So this is touching the BMCR_PDOWN bit? Using the #define would of
> helped explain this.

Okay.

Juergen

-- 
Pengutronix e.K.                             | Juergen Borleis             |
Industrial Linux Solutions                   | http://www.pengutronix.de/  |

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

net: dsa: add SMSC/Microchip LAN9303 three port ethernet switch driver Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
  [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
    Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the  SMSC-LAN9303 Andrew Lunn <andrew@lunn.ch> - 2017-04-05 20:20 +0200
      Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 12:30 +0200
        Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the  SMSC-LAN9303 Andrew Lunn <andrew@lunn.ch> - 2017-04-06 14:00 +0200
          Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 15:50 +0200
      Re: [PATCH 2/4] net: dsa: add new DSA switch driver for the SMSC-LAN9303 Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 12:50 +0200
  [PATCH 1/4] net: dsa: add support for the SMSC-LAN9303 tagging format Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
    Re: [PATCH 1/4] net: dsa: add support for the SMSC-LAN9303 tagging  format Andrew Lunn <andrew@lunn.ch> - 2017-04-05 19:20 +0200
      Re: [PATCH 1/4] net: dsa: add support for the SMSC-LAN9303 tagging format Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 15:40 +0200
  [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
    Re: [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Andrew Lunn <andrew@lunn.ch> - 2017-04-05 20:30 +0200
      Re: [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Juergen Borleis <jbe@pengutronix.de> - 2017-04-06 15:50 +0200
        Re: [PATCH 3/4] net: dsa: LAN9303: add I2C managed mode support Florian Fainelli <f.fainelli@gmail.com> - 2017-04-06 16:00 +0200
  [PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Juergen Borleis <jbe@pengutronix.de> - 2017-04-05 11:30 +0200
    Re: [PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Andrew Lunn <andrew@lunn.ch> - 2017-04-05 21:40 +0200
      Re: [PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Florian Fainelli <f.fainelli@gmail.com> - 2017-04-06 16:00 +0200
        Re: [PATCH 4/4] net: dsa: LAN9303: add MDIO managed mode support Andrew Lunn <andrew@lunn.ch> - 2017-04-06 16:30 +0200

csiph-web