Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for I2C EEPROM

From	Javier Martinez Canillas <javier@dowhile0.org>
Newsgroups	linux.kernel
Subject	Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for I2C EEPROM
Date	2017-05-23 16:00 +0200
Message-ID	<tKivT-3WY-1@gated-at.bofh.it> (permalink)
References	<tJWc1-6Hl-3@gated-at.bofh.it> <tJWc2-6Hl-21@gated-at.bofh.it> <tKimd-3Tp-7@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hello Rob,

On Tue, May 23, 2017 at 3:42 PM, Rob Herring <robh@kernel.org> wrote:
> On Mon, May 22, 2017 at 9:02 AM, Javier Martinez Canillas
> <javier@dowhile0.org> wrote:
>> The at24 driver allows to register I2C EEPROM chips using different vendor
>> and devices, but the I2C subsystem does not take the vendor into account
>> when matching using the I2C table since it only has device entries.
>>
>> But when matching using an OF table, both the vendor and device has to be
>> taken into account so the driver defines only a set of compatible strings
>> using the "atmel" vendor as a generic fallback for compatible I2C devices.
>>
>> So add this generic fallback to the device node compatible string to make
>> the device to match the driver using the OF device ID table.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
>>
>> ---
>>
>> Changes in v4:
>> - Only use the atmel manufacturer in the compatible string instead of
>>   keeping the deprecated ones (Rob Herring).
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>>  arch/powerpc/boot/dts/mpc8308_p1m.dts  | 2 +-
>>  arch/powerpc/boot/dts/mpc8349emitx.dts | 4 ++--
>>  arch/powerpc/boot/dts/mpc8377_rdb.dts  | 2 +-
>>  arch/powerpc/boot/dts/mpc8377_wlan.dts | 2 +-
>>  arch/powerpc/boot/dts/mpc8378_rdb.dts  | 2 +-
>>  arch/powerpc/boot/dts/mpc8379_rdb.dts  | 2 +-
>>  6 files changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
>> index 57f86cdf9f36..702ab4fc5b4a 100644
>> --- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
>> +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
>> @@ -123,7 +123,7 @@
>>                         interrupt-parent = <&ipic>;
>>                         dfsrr;
>>                         fram@50 {
>> -                               compatible = "ramtron,24c64";
>> +                               compatible = "atmel,24c64";
>
> This should be '"ramtron,24c64", "atmel,24c64"'
>

Yes, I (hopefully) fixed all the occurrences in the v5 that I posted
today, you are cc'ed on that series too.

Again, sorry for misunderstanding your comment on v3.

Best regards,
Javier

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v4 19/20] powerpc/83xx: Add generic compatible string for I2C EEPROM Javier Martinez Canillas <javier@dowhile0.org> - 2017-05-22 16:10 +0200
  Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for  I2C EEPROM Rob Herring <robh@kernel.org> - 2017-05-23 15:50 +0200
    Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for  I2C EEPROM Javier Martinez Canillas <javier@dowhile0.org> - 2017-05-23 16:00 +0200

csiph-web