Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for I2C EEPROM

From	Rob Herring <robh@kernel.org>
Newsgroups	linux.kernel
Subject	Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for I2C EEPROM
Date	2017-05-23 15:50 +0200
Message-ID	<tKimd-3Tp-7@gated-at.bofh.it> (permalink)
References	<tJWc1-6Hl-3@gated-at.bofh.it> <tJWc2-6Hl-21@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Mon, May 22, 2017 at 9:02 AM, Javier Martinez Canillas
<javier@dowhile0.org> wrote:
> The at24 driver allows to register I2C EEPROM chips using different vendor
> and devices, but the I2C subsystem does not take the vendor into account
> when matching using the I2C table since it only has device entries.
>
> But when matching using an OF table, both the vendor and device has to be
> taken into account so the driver defines only a set of compatible strings
> using the "atmel" vendor as a generic fallback for compatible I2C devices.
>
> So add this generic fallback to the device node compatible string to make
> the device to match the driver using the OF device ID table.
>
> Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
>
> ---
>
> Changes in v4:
> - Only use the atmel manufacturer in the compatible string instead of
>   keeping the deprecated ones (Rob Herring).
>
> Changes in v3: None
> Changes in v2: None
>
>  arch/powerpc/boot/dts/mpc8308_p1m.dts  | 2 +-
>  arch/powerpc/boot/dts/mpc8349emitx.dts | 4 ++--
>  arch/powerpc/boot/dts/mpc8377_rdb.dts  | 2 +-
>  arch/powerpc/boot/dts/mpc8377_wlan.dts | 2 +-
>  arch/powerpc/boot/dts/mpc8378_rdb.dts  | 2 +-
>  arch/powerpc/boot/dts/mpc8379_rdb.dts  | 2 +-
>  6 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
> index 57f86cdf9f36..702ab4fc5b4a 100644
> --- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
> +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
> @@ -123,7 +123,7 @@
>                         interrupt-parent = <&ipic>;
>                         dfsrr;
>                         fram@50 {
> -                               compatible = "ramtron,24c64";
> +                               compatible = "atmel,24c64";

This should be '"ramtron,24c64", "atmel,24c64"'

>                                 reg = <0x50>;
>                         };
>                 };
> diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
> index 90aed3ac2f69..f49d1cffd927 100644
> --- a/arch/powerpc/boot/dts/mpc8349emitx.dts
> +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
> @@ -92,7 +92,7 @@
>                         dfsrr;
>
>                         eeprom: at24@50 {
> -                               compatible = "st,24c256";
> +                               compatible = "atmel,24c256";

Similar for this one.

>                                 reg = <0x50>;
>                         };
>
> @@ -130,7 +130,7 @@
>                         };
>
>                         spd: at24@51 {
> -                               compatible = "at24,spd";
> +                               compatible = "atmel,spd";

This is fine because at24 is not a vendor.

Rob

Thread

[PATCH v4 19/20] powerpc/83xx: Add generic compatible string for I2C EEPROM Javier Martinez Canillas <javier@dowhile0.org> - 2017-05-22 16:10 +0200
  Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for  I2C EEPROM Rob Herring <robh@kernel.org> - 2017-05-23 15:50 +0200
    Re: [PATCH v4 19/20] powerpc/83xx: Add generic compatible string for  I2C EEPROM Javier Martinez Canillas <javier@dowhile0.org> - 2017-05-23 16:00 +0200

csiph-web