Re: [PATCH 1/2] wcn36xx: Pass used skb to ieee80211_tx_status()

From	Kalle Valo <kvalo@qca.qualcomm.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 1/2] wcn36xx: Pass used skb to ieee80211_tx_status()
Date	2017-05-04 15:20 +0200
Message-ID	<tDoPM-3W2-7@gated-at.bofh.it> (permalink)
References	<tADii-8v0-13@gated-at.bofh.it> <tAMYh-6lN-5@gated-at.bofh.it> <tBnOa-6li-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Bjorn Andersson <bjorn.andersson@linaro.org> writes:

> On Thu 27 Apr 01:22 PDT 2017, Johannes Berg wrote:
>
>> 
>> > @@ -371,7 +371,7 @@ static void reap_tx_dxes(struct wcn36xx *wcn,
>> > struct wcn36xx_dxe_ch *ch)
>> >  			info = IEEE80211_SKB_CB(ctl->skb);
>> >  			if (!(info->flags &
>> > IEEE80211_TX_CTL_REQ_TX_STATUS)) {
>> >  				/* Keep frame until TX status comes
>> > */
>> > -				ieee80211_free_txskb(wcn->hw, ctl-
>> > >skb);
>> > +				ieee80211_tx_status(wcn->hw, ctl-
>> > >skb);
>> > 
>> 
>> I don't think this is a good idea.
>
> Thanks for letting me know :)
>
>> This code intentionally checked if TX status was requested, and if not
>> then it doesn't go to the effort of building it.
>> 
>
> What I'm finding puzzling is the fact that the only caller of
> ieee80211_led_tx() is ieee80211_tx_status() and it seems like drivers,
> such as ath10k, call this for each packet handled - but I'm likely
> missing something.
>
>> As it is with your patch, it'll go and report the TX status without any
>> TX status information - which is handled in wcn36xx_dxe_tx_ack_ind()
>> for those frames needing it.
>> 
>
> Right, it doesn't sound desired. However, during normal operation I'm
> not seeing IEEE80211_TX_CTL_REQ_TX_STATUS being set and as such
> ieee80211_led_tx() is never called.

So what's the conclusion? How do we get leds working?

-- 
Kalle Valo

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 1/2] wcn36xx: Pass used skb to ieee80211_tx_status() Bjorn Andersson <bjorn.andersson@linaro.org> - 2017-04-27 00:10 +0200
  [PATCH 2/2] arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger Bjorn Andersson <bjorn.andersson@linaro.org> - 2017-04-27 00:10 +0200
  Re: [PATCH 1/2] wcn36xx: Pass used skb to ieee80211_tx_status() Johannes Berg <johannes@sipsolutions.net> - 2017-04-27 10:30 +0200
    Re: [PATCH 1/2] wcn36xx: Pass used skb to ieee80211_tx_status() Bjorn Andersson <bjorn.andersson@linaro.org> - 2017-04-29 01:50 +0200
      Re: [PATCH 1/2] wcn36xx: Pass used skb to ieee80211_tx_status() Kalle Valo <kvalo@qca.qualcomm.com> - 2017-05-04 15:20 +0200

csiph-web