Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1512519
| From | Lukasz Majewski <l.majewski@majess.pl> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation |
| Date | 2016-10-31 13:00 +0100 |
| Message-ID | <syjpT-1Qu-27@gated-at.bofh.it> (permalink) |
| References | <swMw2-6AV-11@gated-at.bofh.it> <swMFH-6I9-7@gated-at.bofh.it> <swNBL-7i8-3@gated-at.bofh.it> <sydXc-6Z3-15@gated-at.bofh.it> <syhep-us-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
[Multipart message — attachments visible in raw view] - view raw
Hi Sascha,
> On Mon, Oct 31, 2016 at 06:59:04AM +0100, Sascha Hauer wrote:
> > On Thu, Oct 27, 2016 at 09:40:05AM +0200, Boris Brezillon wrote:
> > > On Thu, 27 Oct 2016 08:29:39 +0200
> > > Lukasz Majewski <l.majewski@majess.pl> wrote:
> > >
> > > > The code has been rewritten to remove "generic" calls to
> > > > imx_pwm_{enable|disable|config}.
> > > >
> > > > Such approach would facilitate switch to atomic PWM (a.k.a
> > > > ->apply()) implementation.
> > > >
> > > > Suggested-by: Stefan Agner <stefan@agner.ch>
> > > > Suggested-by: Boris Brezillon
> > > > <boris.brezillon@free-electrons.com> Signed-off-by: Lukasz
> > > > Majewski <l.majewski@majess.pl> ---
> > > > Changes for v2:
> > > > - Add missing clock unprepare for clk_ipg
> > > > - Enable peripheral PWM clock (clk_per)
> > > > ---
> > > > drivers/pwm/pwm-imx.c | 50
> > > > ++++++++++++++++++++++++++++++++++++++------------ 1 file
> > > > changed, 38 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
> > > > index ea3ce79..822eb5a 100644
> > > > --- a/drivers/pwm/pwm-imx.c
> > > > +++ b/drivers/pwm/pwm-imx.c
> > > > @@ -65,8 +65,6 @@ struct imx_chip {
> > > > static int imx_pwm_config_v1(struct pwm_chip *chip,
> > > > struct pwm_device *pwm, int duty_ns, int
> > > > period_ns) {
> > > > - struct imx_chip *imx = to_imx_chip(chip);
> > > > -
> > > > /*
> > > > * The PWM subsystem allows for exact frequencies.
> > > > However,
> > > > * I cannot connect a scope on my device to the PWM
> > > > line and @@ -84,26 +82,56 @@ static int
> > > > imx_pwm_config_v1(struct pwm_chip *chip,
> > > > * both the prescaler (/1 .. /128) and then by CLKSEL
> > > > * (/2 .. /16).
> > > > */
> > > > + struct imx_chip *imx = to_imx_chip(chip);
> > > > u32 max = readl(imx->mmio_base + MX1_PWMP);
> > > > u32 p = max * duty_ns / period_ns;
> > > > + int ret;
> > > > +
> > > > + ret = clk_prepare_enable(imx->clk_ipg);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > writel(max - p, imx->mmio_base + MX1_PWMS);
> > > >
> > > > + clk_disable_unprepare(imx->clk_ipg);
> > > > +
> > > > return 0;
> > > > }
> > > >
> > > > -static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool
> > > > enable) +static int imx_pwm_enable_v1(struct pwm_chip *chip,
> > > > struct pwm_device *pwm) {
> > > > struct imx_chip *imx = to_imx_chip(chip);
> > > > + int ret;
> > > > u32 val;
> > > >
> > > > + ret = clk_prepare_enable(imx->clk_ipg);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = clk_prepare_enable(imx->clk_per);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > val = readl(imx->mmio_base + MX1_PWMC);
> > > > + val |= MX1_PWMC_EN;
> > > > + writel(val, imx->mmio_base + MX1_PWMC);
> > > >
> > > > - if (enable)
> > > > - val |= MX1_PWMC_EN;
> > > > - else
> > > > - val &= ~MX1_PWMC_EN;
> > > > + clk_disable_unprepare(imx->clk_ipg);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void imx_pwm_disable_v1(struct pwm_chip *chip, struct
> > > > pwm_device *pwm) +{
> > > > + struct imx_chip *imx = to_imx_chip(chip);
> > > > + u32 val;
> > > > +
> > > > + val = readl(imx->mmio_base + MX1_PWMC);
> > > > + val &= ~MX1_PWMC_EN;
> > > >
> > > > writel(val, imx->mmio_base + MX1_PWMC);
> > >
> > > Are you sure you don't need to enable the ipg clk when
> > > manipulating the PWMC register?
> > > If it's not needed here, then it's probably not needed in
> > > imx_pwm_enable_v1() either.
> >
> > As said, even the commit 7b27c160c68 introducing the register clk
> > did not enable the clock consistently for all register accesses.
> > Maybe it's best to include the following patch so that we can find
> > a clear culprit and do not bury the ipg clock changes in larger
> > patches.
> >
> > Sascha
> >
> > -----------------------------8<-----------------------------------
> >
> > From 30b77e83269a58c2cb5ce6de8be647e027030d34 Mon Sep 17 00:00:00
> > 2001 From: Sascha Hauer <s.hauer@pengutronix.de>
> > Date: Mon, 31 Oct 2016 06:45:33 +0100
> > Subject: [PATCH] pwm: imx: remove ipg clock
> >
> > The use of the ipg clock was introduced with commit 7b27c160c6. In
> > the commit message it was claimed that the ipg clock is enabled for
> > register accesses. This is true for the ->config() callback, but
> > not for the ->set_enable() callback. Given that the ipg clock is
> > not consistently enabled for all register accesses we can assume
> > that either it is not required at all or that the current code does
> > not work. Remove the ipg clock code for now so that it's no longer
> > in the way of refactoring the driver.
>
> For reference:
>
> I verified on i.MX53 and i.MX25 that the ipg clock provided to the pwm
> driver is not needed when accessing registers.
In the v3 of the patch series (almost done) I can confirm that i.MX6q
works without ipg clock manipulation to access registers.
> I would have to verify
> that on i.MX27 aswell, but I do not have a board handy at the moment.
>
> The current assumption as discussed by Philipp and me is that the ipg
> clk is only needed when the pwm output is driven by the ipg clk
> (MX3_PWMCR[16:17] = MX3_PWMCR_CLKSRC_IPG)
Interresting .... I must check if I'm able to test this on my (rather)
not accessible HW.
Best regards,
Łukasz Majewski
>
> Sascha
>
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v2 00/10] pwm: imx: Provide atomic operation for IMX PWM driver Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:40 +0200
[PATCH v2 06/10] pwm: imx: Provide atomic PWM support for i.MX PWMv2 Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:40 +0200
[PATCH v2 04/10] pwm: imx: Move PWMv2 software reset code to a separate function Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:40 +0200
Re: [PATCH v2 04/10] pwm: imx: Move PWMv2 software reset code to a separate function Philipp Zabel <p.zabel@pengutronix.de> - 2016-11-03 10:40 +0100
[PATCH v2 02/10] pwm: imx: Add separate set of pwm ops for PWMv1 and PWMv2 Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:40 +0200
[PATCH v2 05/10] pwm: imx: Move PWMv2 wait for fifo slot code to a separate function Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:50 +0200
[PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:50 +0200
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-10-27 09:50 +0200
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 16:40 +0200
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Sascha Hauer <s.hauer@pengutronix.de> - 2016-10-31 07:10 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski <l.majewski@majess.pl> - 2016-10-31 09:20 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Sascha Hauer <s.hauer@pengutronix.de> - 2016-10-31 10:30 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Sascha Hauer <s.hauer@pengutronix.de> - 2016-10-31 10:40 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski <l.majewski@majess.pl> - 2016-10-31 13:00 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski <l.majewski@majess.pl> - 2016-11-01 07:00 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Sascha Hauer <s.hauer@pengutronix.de> - 2016-11-01 08:20 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lukasz Majewski <l.majewski@majess.pl> - 2016-11-01 09:30 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Sascha Hauer <s.hauer@pengutronix.de> - 2016-11-01 10:00 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lothar Waßmann <LW@KARO-electronics.de> - 2016-11-02 08:40 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Sascha Hauer <s.hauer@pengutronix.de> - 2016-11-02 08:40 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lothar Waßmann <LW@KARO-electronics.de> - 2016-11-02 09:00 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Sascha Hauer <s.hauer@pengutronix.de> - 2016-11-02 09:10 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Lothar Waßmann <LW@KARO-electronics.de> - 2016-11-02 10:00 +0100
Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Philipp Zabel <p.zabel@pengutronix.de> - 2016-11-02 10:40 +0100
[PATCH v2 08/10] pwm: core: make the PWM_POLARITY flag in DTB optional Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:50 +0200
[PATCH v2 10/10] pwm: imx: Add polarity inversion support to i.MX's PWMv2 Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:50 +0200
[PATCH v2 07/10] pwm: imx: Remove redundant i.MX PWMv2 code Lukasz Majewski <l.majewski@majess.pl> - 2016-10-27 08:50 +0200
csiph-web