[RESEND PATCH v2 0/3] mtd: use ONFI bad blocks per LUN to calculate UBI bad PEB limit

Path	csiph.com!aioe.org!bofh.it!news.nic.it!robomod
From	Zach Brown <zach.brown@ni.com>
Newsgroups	linux.kernel
Subject	[RESEND PATCH v2 0/3] mtd: use ONFI bad blocks per LUN to calculate UBI bad PEB limit
Date	Thu, 27 Oct 2016 21:20:01 +0200
Message-ID	<swYnv-60b-3@gated-at.bofh.it> (permalink)
X-Original-To	<dwmw2@infradead.org>
X-Mailer	git-send-email 2.7.4
X-Mimetrack	Itemize by SMTP Server on US-AUS-MGWOut2/AUS/H/NIC(Release 8.5.3FP6 HF1218\|December 12, 2014) at 10/27/2016 02:13:57 PM, Serialize by Router on US-AUS-MGWOut2/AUS/H/NIC(Release 8.5.3FP6 HF1218\|December 12, 2014) at 10/27/2016 02:13:57 PM, Serialize complete at 10/27/2016 02:13:57 PM
MIME-Version	1.0
Content-Type	text/plain
X-Proofpoint-Virus-Version	vendor=fsecure engine=2.50.10432:,, definitions=2016-10-27_12:,, signatures=0
X-Proofpoint-Spam-Details	rule=notspam policy=default score=0 spamscore=0 suspectscore=1 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1609300000 definitions=main-1610270314
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	36
Organization	linux.* mail to news gateway
X-Original-Cc	<computersforpeace@gmail.com>, <boris.brezillon@free-electrons.com>, <richard@nod.at>, <dedekind1@gmail.com>, <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
X-Original-Date	Thu, 27 Oct 2016 14:13:59 -0500
X-Original-Message-ID	<1477595642-11454-1-git-send-email-zach.brown@ni.com>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1510586

Show key headers only | View raw

For ONFI-compliant NAND devices, the ONFI parameters report the maximum number
of bad blocks per LUN that will be encountered over the lifetime of the device,
so we can use that information to get a more accurate (and smaller) value for
the UBI bad PEB limit.

The ONFI parameter "maxiumum number of bad blocks per LUN" is the max number of
bad blocks that each individual LUN will ever ecounter. It is not the number of
bad blocks to reserve for the nand device per LUN in the device.

This means that in the worst case a UBI device spanning X LUNs will encounter
"maximum number of bad blocks per LUN" * X bad blocks. The implementation in
this patch assumes this worst case and allocates bad block accordingly.

These patches are ordered in terms of their dependencies, but ideally, all 3
would need to be applied for this to work as intended.

v1:
 * Changed commit message to address concerns from v1[1] about this patch set
   making best case assumptions.

[1]
http://lkml.iu.edu/hypermail/linux/kernel/1505.1/04822.html

Jeff Westfahl (3):
  mtd: introduce function max_bad_blocks
  mtd: nand: implement 'max_bad_blocks' mtd function
  mtd: ubi: use 'max_bad_blocks' to compute bad_peb_limit if available

 drivers/mtd/mtdpart.c        | 12 ++++++++++++
 drivers/mtd/nand/nand_base.c | 34 ++++++++++++++++++++++++++++++++++
 drivers/mtd/ubi/build.c      |  9 +++++++++
 include/linux/mtd/mtd.h      |  1 +
 4 files changed, 56 insertions(+)

-- 
2.7.4

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[RESEND PATCH v2 0/3] mtd: use ONFI bad blocks per LUN to calculate UBI bad PEB limit Zach Brown <zach.brown@ni.com> - 2016-10-27 21:20 +0200
  [RESEND PATCH v2 2/3] mtd: nand: implement 'max_bad_blocks' mtd function Zach Brown <zach.brown@ni.com> - 2016-10-27 21:20 +0200
    Re: [RESEND PATCH v2 2/3] mtd: nand: implement 'max_bad_blocks' mtd  function Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-10-27 22:10 +0200
  [RESEND PATCH v2 1/3] mtd: introduce function max_bad_blocks Zach Brown <zach.brown@ni.com> - 2016-10-27 21:20 +0200
    Re: [RESEND PATCH v2 1/3] mtd: introduce function max_bad_blocks Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-10-27 22:10 +0200
  [RESEND PATCH v2 3/3] mtd: ubi: use 'max_bad_blocks' to compute bad_peb_limit if available Zach Brown <zach.brown@ni.com> - 2016-10-27 21:20 +0200
    Re: [RESEND PATCH v2 3/3] mtd: ubi: use 'max_bad_blocks' to compute  bad_peb_limit if available Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-10-27 22:10 +0200
  Re: [RESEND PATCH v2 0/3] mtd: use ONFI bad blocks per LUN to  calculate UBI bad PEB limit Boris Brezillon <boris.brezillon@free-electrons.com> - 2016-10-27 22:00 +0200

csiph-web