[PATCH 2/2] ARM: dts: at91: Modify information in LED nodes.

From	Raashid Muhammed <raashidmuhammed@zilogic.com>
Newsgroups	linux.kernel
Subject	[PATCH 2/2] ARM: dts: at91: Modify information in LED nodes.
Date	2016-06-24 15:40 +0200
Message-ID	<rNzuV-cP-1@gated-at.bofh.it> (permalink)
References	<rNzuV-cP-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Add power led node and rename status led node.

Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com>
Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
---
 arch/arm/boot/dts/at91-sam9_l9260.dts | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index be409f2..814753a 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -106,11 +106,16 @@
 	leds {
 		compatible = "gpio-leds";
 
-		b0 {
-			label = "b0";
-			gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
 		};
 
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
 	};
 };
-- 
2.1.4

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 2/2] ARM: dts: at91: Modify information in LED nodes. Raashid Muhammed <raashidmuhammed@zilogic.com> - 2016-06-24 15:40 +0200
  Re: [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes. Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2016-06-24 15:50 +0200
    Re: [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes. raashidmuhammed <raashidmuhammed@zilogic.com> - 2016-06-24 16:00 +0200
    Re: [PATCH 2/2] ARM: dts: at91: Modify information in LED nodes. Raashid Muhammed <raashidmuhammed@zilogic.com> - 2016-06-24 16:40 +0200

csiph-web