[PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and switch labels

Path	csiph.com!eternal-september.org!feeder.eternal-september.org!aioe.org!gothmog.csi.it!bofh.it!news.nic.it!robomod
From	Chen-Yu Tsai <wens@csie.org>
Newsgroups	linux.kernel
Subject	[PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and switch labels
Date	Wed, 08 Jun 2016 09:40:01 +0200
Message-ID	<rHGfL-5Ap-9@gated-at.bofh.it> (permalink)
X-Original-To	Maxime Ripard <maxime.ripard@free-electrons.com>
X-Mailer	git-send-email 2.8.1
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	45
Organization	linux.* mail to news gateway
X-Original-Cc	Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
X-Original-Date	Wed, 8 Jun 2016 15:36:26 +0800
X-Original-Message-ID	<1465371386-14479-1-git-send-email-wens@csie.org>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1416981

Show key headers only | View raw

The switch is clearly labeled "power" on the board.

The LED is red, and is lit by default through an external pull up.
Label it as "pwr" even though there is no explicit marking.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

Hi Maxime,

This patch fixes 2 copy paste errors in the bpi-m2+ dts that slipped
through. Can you squash it into my original patch?


Thanks
ChenYu

---
 arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts
index 8a19b4b44f1f..8387c458d615 100644
--- a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts
@@ -67,7 +67,7 @@
 		pinctrl-0 = <&pwr_led_bpi_m2p>;
 
 		pwr_led {
-			label = "orangepi:green:pwr";
+			label = "bpi-m2+:red:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 			default-state = "on";
 		};
@@ -79,7 +79,7 @@
 		pinctrl-0 = <&sw_r_bpi_m2p>;
 
 		sw4 {
-			label = "sw4";
+			label = "power";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 		};
-- 
2.8.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and switch labels Chen-Yu Tsai <wens@csie.org> - 2016-06-08 09:40 +0200
  Re: [PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and  switch labels Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-09 21:00 +0200

csiph-web